| [U-Boot,2/4,V5] EXYNOS5: FDT: Add serial device node values |
2013-05-17 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,V8,5/9] EXYNOS5: DWMMC: Initialise the local variable to avoid unwanted results. |
2013-04-03 |
Amar |
prom |
New |
| [U-Boot,V8,1/9] FDT: Add compatible string for DWMMC |
2013-04-03 |
Amar |
prom |
New |
| [U-Boot,4/4,V5] CONFIG: EXYNOS5: Enable silent console |
2013-05-17 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,3/4,V5] S5P: Serial: Add fdt support to driver |
2013-05-17 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,1/4,v2] PMIC: max77686: add pmic_set_voltage api for max77686 |
2013-05-13 |
Akshay Saraswat |
prom |
New |
| [U-Boot,v3,1/4] Exynos5: Add clock support for SATA |
2012-12-12 |
Vasanth Ananthan |
prom |
New |
| [U-Boot,1/3,V5] EXYNOS5: Add gpio pin numbering feature |
2013-04-03 |
Rajeshwari Shinde |
prom |
Under Review |
| [U-Boot,3/4,v2] smdk5250: enable support for tmu throttling |
2013-05-13 |
Akshay Saraswat |
prom |
New |
| [U-Boot,4/4,v2] Exynos5: config: enable cpu freq |
2013-05-13 |
Akshay Saraswat |
prom |
New |
| [U-Boot,V8,3/9] DWMMC: Initialise dwmci and resolve EMMC read write issues |
2013-04-03 |
Amar |
prom |
New |
| [U-Boot] video: exynos: remove unused variable of exynos_mipi_dsi_wr_data() |
2013-05-08 |
Donghwa Lee |
prom |
New |
| [U-Boot,2/2] EXYNOS: SPI: Support SPI_PREAMBLE mode |
2013-05-03 |
Vadim Bendebury |
prom |
New |
| [U-Boot,v5,01/11] Add configuration option to select printf() inclusion on SPL |
2012-09-21 |
José Miguel Gonçalves |
prom |
New |
| [U-Boot,2/5] EXYNOS: Add Exynos4 I2C spacing |
2012-09-24 |
Piotr Wilczek |
prom |
Under Review |
| [U-Boot,v6] Exynos5: Pinmux: Add fdt for pinmux |
2013-03-11 |
Akshay Saraswat |
prom |
Under Review |
| [U-Boot,5/5] DRIVERS: MISC: PMIC: Modify pmic driver to support multibus I2C |
2012-09-24 |
Piotr Wilczek |
prom |
Under Review |
| [U-Boot] exynos: uart: Use generic api to the uart clk freq |
2013-03-25 |
Akshay Saraswat |
prom |
New |
| [U-Boot] exynos: i2c: Use generic api to get i2c clk freq |
2013-03-25 |
Akshay Saraswat |
prom |
New |
| [U-Boot,V9,5/9] EXYNOS5: DWMMC: Initialise the local variable to avoid unwanted results. |
2013-04-27 |
Amar |
prom |
New |
| [U-Boot,V9,3/9] DWMMC: Initialise dwmci and resolve EMMC read write issues |
2013-04-27 |
Amar |
prom |
New |
| [U-Boot] EXYNOS: SPI: Support word transfers |
2013-03-25 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,v3,2/2] EXYNOS4: Add ORIGEN_QUAD board support |
2012-12-20 |
Jeong-Hyeon Kim |
prom |
Under Review |
| [U-Boot,4/4] EXYNOS: Move files from board/samsung to arch/arm. |
2013-04-25 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,3/4] EXYNOS4210: Configure GPIO for uart |
2013-04-25 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,2/4,v2] Exynos5: cpufreq: Implement frequency scaling for exynos5 |
