Show patches with: none      |   178854 patches
« 1 2 ... 1321 1322 1323 … 1788 1789 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[U-Boot,v3,15/15] imx: mx6ul_14x14_evk add basic board support - - - - --- 2015-07-20 Peng Fan sbabic Awaiting Upstream
[U-Boot,v3,14/15] imx: imx6_spl add mx6ul support - - - - --- 2015-07-20 Peng Fan sbabic Awaiting Upstream
[U-Boot,v3,13/15] imx:mx6ul add dram spl configuration and header file - - - - --- 2015-07-20 Peng Fan sbabic Awaiting Upstream
[U-Boot,v3,12/15] mx6_common: Fix LOADADDR and SYS_TEXT_BASE for i.MX6UL - - - - --- 2015-07-20 Peng Fan sbabic Awaiting Upstream
[U-Boot,v3,11/15] mxc: gpio add i.MX6UL support - - - - --- 2015-07-20 Peng Fan sbabic Awaiting Upstream
[U-Boot,v3,10/15] imx: mx6 add PAD_CTL_SPEED_LOW for i.MX6SX/UL - - - - --- 2015-07-20 Peng Fan sbabic Awaiting Upstream
[U-Boot,v3,09/15] imx: mx6ul update soc related settings - - - - --- 2015-07-20 Peng Fan sbabic Awaiting Upstream
[U-Boot,v3,08/15] imx: mx6ul select SYS_L2CACHE_OFF - - - - --- 2015-07-20 Peng Fan sbabic Awaiting Upstream
[U-Boot,v3,07/15] imx:mx6ul add clock support - - - - --- 2015-07-20 Peng Fan sbabic Awaiting Upstream
[U-Boot,v3,06/15] imx: mx6ul remove errata for i.MX6UL - - - - --- 2015-07-20 Peng Fan sbabic Awaiting Upstream
[U-Boot,v3,05/15] imx-common: timer: add i.MX6UL support - - - - --- 2015-07-20 Peng Fan sbabic Awaiting Upstream
[U-Boot,v3,04/15] imx: mx6ul Add CONFIG_SYS_CACHELINE_SIZE for i.MX6UL - - - - --- 2015-07-20 Peng Fan sbabic Awaiting Upstream
[U-Boot,v3,03/15] imx: mx6ul: Update imx registers head file - - - - --- 2015-07-20 Peng Fan sbabic Awaiting Upstream
[U-Boot,v3,02/15] imx: mx6ul: Add pins IOMUX head file - - - - --- 2015-07-20 Peng Fan sbabic Awaiting Upstream
[U-Boot,v3,01/15] imx: mx6ul: Add i.MX6UL CPU type - - - - --- 2015-07-20 Peng Fan sbabic Awaiting Upstream
[U-Boot,v2] usb: CONFIG_USB_FASTBOOT prefix replacement for consistency - - - - --- 2015-07-20 Paul Kocialkowski bobenstein Accepted
[U-Boot,GIT] Pull request: u-boot-dfu - - - - --- 2015-07-20 Łukasz Majewski marex Accepted
[U-Boot,3/3] mtd: nand: mxs invalidate dcache before DMA read 1 - - - --- 2015-07-20 Peng Fan scottwood Superseded
[U-Boot,2/3] mtd: nand: mxs check maximum ecc that platfrom supports - - 1 - --- 2015-07-20 Peng Fan scottwood Superseded
[U-Boot,resend,1/3] mtd: nand: mxs support oobsize bigger than 512 - - 1 - --- 2015-07-20 Peng Fan scottwood Superseded
[U-Boot,5/5] arm: mvebu: db-88f6820-gp: Add SDIO/MMC SPL boot support - - - - --- 2015-07-20 Stefan Roese stroese Accepted
[U-Boot,4/5] spl: spl_mmc: Add option to boot from a MMC partition with offset - - - - --- 2015-07-20 Stefan Roese panto Accepted
[U-Boot,3/5] kwbimage: Rename CONFIG_SYS_SPI_U_BOOT_OFFS to CONFIG_SYS_U_BOOT_OFFS - - - - --- 2015-07-20 Stefan Roese stroese Accepted
[U-Boot,2/5] kwbimage: Add support for SDIO/MMC boot device selection - - - - --- 2015-07-20 Stefan Roese stroese Accepted
[U-Boot,1/5] arm: mvebu: Add SPL SDIO/MMC boot support - - - - --- 2015-07-20 Stefan Roese panto Accepted
