Patches

Show patches with: State = Action Required   
« 1 2 ... 5 6 712 13 »
Patch A/R/T S/W/F Date Submitter Delegate State
[U-Boot,v1,31/41] arm64: mvebu: armada-7k/8k: Enable MVPP2 ethernet driver 1 - - 0 0 0 2017-03-21 Stefan Roese stroese New
[U-Boot,v1,32/41] net: mvpp2: Handle eth device naming in multi-CP case correctly 1 - - 0 0 0 2017-03-21 Stefan Roese stroese New
[U-Boot,v1,33/41] net: mvpp2: Add remove function that is called before the OS is started 1 - - 0 0 0 2017-03-21 Stefan Roese stroese New
[U-Boot,v1,34/41] net: mvpp2: Add RX and TX FIFO configuration for PPv2.2 - - - 0 0 0 2017-03-21 Stefan Roese stroese New
[U-Boot,v1,35/41] net: include/phy.h: Add new PHY interface modes 1 - - 0 0 0 2017-03-21 Stefan Roese stroese New
[U-Boot,v1,36/41] net: mvpp2: Add Group-of-Ports and Net-Compex configuration for PPv2.2 - - - 0 0 0 2017-03-21 Stefan Roese stroese New
[U-Boot,v1,37/41] net: mvpp2: Enable PHY polling mode on PPv2.2 1 - - 0 0 0 2017-03-21 Stefan Roese stroese New
[U-Boot,v1,38/41] net: mvpp2: Configure SMI PHY address needed for PHY polling 1 - - 0 0 0 2017-03-21 Stefan Roese stroese New
[U-Boot,v1,39/41] net: mvpp2: Remove unreferenced in_use_thresh from struct mvpp2_bm_pool 1 - - 0 0 0 2017-03-21 Stefan Roese stroese New
[U-Boot,v1,40/41] arm64: mvebu: armada-7040-db.dts: Change eth1 speed from 2.5G to 1G 1 - - 0 0 0 2017-03-21 Stefan Roese stroese New
[U-Boot,v1,41/41] arm64: mvebu: Enable CONFIG_PHY_MARVELL in Armada7k/8k-DB defconfig 1 - - 0 0 0 2017-03-21 Stefan Roese stroese New
[U-Boot,v2,24/24] Revert "Revert "dm: sandbox: Drop the pre-DM host implementation"" - - - 0 0 0 2016-05-01 Simon Glass sjg New
[U-Boot] storage device support for ub_dev_write - - - 0 0 0 2016-07-12 Ihar Filipau sjg New
[U-Boot,2/3] rockchip: rk3188: enable TPL_LIBGENERIC for generic memset 1 - - 0 0 0 2017-02-23 Heiko Stübner sjg New
[U-Boot,U-Boot,1/3] drivers: usb: gadget: add the rockusb gadget - - - 0 0 0 2017-03-15 Eddie Cai sjg New
[U-Boot,U-Boot,2/3] cmd: add rockusb command - - - 0 0 0 2017-03-15 Eddie Cai sjg New
[U-Boot,U-Boot,3/3] rockchip: rk3288: enable rockusb support on rk3288 based device - - - 0 0 0 2017-03-15 Eddie Cai sjg New
[U-Boot,1/2] rockchip: configs: correct mmc env dev for rk3288 based boards - - - 0 0 0 2017-03-15 Jacob Chen sjg New
[U-Boot,2/2] net: gmac_rockchip: Add phy supply support - - - 0 0 0 2017-03-15 Jacob Chen sjg New
[U-Boot,v2,1/4] rockchip: mkimage: simplify start/size calculation for rc4_encode - - 1 0 0 0 2017-03-15 Philipp Tomsich sjg New
[U-Boot,v2,2/4] rockchip: mkimage: pad the header to 8-bytes (using a 'nop') for RK3399 - - 1 0 0 0 2017-03-15 Philipp Tomsich sjg New
[U-Boot,v2,3/4] rockchip: spl: RK3399: use boot0 hook to create space for SPL magic - - 1 0 0 0 2017-03-15 Philipp Tomsich sjg New
[U-Boot,v2,4/4] rockchip: mkimage: update rkimage to support pre-padded payloads - - 1 0 0 0 2017-03-15 Philipp Tomsich sjg New