2013-05-13 |
Akshay Saraswat |
prom |
New |
| [U-Boot,1/2,V2] EXYNOS: Export timer_get_us() to get microsecond timer |
2013-05-17 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot] I2C: Exynos5: Reduce the Delay in s3c24x0 i2c driver |
2013-03-25 |
Akshay Saraswat |
prom |
New |
| [U-Boot,V9,9/9] COMMON: MMC: Command to support EMMC booting and to resize EMMC boot partition |
2013-04-27 |
Amar |
prom |
New |
| [U-Boot,v2,2/9] drivers:power:max77693: add support for new multi function pmic max77693 |
2013-04-04 |
Piotr Wilczek |
prom |
New |
| [U-Boot,4/5] DRIVERS: I2C: Modify I2C driver for EXYNOS4 |
2012-09-24 |
Piotr Wilczek |
prom |
Under Review |
| [U-Boot] AT91: Defer Dataflash access to env_relocate_spec |
2011-08-03 |
Xu, Hong |
reinhardm |
Under Review |
| [U-Boot] at91rm9200ek.h: explicitly disable D-Cache |
2011-08-31 |
Andreas Bießmann |
reinhardm |
Under Review |
| [U-Boot] AT91: fix at91cap9 SoC files |
2011-08-03 |
Reinhard Meyer |
reinhardm |
Under Review |
| [U-Boot,v6] Add support for Congatec Conga-QEVAl board |
2013-05-16 |
SARTRE Leo |
sbabic |
New |
| [U-Boot,v2] spi: mxc_spi: Set master mode for all channels |
2013-05-01 |
Dirk Behme |
sbabic |
New |
| [U-Boot,v2,1/2] imx: Complete the pin definitions for the i.MX6DL / i.MX6Solo |
2013-04-22 |
Pierre Aubert |
sbabic |
Under Review |
| [U-Boot,2/2] mx6qsabreauto: Add Port Expander reset |
2013-05-14 |
Renato Frias |
sbabic |
Under Review |
| [U-Boot,1/2] mx6qsabreauto: Add i2c to mx6qsabreauto board |
2013-05-14 |
Renato Frias |
sbabic |
Under Review |
| [U-Boot,v2,2/2] imx: Add support for the SabreSD shipped with i.MX6DL |
2013-04-22 |
Pierre Aubert |
sbabic |
Under Review |
| [U-Boot,4/6] README: mxs: Introduce README.mxs |
2013-05-03 |
Fabio Estevam |
sbabic |
New |
| [U-Boot] mx23: Add a README file |
2013-05-03 |
Fabio Estevam |
sbabic |
New |
| [U-Boot] arm: mxs: Fix vectoring table crafting |
2013-04-26 |
Marek Vasut |
sbabic |
New |
| [U-Boot] mx6: Fix the reading of CPU revision |
2013-03-26 |
Fabio Estevam |
sbabic |
New |
| [U-Boot] i.MX6: consolidate pad names for multi-CPU boards |
2013-02-14 |
Eric Nelson |
sbabic |
New |
| [U-Boot,2/9] NET: fec_mxc.c: Add support for MII for MX5 SOCs |
2012-02-22 |
Stefano Babic |
sbabic |
New |
| [U-Boot,2/2] spi: mxc_spi: Update pre and post divider algorithm |
2013-05-09 |
Dirk Behme |
sbabic |
New |
| [U-Boot,v2,1/2] spi: mxc_spi: Fix pre and post divider calculation |
2013-05-09 |
Dirk Behme |
sbabic |
New |
| [U-Boot,3/6] README: mx28_common: Fix structure of sentence |
2013-05-03 |
Fabio Estevam |
sbabic |
New |
| [U-Boot,2/6] README: mx28_common: Do not hardcode the SSP port |
2013-05-03 |
Fabio Estevam |
sbabic |
New |
| [U-Boot,1/6] README: mx28_common: Keep the text within 80 columns |
2013-05-03 |
Fabio Estevam |
sbabic |
New |