[U-Boot,v2,11/11] arm: mvebu: db-88f6820: Add SPL support with DDR init code - - - - --- 2015-07-20 Stefan Roese stroese Accepted
[U-Boot,v2,10/11] arm: mvebu: a38x: Use correct PEX register access macros - - - - --- 2015-07-20 Stefan Roese stroese Accepted
[U-Boot,v2,09/11] arm: mvebu: Call timer_init early before PHY and DDR init - - - - --- 2015-07-20 Stefan Roese stroese Accepted
[U-Boot,v2,08/11] arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr - - - - --- 2015-07-20 Stefan Roese stroese Accepted
[U-Boot,v2,07/11] arm: mvebu: drivers/ddr: Move Armada XP DDR init code into new directory - - - - --- 2015-07-20 Stefan Roese stroese Accepted
[U-Boot,v2,06/11] arm: mvebu: Add Armada 38x SERDES / PHY init code from Marvell bin_hdr - - - - --- 2015-07-20 Stefan Roese stroese Accepted
[U-Boot,v2,05/11] arm: mvebu: serdes: Move Armada XP SERDES / PHY init code into new directory - - - - --- 2015-07-20 Stefan Roese stroese Accepted
[U-Boot,v2,04/11] Makefile: Fix mvebu build target to use SPL load and exe-address - - - - --- 2015-07-20 Stefan Roese stroese Accepted
[U-Boot,v2,03/11] arm: mvebu: Disable MMU before changing register base address - - - - --- 2015-07-20 Stefan Roese stroese Accepted
[U-Boot,v2,02/11] arm: mvebu: spl.c: Add call to board_early_init_f() - - - - --- 2015-07-20 Stefan Roese stroese Accepted
[U-Boot,v2,01/11] arm: mvebu: Use default reg base address for SPL on A38x - - - - --- 2015-07-20 Stefan Roese stroese Accepted
[U-Boot] Reproducible U-Boot build support, using SOURCE_DATE_EPOCH - - - - --- 2015-07-20 Paul Kocialkowski trini Changes Requested
[U-Boot,3/3] stm32f429: use 180 MHz system clock - - - - --- 2015-07-19 Antonio Borneo trini Accepted
[U-Boot,2/3] stm32f4: add cpu clock option for 180 MHz - - - - --- 2015-07-19 Antonio Borneo trini Accepted
[U-Boot,1/3] stm32f429: pass the device unique ID in DTB - - - - --- 2015-07-19 Antonio Borneo trini Accepted
[U-Boot,V3,8/8] configs: keystone2: remove distro specific ramdisk name - - 1 - --- 2015-07-18 Nishanth Menon trini Superseded
[U-Boot,V3,7/8] configs: k2*_evm: rename skernel binary names to generated file names - - 2 - --- 2015-07-18 Nishanth Menon trini Superseded
[U-Boot,V3,6/8] ti_armv7_keystone2: switch to using kernel zImage - - 2 - --- 2015-07-18 Nishanth Menon trini Superseded
[U-Boot,V3,5/8] configs: ti_armv7_keystone2: switch addresses to generic addresses - - 2 - --- 2015-07-18 Nishanth Menon trini Superseded
[U-Boot,V3,4/8] configs: ti_armv7_keystone2: start using armv7_common - - - - --- 2015-07-18 Nishanth Menon trini Superseded
[U-Boot,V3,3/8] configs: rename ks2_evm into ti_armv7_keystone2 2 - 3 - --- 2015-07-18 Nishanth Menon trini Superseded
[U-Boot,V3,2/8] board: ks2_evm: get rid of bogus CONFIG_LINUX_BOOT_PARAM_ADDR 2 - 1 - --- 2015-07-18 Nishanth Menon trini Superseded
[U-Boot,V3,1/8] configs: split ti_armv7_common into a omap generic header - - 1 - --- 2015-07-18 Nishanth Menon trini Superseded
[U-Boot,6/6] x86: Convert to use driver model pci on queensbay/crownbay 1 - - 1 --- 2015-07-18 Bin Meng sjg Accepted
