Show patches with: State = Action Required       |    Archived = No       |   1048 patches
« 1 2 3 410 11 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
ARC: Don't mess with endianess settings ARC: Don't mess with endianess settings - - - - --- 2020-01-20 Alexey Brodkin abrodkin New
ARM: at91: armv7: sama7g5 uses CCF clock driver ARM: at91: armv7: sama7g5 uses CCF clock driver - - 1 - --- 2020-11-11 Eugen Hristev ehristev New
ARM: dts: at91: sam9x60: enable slewrate/high drive for sdhci0 pinout ARM: dts: at91: sam9x60: enable slewrate/high drive for sdhci0 pinout - - - - --- 2020-11-09 Eugen Hristev ehristev New
ARM: dts: rmobile: Enable eMMC DDR52 modes on Gen3 Salvator-X(S), ULCB, Ebisu ARM: dts: rmobile: Enable eMMC DDR52 modes on Gen3 Salvator-X(S), ULCB, Ebisu - - - - --- 2020-03-08 Marek Vasut marex New
ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.6.2 ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.6.2 - - - - --- 2020-04-04 Marek Vasut marex New
ARM: dts: stm32: Add DHCOM based PicoITX board ARM: dts: stm32: Add DHCOM based PicoITX board - - 1 - --- 2020-11-03 Marek Vasut pchotard New
ARM: dts: stm32: Consistently enable internal pull-ups for SD bus ARM: dts: stm32: Consistently enable internal pull-ups for SD bus - - - - --- 2020-10-09 Marek Vasut pchotard Needs Review / ACK
ARM: dts: stm32: Drop QSPI CS2 on DHCOM ARM: dts: stm32: Drop QSPI CS2 on DHCOM - - 2 - --- 2020-10-28 Marek Vasut pchotard New
ARM: dts: stm32: Fix uSD card-detect GPIO on DHCOM ARM: dts: stm32: Fix uSD card-detect GPIO on DHCOM - - 2 - --- 2020-10-28 Marek Vasut pchotard New
ARM: dts: stm32: Reinstate card detect behavior on DHSOM ARM: dts: stm32: Reinstate card detect behavior on DHSOM - - 1 - --- 2020-10-19 Marek Vasut pchotard New
ARM: dts: xilinx: Fix I2C and SPI bus warnings ARM: dts: xilinx: Fix I2C and SPI bus warnings - - - - --- 2019-12-16 Florian Klink monstr New
ARM: imx: soc: Add reset for non-DM case ARM: imx: soc: Add reset for non-DM case - - - - --- 2020-08-05 Marek Vasut sbabic New
ARM: mach-at91: fix timer.o compile condition ARM: mach-at91: fix timer.o compile condition - - - - --- 2020-11-11 Eugen Hristev ehristev New
ARM: mx6: add support for USB armory Mk II board ARM: mx6: add support for USB armory Mk II board - - - - --- 2020-10-21 andrej.rosano@f-secure.com sbabic New
ARM: rmobile: List all renesas defconfig in MAINTAINERS file ARM: rmobile: List all renesas defconfig in MAINTAINERS file - - - - --- 2020-04-28 Marek Vasut marex New
ARM: rmobile: Unify Gen3 Salvator-X(S) and ULCB defconfigs ARM: rmobile: Unify Gen3 Salvator-X(S) and ULCB defconfigs - - - - --- 2020-04-05 Marek Vasut marex New
ARM: rmobile: Update Gen3 defconfig names in MAINTAINERS files ARM: rmobile: Update Gen3 defconfig names in MAINTAINERS files - - - - --- 2020-04-28 Marek Vasut marex New
ARM: socfpga: Add initial support for the ABB SECU board ARM: socfpga: Add initial support for the ABB SECU board - - - - --- 2020-02-17 Marek Vasut marex New
ARM: zynq: Rename defconfig to be align with ZynqMP and Versal ARM: zynq: Rename defconfig to be align with ZynqMP and Versal - - - - --- 2020-02-17 Michal Simek monstr New
Add support for Davicom DM96xx based USB 10/100 ethernet devices Add support for Davicom DM96xx based USB 10/100 ethernet devices - - - - --- 2020-09-12 hyyoxhk marex New
Convert CONFIG_WATCHDOG et al to Kconfig Convert CONFIG_WATCHDOG et al to Kconfig - - - - --- 2020-09-23 Tom Rini trini New
Fix a squashfs crash when reading large directories Fix a squashfs crash when reading large directories - - - - --- 2020-11-22 Campbell Suter trini Needs Review / ACK
Fix squashfs failing to load sparse files Fix squashfs failing to load sparse files - - - - --- 2020-11-23 Campbell Suter trini Needs Review / ACK
