Patchwork U-Boot

login
register
mail settings

Incoming patches

« Previous 1 2 ... 6 7 8 9 10 11 12 13 14 ... 439 440 Next »
Filters: Archived = No remove filter
Patch A/R/T Date Submitter Delegate State
[U-Boot,01/15,v2] power: pmic: add pfuze3000 support 0 0 0 2015-07-21 Adrian Alonso sbabic Changes Requested
[U-Boot,v3] imx: imximage: add new CHECK/CLR BIT command 0 0 0 2015-07-21 Adrian Alonso sbabic Awaiting Upstream
[U-Boot,v2,16/16] apalis/colibri_t30: fix usb dm regression 0 0 0 2015-07-20 Marcel Ziswiler New
[U-Boot,v2,15/16] colibri_t20: fix reset out pin 0 0 0 2015-07-20 Marcel Ziswiler New
[U-Boot,v2,14/16] apalis/colibri_t20/30: clean-up 0 0 0 2015-07-20 Marcel Ziswiler New
[U-Boot,v2,13/16] apalis/colibri_t20/t30: increase tftp blocksize 0 1 0 2015-07-20 Marcel Ziswiler New
[U-Boot,v2,12/16] apalis/colibri_t20/t30: enable raw initrd support 0 1 0 2015-07-20 Marcel Ziswiler New
[U-Boot,v2,11/16] colibri_t20: enable ubi/ubifs support 0 0 0 2015-07-20 Marcel Ziswiler New
[U-Boot,v2,10/16] colibri_t20: enable mtdparts support 0 1 0 2015-07-20 Marcel Ziswiler New
[U-Boot,v2,09/16] mtd/nand/tegra: alignment workaround 0 0 0 2015-07-20 Marcel Ziswiler New
[U-Boot,v2,08/16] tegra: nand: fix read_byte required for proper onfi detection 0 0 0 2015-07-20 Marcel Ziswiler New
[U-Boot,v2,07/16] colibri_t20: disable PMIC sleep mode on low supply voltage 0 1 0 2015-07-20 Marcel Ziswiler New
[U-Boot,v2,06/16] colibri_t20: add i2c support 0 1 0 2015-07-20 Marcel Ziswiler New
[U-Boot,v2,05/16] colibri_t20: add lcd display support 0 1 0 2015-07-20 Marcel Ziswiler New
[U-Boot,v2,04/16] colibri_t20: fix device-tree compatible node 0 1 0 2015-07-20 Marcel Ziswiler New
[U-Boot,v2,03/16] apalis/colibri_t20/t30: integrate recovery mode detection 0 0 0 2015-07-20 Marcel Ziswiler New
[U-Boot,v2,02/16] ARM: tegra: allow reading recovery mode boot type 0 1 0 2015-07-20 Marcel Ziswiler New
[U-Boot,v2,01/16] ARM: tegra: allow custom usb manufacturer/product/vendor ids/strings 0 1 0 2015-07-20 Marcel Ziswiler New
[U-Boot] Please pull u-boot-fsl-qoriq master 0 0 0 2015-07-20 York Sun trini Accepted
[U-Boot,v2,6/6] arm/rpi: Enable dcache 0 0 0 2015-07-20 Alexander Stein New
[U-Boot,v2,5/6] arm/mach-bcm283x/mbox: Flush and invalidate dcache when using fw mailbox 0 0 0 2015-07-20 Alexander Stein New
[U-Boot,v2,4/6] ARM: bcm283x: Allocate all mailbox buffers cacheline aligned 0 0 0 2015-07-20 Alexander Stein New
[U-Boot,v2,3/6] ARM: bcm283x: Define CONFIG_SYS_CACHELINE_SIZE 0 0 0 2015-07-20 Alexander Stein New
[U-Boot,v2,2/6] arm1136/arm1176: Merge cache handling code 0 0 0 2015-07-20 Alexander Stein New
[U-Boot,v2,1/6] arm1136: Remove dead code 0 0 0 2015-07-20 Alexander Stein New