[U-Boot,v2] Ensure device tree DTS is compiled - - - 0 0 0 2017-03-16 James Balean sjg New
[U-Boot,2/3] rockchip: rk3399: spl: add UART0 support for SPL - 1 - 0 0 0 2017-03-17 Philipp Tomsich sjg New
[U-Boot,3/3] rockchip: config: rk3399: update defconfigs and rk3399_common - 1 - 0 0 0 2017-03-17 Philipp Tomsich sjg New
[U-Boot,1/2] rockchip: pinctrl: use per-SoC option names for Kconfig - 2 - 0 0 0 2017-03-17 Philipp Tomsich sjg New
[U-Boot,2/2] pinctrl: Kconfig: reorder to keep Rockchip options together - - - 0 0 0 2017-03-17 Philipp Tomsich sjg New
[U-Boot,v2] libfdt: use CONFIG_IS_ENABLED for OF_LIBFDT - - - 0 0 0 2017-03-20 Vignesh R sjg New
[U-Boot] rockchip: spl: use spl_early_init() instead of spl_init() - 2 1 0 0 0 2017-03-20 Kever Yang sjg New
[U-Boot,1/3] tpm: Add function to load keys via their parent's SHA1 hash - 1 - 0 0 0 2017-03-20 mario.six@gdsys.cc sjg New
[U-Boot,2/3] cmd: tpm: Fix flush command - 1 - 0 0 0 2017-03-20 mario.six@gdsys.cc sjg New
[U-Boot,3/3] lib: tpm: Add command to list resources - 1 - 0 0 0 2017-03-20 mario.six@gdsys.cc sjg New
[U-Boot,1/8] rockchip: rk3188: sdram: Set correct sdram base - - - 0 0 0 2017-03-20 Heiko Stübner sjg New
[U-Boot,2/8] rockchip: rk3188: Decode the actual amount of ram - - - 0 0 0 2017-03-20 Heiko Stübner sjg New
[U-Boot,3/8] rockchip: rk3188: Cleanup some SPL/TPL rename leftovers - - - 0 0 0 2017-03-20 Heiko Stübner sjg New
[U-Boot,4/8] rockchip: clk: rk3188: Allow configuration of the armclk - - - 0 0 0 2017-03-20 Heiko Stübner sjg New
[U-Boot,5/8] rockchip: rk3188: Setup the armclk in spl - - - 0 0 0 2017-03-20 Heiko Stübner sjg New
[U-Boot,6/8] rockchip: rk3188: Switch to new i2c IP blocks - - - 0 0 0 2017-03-20 Heiko Stübner sjg New
[U-Boot,7/8] rockchip: i2c: Add compatibles for Rockchip Cortex-A9 socs - - - 0 0 0 2017-03-20 Heiko Stübner sjg New
[U-Boot,8/8] rockchip: Enable pmic options and act8846 driver on rk3188 rock boards - - - 0 0 0 2017-03-20 Heiko Stübner sjg New
[U-Boot,1/4,v2] dm: core: Add flags parameter to device_remove() - - - 0 0 0 2017-03-20 Stefan Roese sjg New
[U-Boot,2/4,v2] dm: core: Add dm_remove_devices_flags() and hook it into device_remove() - 1 - 0 0 0 2017-03-20 Stefan Roese sjg New
[U-Boot,3/4,v2] arm: bootm: Add dm_remove_devices_flags() call to announce_and_cleanup() - 1 - 0 0 0 2017-03-20 Stefan Roese sjg New
[U-Boot,4/4,v2] dm: test: Add test for device removal - - - 0 0 0 2017-03-20 Stefan Roese sjg New
[U-Boot,v2,1/7] rockchip: video: Split out HDMI controller code - 1 1 0 0 0 2017-03-20 Jernej Skrabec sjg New
[U-Boot] rockchip: rk3188: enable remap function - - - 0 0 0 2017-03-21 Heiko Stübner sjg New
[U-Boot,v3] fsl-ifc-nand : Corrected the programming of chip select - - - 0 0 0 2016-09-27 Matt Weber scottwood New
[U-Boot] cmd/nand.c: Debug additional helpful NAND info - - - 0 0 0 2016-10-10 Ahmed Samir Khalil scottwood New