Kconfig/debug_uart: Enable proper drivers for debug on Zynq Kconfig/debug_uart: Enable proper drivers for debug on Zynq - - - - --- 2020-01-23 Olliver Schinagl monstr New
Kconfig/ehci/zynq: Add ULPI dependency Kconfig/ehci/zynq: Add ULPI dependency - - - - --- 2020-01-23 Olliver Schinagl monstr New
Kconfig/fpga_zynq: Depend on FPGA Kconfig/fpga_zynq: Depend on FPGA - - - - --- 2020-01-23 Olliver Schinagl monstr New
Kconfig/fpgad: Add dependencies Kconfig/fpgad: Add dependencies - - - - --- 2020-01-23 Olliver Schinagl monstr New
Kconfig/zynq: Set default SPL_STACK_R_ADDR Kconfig/zynq: Set default SPL_STACK_R_ADDR - - - - --- 2020-01-23 Olliver Schinagl monstr New
Kconfig: simple panel requires backlight Kconfig: simple panel requires backlight - - - - --- 2020-11-05 Marcin Juszkiewicz trini New
MIPS: introduce `REL_LA' to get label runtime address MIPS: introduce `REL_LA' to get label runtime address - - - - --- 2020-11-14 Du Huanpeng danielschwierzeck New
Makefile: Correctly propagate failure when removing target Makefile: Correctly propagate failure when removing target - - 1 - --- 2020-10-26 Pali Rohár trini New
Makefile: Do not call useless command 'true' Makefile: Do not call useless command 'true' - - - - --- 2020-11-04 Pali Rohár trini New
Nokia RX-51: Convert to CONFIG_DM_MMC Nokia RX-51: Convert to CONFIG_DM_MMC - - - - --- 2020-11-21 Pali Rohár lokeshvutla New
Nokia RX-51: Decrease i2c speed to 100000 Nokia RX-51: Decrease i2c speed to 100000 - 1 - - --- 2020-11-21 Pali Rohár lokeshvutla New
Output information about device look up failure. Output information about device look up failure. - - - - --- 2020-01-21 Nikita Ermakov trini New
Raspberry pi CM3+ with u-boot Raspberry pi CM3+ with u-boot - - - - --- 2020-11-17 Romain Crausaz matthias_bgg New
Revert "ARM: socfpga: Remove socfpga_sdram_apply_static_cfg() Revert "ARM: socfpga: Remove socfpga_sdram_apply_static_cfg() - - - - --- 2020-08-06 Wolfgang Grandegger simongoldschmidt Needs Review / ACK
Revert "i2c: rcar_i2c: Set the slave address from rcar_i2c_xfer" Revert "i2c: rcar_i2c: Set the slave address from rcar_i2c_xfer" - - 1 - --- 2020-09-21 Lad Prabhakar marex New
SPL: stm32mp1: fix spl_mmc_boot_partition not defined SPL: stm32mp1: fix spl_mmc_boot_partition not defined - - 1 - --- 2020-10-12 Richard Genoud patrick_delaunay New
Speed/mode setting via "sf probe" command Speed/mode setting via "sf probe" command - - - - --- 2020-10-15 Ralph Siemsen jagan New
Zybo Z7 board - fix SPL uart init bitrate Zybo Z7 board - fix SPL uart init bitrate - - - 1 --- 2020-01-09 Milan Obuch monstr New
[01/10] test: Add some tests for setexpr setexpr: Correct various bugs and add tests plus string support - - - - --- 2020-11-01 Simon Glass trini New
[01/13] usb: ehci-mx6: Add powerup_fixup implementation ehci-mx6: update and fix - - - - --- 2020-09-16 Peng Fan marex New
[01/15] gpio: mpc8xxx_gpio: fix a bug on ls1046ardb [01/15] gpio: mpc8xxx_gpio: fix a bug on ls1046ardb - - - - --- 2020-10-16 Biwen Li priyankajain New
[01/16] usb: gadget: Add ep_config call back to usb_gadget_ops usb: gadget: update - - - - --- 2020-09-16 Peng Fan lukma New
[02/10] command: Add constants for cmd_get_data_size string / error setexpr: Correct various bugs and add tests plus string support - - - - --- 2020-11-01 Simon Glass trini New
[02/13] usb: ehci-mx6: preparing for ARM64 build ehci-mx6: update and fix - - - - --- 2020-09-16 Peng Fan marex New
[02/15] arm: dts: ls1021a: add gpio node [01/15] gpio: mpc8xxx_gpio: fix a bug on ls1046ardb - - - - --- 2020-10-16 Biwen Li priyankajain New