| [U-Boot] spi: mxc_spi: Fix pre and post divider calculation |
2013-05-02 |
Dirk Behme |
sbabic |
New |
| [U-Boot,2/2] Add instruction file (based on the README for the sabrelite) for booting the Congatec board from SD-Card. |
2013-05-13 |
SARTRE Leo |
sbabic |
New |
| [U-Boot] FEC: Rework RX buffer init |
2012-10-09 |
Marek Vasut |
sbabic |
New |
| [U-Boot,V4,3/8] imx: fec: Resolve speed before configuring gasket |
2012-04-19 |
Timo Ketola |
sbabic |
New |
| [U-Boot,v3,07/11] mtd: nand: add Faraday FTNANDC021 NAND controller support |
2013-04-26 |
Kuo-Jung Su |
scottwood |
New |
| [U-Boot] nand/fsl_elbc: detect page size at runtime |
2013-02-26 |
Scott Wood |
scottwood |
New |
| [U-Boot] mtd: nand: fix the partial page write condition |
2013-03-02 |
htbegin |
scottwood |
New |
| [U-Boot,v3,1/2] mtd: nand: Introduce CONFIG_SYS_NAND_BUSWIDTH_16BIT |
2013-02-26 |
Fabio Estevam |
scottwood |
New |
| [U-Boot] mtd: nand: fix the written length when nand_write_skip_bad failed |
2013-03-02 |
htbegin |
scottwood |
New |
| [U-Boot] nand: adjust erase/read/write partition/chip size for bad blocks |
2013-02-27 |
Harvey Chapman |
scottwood |
New |
| [U-Boot,1/1] nand: adjust erase/read/write partition/chip size for bad blocks |
2013-02-27 |
Harvey Chapman |
scottwood |
New |
| [U-Boot,v3,2/2] mtd: nand: mxc_nand: Fix is_16bit_nand() |
2013-02-26 |
Fabio Estevam |
scottwood |
New |
| [U-Boot] cmd_nand: add biterror insertion command for NAND Flash |
2012-01-04 |
Holger Brunck |
scottwood |
Under Review |
| [U-Boot] nand/fsl_ifc: Convert to self-init |
2013-04-05 |
Prabhakar Kushwaha |
scottwood |
New |
| [U-Boot,2/2] nand: remote biterr command stub |
2012-03-28 |
Scott Wood |
scottwood |
Under Review |
| [U-Boot] mtd: nand: use ssize_t instead of size_t to prevent infinite loop |
2013-03-02 |
htbegin |
scottwood |
New |
| [U-Boot] sandbox: block driver using host file/device as backing store |
2013-05-14 |
Henrik Nordström |
sjg |
New |
| [U-Boot,v2,07/16] x86: Replace timer implementation with TSC timer |
2013-04-26 |
Simon Glass |
sjg |
New |
| [U-Boot,1/1] TPM: STMicroelectronics u-boot driver I2C |
2013-05-15 |
Mathias leblanc |
sjg |
New |
| [U-Boot,2/2] buildman: Produce a sensible error message when branch is missing |
2013-05-03 |
Simon Glass |
sjg |
New |
| [U-Boot,v2,2/2] blackfin: bf609: add softswitch config command |
2013-05-13 |
Sonic Zhang |
sonicz |
New |
| [U-Boot,v1,1/3] blackfin: Enable early print via the generic serial API. |
2013-05-13 |
Sonic Zhang |
sonicz |
New |
| [U-Boot,v2,1/2] blackfin: bf609: implement soft switch |
2013-05-13 |
Sonic Zhang |
sonicz |
New |
| [U-Boot,v1,3/3] blackfin: Uart divisor should be set after their values are generated. |
2013-05-13 |
Sonic Zhang |
sonicz |
New |
| [U-Boot,v2,2/2] blackfin: bf609: add softswitch config command |
2013-05-13 |
Zhang, Sonic |