[U-Boot,5/6] dm: pci: Support bridge device configuration correctly 1 - - 1 --- 2015-07-18 Bin Meng sjg Accepted
[U-Boot,4/6] dm: pci: Pass only device/function to pci_bus_find_devfn() 1 - - 1 --- 2015-07-18 Bin Meng sjg Accepted
[U-Boot,3/6] dm: pci: Use complete bdf in all pci config read/write routines 1 - - 1 --- 2015-07-18 Bin Meng sjg Accepted
[U-Boot,2/6] dm: pci: Correct primary/secondary/subordinate bus number assignment 1 - - 1 --- 2015-07-18 Bin Meng sjg Accepted
[U-Boot,1/6] Fix incorrect comments in linker_lists.h 1 - - - --- 2015-07-18 Bin Meng sjg Accepted
[U-Boot,RFC,v2] patman: add distutils based installer - - - 1 --- 2015-07-18 Chris Packham sjg Superseded
[U-Boot,v4,2/4] nand: lpc32xx: add SLC NAND controller support 1 - - 1 --- 2015-07-18 Vladimir Zapolskiy trini Accepted
[U-Boot,v3,2/4] nand: lpc32xx: add SLC NAND controller support - - - - --- 2015-07-17 Vladimir Zapolskiy Superseded
[U-Boot,v2,4/4] lpc32xx: devkit3250: add spl build support - - - - --- 2015-07-17 Vladimir Zapolskiy trini Accepted
[U-Boot,v2,3/4] lpc32xx: devkit3250: update of board configuration - - - - --- 2015-07-17 Vladimir Zapolskiy trini Accepted
[U-Boot,v2,2/4] nand: lpc32xx: add SLC NAND controller support - - - - --- 2015-07-17 Vladimir Zapolskiy Superseded
[U-Boot,v2,1/4] spl: nand: simple: replace readb() with chip specific read_buf() 1 - - - --- 2015-07-17 Vladimir Zapolskiy trini Accepted
[U-Boot,v5,5/5] tricorder: switch to CONFIG_SYS_THUMB_BUILD - - - - --- 2015-07-17 Albert ARIBAUD aaribaud Superseded
[U-Boot,v5,4/5] openrd: switch to CONFIG_SYS_THUMB_BUILD - - - - --- 2015-07-17 Albert ARIBAUD aaribaud Superseded
[U-Boot,v5,3/5] kirkwood: support CONFIG_SYS_THUMB_BUILD - - - - --- 2015-07-17 Albert ARIBAUD aaribaud Superseded
[U-Boot,v5,2/5] arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD - - - - --- 2015-07-17 Albert ARIBAUD aaribaud Superseded
[U-Boot,v5,1/5] stm32f429-discovery: add CONFIG_SYS_THUMB_BUILD - - - - --- 2015-07-17 Albert ARIBAUD aaribaud Superseded
[U-Boot,3/3] usb: lpc32xx: add host USB driver - - - - --- 2015-07-17 Sylvain Lemieux Superseded
[U-Boot,2/3] dma: lpc32xx: add DMA driver - - - - --- 2015-07-17 Sylvain Lemieux Superseded
[U-Boot,1/3] nand: lpc32xx: add SLC NAND driver - - - - --- 2015-07-17 Sylvain Lemieux Superseded
[U-Boot] image: fix Android ramdisk support when dtb is specified - - - - --- 2015-07-17 Rob Herring (Arm) trini Accepted
[U-Boot] dm: Make regmap and syscon optional - - - - --- 2015-07-17 Simon Glass sjg Accepted
[U-Boot,v2,4/4] ARM: dts: UniPhier: add GPIO controller nodes 1 - - - --- 2015-07-17 Masahiro Yamada sjg Deferred
[U-Boot,v2,3/4] ARM: UniPhier: enable UniPhier GPIO driver 1 - - - --- 2015-07-17 Masahiro Yamada sjg Deferred
[U-Boot,v2,2/4] gpio: do not include <asm/arch/gpio.h> for UniPhier 1 - - - --- 2015-07-17 Masahiro Yamada sjg Deferred
[U-Boot,v2,1/4] gpio: UniPhier: add driver for UniPhier GPIO controller 1 - - - --- 2015-07-17 Masahiro Yamada sjg Deferred