[02/16] usb: gadget: don't change ep name for dwc3 while ep autoconfig usb: gadget: update - - - - --- 2020-09-16 Peng Fan lukma New
[03/10] setexpr: Add explicit support for 32- and 64-bit ints setexpr: Correct various bugs and add tests plus string support - - - - --- 2020-11-01 Simon Glass trini New
[03/13] usb: ehci-mx6: Add i.MX8 OTG controller support ehci-mx6: update and fix - - - - --- 2020-09-16 Peng Fan marex New
[03/15] arm64: dts: ls1012a: add gpio node [01/15] gpio: mpc8xxx_gpio: fix a bug on ls1046ardb - - - - --- 2020-10-16 Biwen Li priyankajain New
[03/16] usb: gadget: OS String support usb: gadget: update - - - - --- 2020-09-16 Peng Fan lukma New
[04/10] test: Add some setexpr regex tests setexpr: Correct various bugs and add tests plus string support - - - - --- 2020-11-01 Simon Glass trini New
[04/13] usb: ehci-mx6: Turn on the power domain of USB PHY ehci-mx6: update and fix - - 1 - --- 2020-09-16 Peng Fan marex New
[04/15] arm64: dts: ls1028a: add gpio node [01/15] gpio: mpc8xxx_gpio: fix a bug on ls1046ardb - - - - --- 2020-10-16 Biwen Li priyankajain New
[04/16] arm: Remove mx51evk board spi: dm-conversion (part3) - - - - --- 2020-06-13 Jagan Teki jagan New
[04/16] usb: gadget: move utf8_to_utf16le to header file usb: gadget: update - - - - --- 2020-09-16 Peng Fan lukma New
[05/10] setexpr: Split the core logic into its own function setexpr: Correct various bugs and add tests plus string support - - - - --- 2020-11-01 Simon Glass trini New
[05/13] usb: ehci-mx6: Update driver to support i.MX8MM ehci-mx6: update and fix - - - - --- 2020-09-16 Peng Fan marex New
[05/15] arm64: dts: ls1043a: add gpio node [01/15] gpio: mpc8xxx_gpio: fix a bug on ls1046ardb - - - - --- 2020-10-16 Biwen Li priyankajain New
[05/16] arm: Remove ts4800 board spi: dm-conversion (part3) - - - - --- 2020-06-13 Jagan Teki jagan New
[05/16] usb: gadget: OS Feature Descriptors support usb: gadget: update - - - - --- 2020-09-16 Peng Fan lukma New
[06/10] setexpr: Add some tests for buffer overflow and backref setexpr: Correct various bugs and add tests plus string support - - - - --- 2020-11-01 Simon Glass trini New
[06/13] usb: ehci-mx6: fix controller index for imx8m and imx8 ehci-mx6: update and fix - - - - --- 2020-09-16 Peng Fan marex New
[06/15] arm64: dts: ls1046a: add gpio node [01/15] gpio: mpc8xxx_gpio: fix a bug on ls1046ardb - - - - --- 2020-10-16 Biwen Li priyankajain New
[06/16] arm: Remove tqma6s_wru4_mmc_defconfig spi: dm-conversion (part3) - - - - --- 2020-06-13 Jagan Teki jagan New
[06/16] usb: gadget: add WCID support for mfgtool usb: gadget: update - - - - --- 2020-09-16 Peng Fan lukma New
[07/10] setexpr: Correct dropping of final unmatched string setexpr: Correct various bugs and add tests plus string support - 1 - - --- 2020-11-01 Simon Glass trini New
[07/13] usb: ehci-mx6: Enable iMX EHCI driver for iMX8M Nano ehci-mx6: update and fix - - - - --- 2020-09-16 Peng Fan marex New
[07/15] arm64: dts: ls1088a: add gpio node [01/15] gpio: mpc8xxx_gpio: fix a bug on ls1046ardb - - - - --- 2020-10-16 Biwen Li priyankajain New
[07/16] arm: Remove pfla02 board spi: dm-conversion (part3) - - - - --- 2020-06-13 Jagan Teki jagan New
[07/16] usb: gadget: fastboot: add ext properties for WCID usb: gadget: update - - - - --- 2020-09-16 Peng Fan lukma New
[08/10] setexpr: Correct buffer overflow bug and enable tests setexpr: Correct various bugs and add tests plus string support - 1 - - --- 2020-11-01 Simon Glass trini New
[08/13] usb: ehci-mx6: configure usb out of suspend state ehci-mx6: update and fix - - 1 - --- 2020-09-16 Peng Fan marex New
[08/15] arm64: dts: ls208xa: add gpio node [01/15] gpio: mpc8xxx_gpio: fix a bug on ls1046ardb - - - - --- 2020-10-16 Biwen Li priyankajain New