sonicz |
New |
| [U-Boot,v1,2/3] blackfin: Add memory virtual console to blackfin serial driver. |
2013-05-13 |
Sonic Zhang |
sonicz |
New |
| [U-Boot,v2,1/2] blackfin: bf609: implement soft switch |
2013-05-13 |
Zhang, Sonic |
sonicz |
New |
| [U-Boot,07/11] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards |
2013-04-22 |
Dirk Eibach |
stroese |
New |
| [U-Boot,03/11] powerpc/ppc4xx: Add fpgad command for dumping gdsys fpga registers |
2013-04-22 |
Dirk Eibach |
stroese |
New |
| [U-Boot,02/11] powerpc/ppc4xx: Add gdsys mclink interface |
2013-04-22 |
Dirk Eibach |
stroese |
New |
| [U-Boot,10/11] powerpc/ppc4xx: Consider gdsys FPGA OSD size |
2013-04-22 |
Dirk Eibach |
stroese |
New |
| [U-Boot,08/11] powerpc/ppc4xx: Fixup phy erratum on gdsys iocon hardware |
2013-04-22 |
Dirk Eibach |
stroese |
New |
| [U-Boot,06/11] powerpc/ppc4xx: Support gdsys multichannel iocon hardware |
2013-04-22 |
Dirk Eibach |
stroese |
New |
| [U-Boot,05/11] powerpc/ppc4xx: Use generic FPGA accessors in gdsys common code |
2013-04-22 |
Dirk Eibach |
stroese |
New |
| [U-Boot,04/11] powerpc/ppc4xx: Add bitbang i2c interface for gdsys boards |
2013-04-22 |
Dirk Eibach |
stroese |
New |
| [U-Boot] cfi_flash: use CFI driver without a monitor program |
2013-05-17 |
Masahiro Yamada |
stroese |
New |
| [U-Boot,1/2] cosmetic: cfi_flash: delete a space after an unary operator |
2013-05-17 |
Masahiro Yamada |
stroese |
New |
| [U-Boot,2/2] cfi_flash: return NULL for invalid base address input |
2013-05-17 |
Masahiro Yamada |
stroese |
New |
| [U-Boot,v2,5/7] mtd/st_smi: Write to flash in a tight loop |
2012-12-06 |
Vipin Kumar |
stroese |
New |
| [U-Boot] ppc460: read get_sys_info from CPR registers instead of STRP registers |
2011-07-21 |
Mike Williams |
stroese |
Under Review |
| [U-Boot,01/11] powerpc/ppc4xx: Add generic accessor functions for gdsys FPGA |
2013-04-22 |
Dirk Eibach |
stroese |
New |
| [U-Boot,v2] cfi_flash: Fix unaligned accesses to cfi_qry structure |
2013-05-14 |
Andrew Gabbasov |
stroese |
New |
| [U-Boot,v3] spi/arm-pl022: Add support for ARM PL022 spi controller |
2012-12-13 |
Vipin Kumar |
stroese |
New |
| [U-Boot,v2,3/7] mtd/st_smi: Add support for Micron N25Q128 Flash |
2012-12-06 |
Vipin Kumar |
stroese |
New |
| [U-Boot,v2,2/7] mtd/st_smi: Rearrange the supported devices in alphabetical order |
2012-12-06 |
Vipin Kumar |
stroese |
New |
| [U-Boot,09/11] powerpc/ppc4xx: Increase timeout for gdsys mclink bus startup |
2013-04-22 |
Dirk Eibach |
stroese |
New |
| [U-Boot,v2,7/7] mtd/st_smi: Add mtd support for smi |
2012-12-06 |
Vipin Kumar |
stroese |
New |
| [U-Boot,v2,6/7] mtd/st_smi: Use page sizes respective to flash |
2012-12-06 |
Vipin Kumar |
stroese |
New |
| [U-Boot,11/11] powerpc/ppc4xx: Remove CONFIG_SYS_FLASH_PROTECTION from gdsys boards |
2013-04-22 |
Dirk Eibach |
stroese |
New |