[U-Boot] nand: force BBT scan for controllers which need it - - - 0 0 0 2016-10-27 Stefan Agner scottwood New
[U-Boot] fix: nand: Fix nand RW access wrappers - - - 0 0 0 2017-02-22 Kostya Porotchkin scottwood New
[U-Boot,v3] Add nand bootupdate command for i.MX6 and similar platforms - - - 0 0 0 2016-10-08 Sergey Kubushyn sbabic New
[U-Boot,v3] Add nand bootupdate command for i.MX6 and similar platforms - - - 0 0 0 2016-10-08 Sergey Kubushyn sbabic New
[U-Boot,01/13] imx: mx6sl: ddr: add IOM_GRP registers - - - 0 0 0 2016-10-28 Eric Nelson sbabic New
[U-Boot,RESEND] imx-common: hab: fix return value from hab_auth_img - - - 0 0 0 2016-11-27 Eric Nelson sbabic New
[U-Boot] cmd_mmc: fix arg parsing for setdsr subcmd - - - 0 0 0 2017-02-03 Markus Niebel sbabic New
[U-Boot] wandboard: Enable SATA for quad - - - 0 0 0 2017-02-16 Nicolas Chauvet sbabic New
[U-Boot] pmic: ltc3676: add regulator config function - - - 0 0 0 2017-03-21 Tim Harvey sbabic New
[U-Boot] imx: ventana: fix GW5903 VDD_ARM rail - - - 0 0 0 2017-03-21 Tim Harvey sbabic New
[U-Boot] imx: ventana: add new board configs to MAINTAINERS - - - 0 0 0 2017-03-21 Tim Harvey sbabic New
[U-Boot] pmic: ltc3676: add regulator config function - - - 0 0 0 2017-03-21 Tim Harvey sbabic New
[U-Boot,4/4] exynos5: support tps65090 pmic - 1 - 0 0 0 2013-04-02 Simon Glass prom New
[U-Boot,RESEND,RFC] zynq: add support for on-board shared reset gpio - - - 0 0 0 2016-05-11 Andrea Merello monstr New
[U-Boot,RESEND,RFC] zynq: add support for on-board shared reset gpio - - - 0 0 0 2016-05-31 Andrea Merello monstr New
[U-Boot,v3,1/3] spi: spi_flash: Dont set quad enable for micron in all cases - - - 0 0 0 2016-07-19 Siva Durga Prasad Paladugu monstr New
[U-Boot,v3,2/3] spi: zynqmp_qspi: Add QSPI driver support for ZynqMP - - - 0 0 0 2016-07-19 Siva Durga Prasad Paladugu monstr New
[U-Boot,v3,3/3] spi: zynqmp_qspi: Add qspi driver support for ZynqMP boards - - - 0 0 0 2016-07-19 Siva Durga Prasad Paladugu monstr New
[U-Boot,v2,1/9] spi: zynq_qspi: Add quad support for zynq qspi - - - 0 0 0 2016-07-19 Siva Durga Prasad Paladugu monstr New
[U-Boot,v2,2/9] spi: zynq_qspi: Add support of Dual parallel and Dual stacked modes - - - 0 0 0 2016-07-19 Siva Durga Prasad Paladugu monstr New
[U-Boot,v2,3/9] sf: Kconfig: Add SF_DUAL_FLASH config entry - - - 0 0 0 2016-07-19 Siva Durga Prasad Paladugu monstr New
[U-Boot,v2,6/9] spi: spi_flash: Correct flash size calculation - - - 0 0 0 2016-07-19 Siva Durga Prasad Paladugu monstr New
[U-Boot,v2,7/9] spi: spi_flash: Correct bank select incase of dual stacked - - - 0 0 0 2016-07-19 Siva Durga Prasad Paladugu monstr New
[U-Boot,v2,8/9] spi: spi_flash: Fix Bank selection calculation for Dual parallel - - - 0 0 0 2016-07-19 Siva Durga Prasad Paladugu monstr New
[U-Boot,v2,9/9] spi: spi_flash: Set Quad enable bit of upper flash - - - 0 0 0 2016-07-19 Siva Durga Prasad Paladugu monstr New