[U-Boot] Update the rootfs type to ext4 for Overo and Pepper 1 0 0 2015-07-20 Adam YH Lee trini Under Review
[U-Boot,4/4] arm: rmobile: Add Stout board support 0 0 0 2015-07-20 Vladimir Barinov New
[U-Boot,3/4] arch: rmobile: add SCIFA port base offsets 0 0 0 2015-07-20 Vladimir Barinov New
[U-Boot,2/4] serial: serial-sh: SCIFA interface for R-Car Gen2 SoCs 0 0 0 2015-07-20 Vladimir Barinov New
[U-Boot,1/4] gpio: sh-pfc: fix gpio input read 0 0 0 2015-07-20 Vladimir Barinov New
[U-Boot] lib/fdtdec: Fix fdt_addr_t and fdt_size_t typedef 0 0 0 2015-07-20 York Sun yorksun Superseded
[U-Boot] Please pull u-boot-fdt 0 0 0 2015-07-20 Simon Glass trini Accepted
[U-Boot,12/12] sniper: Keypad support, with recovery and fastboot key combinations 0 1 0 2015-07-20 Paul Kocialkowski trini New
[U-Boot,11/12] sniper: Power off when the power on reason is not a valid one 0 1 0 2015-07-20 Paul Kocialkowski trini New
[U-Boot,10/12] sniper: Power button reset support 0 1 0 2015-07-20 Paul Kocialkowski trini New
[U-Boot,09/12] sniper: Fastboot support 0 1 0 2015-07-20 Paul Kocialkowski trini New
[U-Boot,08/12] sniper: Pass serial number through ATAG 0 1 0 2015-07-20 Paul Kocialkowski trini New
[U-Boot,07/12] sniper: Serial number support, obtained from die ID 0 0 0 2015-07-20 Paul Kocialkowski trini New
[U-Boot,06/12] sniper: OMAP3 reboot mode support 0 1 0 2015-07-20 Paul Kocialkowski trini New
[U-Boot,05/12] LG Optimus Black (P970) codename sniper support 0 1 0 2015-07-20 Paul Kocialkowski trini New
[U-Boot,04/12] omap3: Reboot mode support 0 1 0 2015-07-20 Paul Kocialkowski trini New
[U-Boot,03/12] input: twl4030: Keypad scan and input 0 1 0 2015-07-20 Paul Kocialkowski trini New
[U-Boot,02/12] input: TWL4030 input support for power button, USB and charger 0 1 0 2015-07-20 Paul Kocialkowski trini New
[U-Boot,01/12] power: twl4030: Power off support 0 1 0 2015-07-20 Paul Kocialkowski trini New
[U-Boot,v2,3/3] sunxi: nand: Add information to sunxi that it was run from NAND in SPL 0 0 0 2015-07-20 Piotr Zierhoffer New
[U-Boot,v2,2/3] sunxi: nand: Add board configuration options 0 0 0 2015-07-20 Piotr Zierhoffer New
[U-Boot,v2,1/3] sunxi: nand: Add basic sunxi NAND driver for SPL with DMA support 0 0 0 2015-07-20 Piotr Zierhoffer New
[U-Boot,1/1] spi: tegra20: Add support for mode selection 0 0 0 2015-07-20 Mirza Krak New
[U-Boot,1/1] ARM: tegra: Add Tegra20 SPI device nodes 0 0 0 2015-07-20 Mirza Krak New
[U-Boot,v3,15/15] imx: mx6ul_14x14_evk add basic board support 0 0 0 2015-07-20 Peng Fan sbabic Awaiting Upstream
[U-Boot,v3,14/15] imx: imx6_spl add mx6ul support 0 0 0 2015-07-20 Peng Fan sbabic Awaiting Upstream
[U-Boot,v3,13/15] imx:mx6ul add dram spl configuration and header file 0 0 0 2015-07-20 Peng Fan sbabic Awaiting Upstream