[08/16] arm: Remove pcm058 board spi: dm-conversion (part3) - - - - --- 2020-06-13 Jagan Teki jagan New
[08/16] usb: gadget: set correct usb_configuration for os_desc_config usb: gadget: update - - 1 - --- 2020-09-16 Peng Fan lukma New
[09/10] setexpr: Convert to use a struct for values setexpr: Correct various bugs and add tests plus string support - - - - --- 2020-11-01 Simon Glass trini New
[09/13] usb: ehci-mx6: Fix USB QTD data buffer error ehci-mx6: update and fix - - 1 - --- 2020-09-16 Peng Fan marex New
[09/15] configs: ls1012a: enable CONFIG_MPC8XXX_GPIO [01/15] gpio: mpc8xxx_gpio: fix a bug on ls1046ardb - - - - --- 2020-10-16 Biwen Li priyankajain New
[09/16] arm: Remove riotboard board spi: dm-conversion (part3) - - - - --- 2020-06-13 Jagan Teki jagan New
[09/16] usb: gadget: update os_desc_config when add config usb: gadget: update - - - - --- 2020-09-16 Peng Fan lukma New
[1/1] Create codeql-analysis.yml [1/1] Create codeql-analysis.yml - - - - --- 2020-10-06 Heinrich Schuchardt trini New
[1/1] Dockerfile: compile QEMU for Nokia N900 emulation [1/1] Dockerfile: compile QEMU for Nokia N900 emulation - - - - --- 2020-07-13 Heinrich Schuchardt trini New
[1/1] board: freescale: vid.c: Add check for return value of adjust_vdd() [1/1] board: freescale: vid.c: Add check for return value of adjust_vdd() - - - - --- 2020-11-02 Priyanka Singh priyankajain New
[1/1] board: freescale: vid.c: Initialize variable 'i2caddress' [1/1] board: freescale: vid.c: Initialize variable 'i2caddress' - - - - --- 2020-10-27 Priyanka Singh priyankajain New
[1/1] cmd: CMD_CPU depends on CPU [1/1] cmd: CMD_CPU depends on CPU - - 1 - --- 2020-11-04 Heinrich Schuchardt trini New
[1/1] dm: pinctrl: include linux/errno.h in pinctrl.h [1/1] dm: pinctrl: include linux/errno.h in pinctrl.h - - 1 - --- 2020-02-17 Sébastien Szymanski trini New
[1/1] drivers: net: add Broadcom bnxt driver for supported platforms [1/1] drivers: net: add Broadcom bnxt driver for supported platforms - - - - --- 2019-12-05 Vladimir Olovyannikov jhersh New
[1/1] efi_loader: enable EFI_SET_TIME on sandbox and QEMU ARM [1/1] efi_loader: enable EFI_SET_TIME on sandbox and QEMU ARM - - - - --- 2020-11-21 Heinrich Schuchardt xypron New
[1/1] efi_loader: parameter check in GetNextVariableName() [1/1] efi_loader: parameter check in GetNextVariableName() - - - - --- 2020-11-19 Heinrich Schuchardt xypron New
[1/1] efi_loader: separate device-tree handling [1/1] efi_loader: separate device-tree handling - - - - --- 2020-10-06 Heinrich Schuchardt xypron New
[1/1] fs: fat: avoid NULL dereference when root dir is full [1/1] fs: fat: avoid NULL dereference when root dir is full - 1 1 - --- 2020-11-19 Heinrich Schuchardt trini New
[1/1] layerscape: fdt.c: Check for NULL return value from fdt_getprop() [1/1] layerscape: fdt.c: Check for NULL return value from fdt_getprop() - - - - --- 2020-11-02 Priyanka Singh priyankajain New
[1/1] ls1088ardb :Set CONFIG_SYS_BOARD to ls1088ardb [1/1] ls1088ardb :Set CONFIG_SYS_BOARD to ls1088ardb - - - - --- 2020-07-18 Jaiprakash Singh priyankajain New
[1/1] net: sntp: remove CONFIG_TIMESTAMP constraint [1/1] net: sntp: remove CONFIG_TIMESTAMP constraint - - - - --- 2020-10-23 Heinrich Schuchardt trini New
[1/1] test: test/lib/test_print.c depends on CONSOLE_RECORD [1/1] test: test/lib/test_print.c depends on CONSOLE_RECORD - - 1 - --- 2020-11-05 Heinrich Schuchardt trini New
[1/2] Makefile: Add environment variable DEVICE_TREE to header ARM: zynq: Start to use unified configurations - - 2 - --- 2020-02-18 Michal Simek monstr New
[1/2] arm64: zynqmp: Add missing Kconfig options to zynqmp_virt platform arm64: zynqmp: Cleanup defconfigs - - - - --- 2019-12-09 Michal Simek monstr New
« 1 2 3 410 11 »