[U-Boot] getting ubifs to run - - - 0 0 0 2016-08-11 Hoefle Marco monstr New
[U-Boot,11/12] Xilinx ZynqMP: fix minimum SDHCI frequency - - - 0 0 0 2016-11-16 Andre Przywara monstr New
[U-Boot] board: topic: Detect RAM size at boot - - - 0 0 0 2016-11-21 Mike Looijmans monstr New
[U-Boot,v3,1/4] mmc: sdhci: Distinguish between base clock and maximum peripheral frequency - - - 0 0 0 2016-12-02 Stefan Herbrechtsmeier monstr Under Review
[U-Boot,v3,2/4] serial: zynq: Remove unused index from get uart clock function 1 - - 0 0 0 2016-12-02 Stefan Herbrechtsmeier monstr Under Review
[U-Boot,v3,3/4] mmc: zynq: Determine base clock frequency via clock framework - - - 0 0 0 2016-12-02 Stefan Herbrechtsmeier monstr Under Review
[U-Boot,v3,4/4] mmc: zynq: Add fdt max-frequency support 1 - - 0 0 0 2016-12-02 Stefan Herbrechtsmeier monstr Under Review
[U-Boot,01/29] blackfin: Drop CONFIG_SYS_MEMTEST_START/END - - - 0 0 0 2016-12-15 Simon Glass monstr New
[U-Boot,02/29] fdt: Allow the device tree to be set up by board init code - - - 0 0 0 2016-12-15 Simon Glass monstr New
[U-Boot,03/29] blackfin: Add a few useful linker symbols - - - 0 0 0 2016-12-15 Simon Glass monstr New
[U-Boot,04/29] blackfin: Drop the extra blank line in the link script - - - 0 0 0 2016-12-15 Simon Glass monstr New
[U-Boot,05/29] blackfin: Use compiler-generated symbols for BSS - - - 0 0 0 2016-12-15 Simon Glass monstr New
[U-Boot,06/29] blackfin: Clear the BSS in C code - - - 0 0 0 2016-12-15 Simon Glass monstr New
[U-Boot,07/29] blackfin: Add a memory region for pre-relocation data - - - 0 0 0 2016-12-15 Simon Glass monstr New
[U-Boot,08/29] blackfin: Use generic board to set the stack address - - - 0 0 0 2016-12-15 Simon Glass monstr New
[U-Boot,09/29] blackfin: Avoid using bd_info in print_cpuinfo() - - - 0 0 0 2016-12-15 Simon Glass monstr New
[U-Boot,10/29] blackfin: Avoiding using P3 in early init - - - 0 0 0 2016-12-15 Simon Glass monstr New
[U-Boot,11/29] blackfin: Allow cpu_init_f() to return - - - 0 0 0 2016-12-15 Simon Glass monstr New
[U-Boot,12/29] blackfin: Drop CONFIG_STACKBASE - - - 0 0 0 2016-12-15 Simon Glass monstr New
[U-Boot,13/29] tegra: Drop CONFIG_STACKBASE in favour of TEGRA_STACKBASE - - - 0 0 0 2016-12-15 Simon Glass monstr New
[U-Boot,14/29] sparc: Drop CONFIG_SYS_MALLOC_BASE - - - 0 0 0 2016-12-15 Simon Glass monstr New
[U-Boot,15/29] blackfin: Drop CONFIG_SYS_MALLOC_BASE - - - 0 0 0 2016-12-15 Simon Glass monstr New
[U-Boot,16/29] Drop CONFIG_SYS_MALLOC_END - - - 0 0 0 2016-12-15 Simon Glass monstr New
[U-Boot,17/29] blackfin: Call C code to relocate - - - 0 0 0 2016-12-15 Simon Glass monstr New
[U-Boot,18/29] blackfin: Don't set global_data again - - - 0 0 0 2016-12-15 Simon Glass monstr New
[U-Boot,19/29] blackfin: Set the RAM size separately from bd_info - - - 0 0 0 2016-12-15 Simon Glass monstr New
« 1 2 ... 5 6 712 13 »