[U-Boot,v3,12/15] mx6_common: Fix LOADADDR and SYS_TEXT_BASE for i.MX6UL 0 0 0 2015-07-20 Peng Fan sbabic Awaiting Upstream
[U-Boot,v3,11/15] mxc: gpio add i.MX6UL support 0 0 0 2015-07-20 Peng Fan sbabic Awaiting Upstream
[U-Boot,v3,10/15] imx: mx6 add PAD_CTL_SPEED_LOW for i.MX6SX/UL 0 0 0 2015-07-20 Peng Fan sbabic Awaiting Upstream
[U-Boot,v3,09/15] imx: mx6ul update soc related settings 0 0 0 2015-07-20 Peng Fan sbabic Awaiting Upstream
[U-Boot,v3,08/15] imx: mx6ul select SYS_L2CACHE_OFF 0 0 0 2015-07-20 Peng Fan sbabic Awaiting Upstream
[U-Boot,v3,07/15] imx:mx6ul add clock support 0 0 0 2015-07-20 Peng Fan sbabic Awaiting Upstream
[U-Boot,v3,06/15] imx: mx6ul remove errata for i.MX6UL 0 0 0 2015-07-20 Peng Fan sbabic Awaiting Upstream
[U-Boot,v3,05/15] imx-common: timer: add i.MX6UL support 0 0 0 2015-07-20 Peng Fan sbabic Awaiting Upstream
[U-Boot,v3,04/15] imx: mx6ul Add CONFIG_SYS_CACHELINE_SIZE for i.MX6UL 0 0 0 2015-07-20 Peng Fan sbabic Awaiting Upstream
[U-Boot,v3,03/15] imx: mx6ul: Update imx registers head file 0 0 0 2015-07-20 Peng Fan sbabic Awaiting Upstream
[U-Boot,v3,02/15] imx: mx6ul: Add pins IOMUX head file 0 0 0 2015-07-20 Peng Fan sbabic Awaiting Upstream
[U-Boot,v3,01/15] imx: mx6ul: Add i.MX6UL CPU type 0 0 0 2015-07-20 Peng Fan sbabic Awaiting Upstream
[U-Boot,v2] usb: CONFIG_USB_FASTBOOT prefix replacement for consistency 0 0 0 2015-07-20 Paul Kocialkowski bobenstein Accepted
[U-Boot,GIT] Pull request: u-boot-dfu 0 0 0 2015-07-20 Łukasz Majewski marex Accepted
[U-Boot,3/3] mtd: nand: mxs invalidate dcache before DMA read 1 0 0 2015-07-20 Peng Fan New
[U-Boot,2/3] mtd: nand: mxs check maximum ecc that platfrom supports 0 1 0 2015-07-20 Peng Fan New
[U-Boot,resend,1/3] mtd: nand: mxs support oobsize bigger than 512 0 1 0 2015-07-20 Peng Fan New
[U-Boot,5/5] arm: mvebu: db-88f6820-gp: Add SDIO/MMC SPL boot support 0 0 0 2015-07-20 Stefan Roese New
[U-Boot,4/5] spl: spl_mmc: Add option to boot from a MMC partition with offset 0 0 0 2015-07-20 Stefan Roese New
[U-Boot,3/5] kwbimage: Rename CONFIG_SYS_SPI_U_BOOT_OFFS to CONFIG_SYS_U_BOOT_OFFS 0 0 0 2015-07-20 Stefan Roese New
[U-Boot,2/5] kwbimage: Add support for SDIO/MMC boot device selection 0 0 0 2015-07-20 Stefan Roese New
[U-Boot,1/5] arm: mvebu: Add SPL SDIO/MMC boot support 0 0 0 2015-07-20 Stefan Roese New
[U-Boot,v2,11/11] arm: mvebu: db-88f6820: Add SPL support with DDR init code 0 0 0 2015-07-20 Stefan Roese New
[U-Boot,v2,10/11] arm: mvebu: a38x: Use correct PEX register access macros 0 0 0 2015-07-20 Stefan Roese New
[U-Boot,v2,09/11] arm: mvebu: Call timer_init early before PHY and DDR init 0 0 0 2015-07-20 Stefan Roese New