[U-Boot,RFC] am33xx: add 600us wait in DDR3 initialization sequence - - 1 - --- 2015-07-17 Samuel Egli trini Superseded
[U-Boot,v2] Kill unneeded #include <linux/kconfig.h> 2 - - - --- 2015-07-17 Masahiro Yamada trini Superseded
[U-Boot] zynq: enable CONFIG_NET_RANDOM_ETHADDR 1 - - - --- 2015-07-17 Masahiro Yamada monstr Accepted
[U-Boot] Kill unneeded #include <linux/kconfig.h> 1 - - - --- 2015-07-17 Masahiro Yamada Superseded
[U-Boot] buildman: Correct '--fetch-arch' command documentation 1 - - - --- 2015-07-17 Bin Meng sjg Accepted
[U-Boot,V2,4/4] configs: ti_armv7_keystone2: start using armv7_common - - - - --- 2015-07-16 Nishanth Menon trini Superseded
[U-Boot,V2,3/4] configs: rename ks2_evm into ti_armv7_keystone2 2 - - - --- 2015-07-16 Nishanth Menon trini Superseded
[U-Boot,V2,2/4] board: ks2_evm: get rid of bogus CONFIG_LINUX_BOOT_PARAM_ADDR 2 - - - --- 2015-07-16 Nishanth Menon trini Superseded
[U-Boot,V2,1/4] configs: split ti_armv7_common into a omap generic header - - - - --- 2015-07-16 Nishanth Menon trini Superseded
[U-Boot,3/3] configs: ti_armv7_keystone2: start using armv7_common - - - - --- 2015-07-16 Nishanth Menon trini Superseded
[U-Boot,2/3] configs: rename ks2_evm into ti_armv7_keystone2 - - - - --- 2015-07-16 Nishanth Menon trini Superseded
[U-Boot,1/3] configs: split ti_armv7_common into a omap generic header - - - - --- 2015-07-16 Nishanth Menon trini Superseded
[U-Boot] board: ks2: README: fix typos - - 2 - --- 2015-07-16 Nishanth Menon trini Accepted
[U-Boot] am33xx: Unused get_board_rev function removal - - 1 - --- 2015-07-16 Paul Kocialkowski trini Accepted
[U-Boot,2/2] am33xx: CONFIG_REVISION_TAG ifdef check for get_board_rev - - - - --- 2015-07-16 Paul Kocialkowski trini Changes Requested
[U-Boot,1/2] omap3: CONFIG_REVISION_TAG ifdef check for get_board_rev - - 1 - --- 2015-07-16 Paul Kocialkowski trini Accepted
[U-Boot,4/4] sunxi: nand: Add information to sunxi that it was run from NAND in SPL - - - - --- 2015-07-16 Piotr Zierhoffer jwrdegoede Superseded
[U-Boot,3/4] sunxi: nand: Add a20_nandread command to load image from NAND in SPL - - - - --- 2015-07-16 Piotr Zierhoffer jwrdegoede Superseded
[U-Boot,2/4] sunxi: nand: Add board configuration options - - - - --- 2015-07-16 Piotr Zierhoffer jwrdegoede Superseded
[U-Boot,1/4] sunxi: nand: Add basic sunxi NAND driver with DMA support - - - - --- 2015-07-16 Piotr Zierhoffer jwrdegoede Superseded
[U-Boot] powerpc/t4080: update t4160/t4080 serdes - - - - --- 2015-07-16 Shengzhou Liu Superseded
[U-Boot,v2,6/6] spi: cadence_qspi: get fifo width from device tree - - - - --- 2015-07-16 Vikas MANOCHA jagan Superseded
[U-Boot,v2,5/6] spi: cadence_qspi: fix base trigger address & transfer start address - - - - --- 2015-07-16 Vikas MANOCHA jagan Superseded
[U-Boot,v2,4/6] spi: cadence_qspi: fix indirect read/write start address - - - - --- 2015-07-16 Vikas MANOCHA jagan Superseded
[U-Boot,v2,3/6] spi: cadence_qspi: remove sram polling from flash write - - - - --- 2015-07-16 Vikas MANOCHA jagan Superseded
« 1 2 ... 1321 1322 1323 … 1788 1789 »