[U-Boot,v2,08/11] arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr 0 0 0 2015-07-20 Stefan Roese New
[U-Boot,v2,07/11] arm: mvebu: drivers/ddr: Move Armada XP DDR init code into new directory 0 0 0 2015-07-20 Stefan Roese New
[U-Boot,v2,06/11] arm: mvebu: Add Armada 38x SERDES / PHY init code from Marvell bin_hdr 0 0 0 2015-07-20 Stefan Roese New
[U-Boot,v2,05/11] arm: mvebu: serdes: Move Armada XP SERDES / PHY init code into new directory 0 0 0 2015-07-20 Stefan Roese New
[U-Boot,v2,04/11] Makefile: Fix mvebu build target to use SPL load and exe-address 0 0 0 2015-07-20 Stefan Roese New
[U-Boot,v2,03/11] arm: mvebu: Disable MMU before changing register base address 0 0 0 2015-07-20 Stefan Roese New
[U-Boot,v2,02/11] arm: mvebu: spl.c: Add call to board_early_init_f() 0 0 0 2015-07-20 Stefan Roese New
[U-Boot,v2,01/11] arm: mvebu: Use default reg base address for SPL on A38x 0 0 0 2015-07-20 Stefan Roese New
[U-Boot] Reproducible U-Boot build support, using SOURCE_DATE_EPOCH 0 0 0 2015-07-20 Paul Kocialkowski trini New
[U-Boot,3/3] stm32f429: use 180 MHz system clock 0 0 0 2015-07-19 Antonio Borneo trini Under Review
[U-Boot,2/3] stm32f4: add cpu clock option for 180 MHz 0 0 0 2015-07-19 Antonio Borneo trini Under Review
[U-Boot,1/3] stm32f429: pass the device unique ID in DTB 0 0 0 2015-07-19 Antonio Borneo trini Under Review
[U-Boot,V3,8/8] configs: keystone2: remove distro specific ramdisk name 0 1 0 2015-07-18 Nishanth Menon trini Superseded
[U-Boot,V3,7/8] configs: k2*_evm: rename skernel binary names to generated file names 0 2 0 2015-07-18 Nishanth Menon trini Superseded
[U-Boot,V3,6/8] ti_armv7_keystone2: switch to using kernel zImage 0 2 0 2015-07-18 Nishanth Menon trini Superseded
[U-Boot,V3,5/8] configs: ti_armv7_keystone2: switch addresses to generic addresses 0 2 0 2015-07-18 Nishanth Menon trini Superseded
[U-Boot,V3,4/8] configs: ti_armv7_keystone2: start using armv7_common 0 0 0 2015-07-18 Nishanth Menon trini Superseded
[U-Boot,V3,3/8] configs: rename ks2_evm into ti_armv7_keystone2 2 3 0 2015-07-18 Nishanth Menon trini Superseded
[U-Boot,V3,2/8] board: ks2_evm: get rid of bogus CONFIG_LINUX_BOOT_PARAM_ADDR 2 1 0 2015-07-18 Nishanth Menon trini Superseded
[U-Boot,V3,1/8] configs: split ti_armv7_common into a omap generic header 0 1 0 2015-07-18 Nishanth Menon trini Superseded
[U-Boot,6/6] x86: Convert to use driver model pci on queensbay/crownbay 1 0 1 2015-07-18 Bin Meng sjg Accepted
[U-Boot,5/6] dm: pci: Support bridge device configuration correctly 1 0 1 2015-07-18 Bin Meng sjg Accepted
[U-Boot,4/6] dm: pci: Pass only device/function to pci_bus_find_devfn() 1 0 1 2015-07-18 Bin Meng sjg Accepted
« Previous 1 2 ... 6 7 8 9 10 11 12 13 14 ... 439 440 Next »