Patchwork U-Boot

login
register
mail settings

Incoming patches

« Previous 1 2 3 4 5 6 7 8 9 10 ... 11 12 Next »
Filters: State = Action Required remove filter    |    Archived = No remove filter
Patch A/R/T Date Submitter Delegate State
[U-Boot,v2,3/3] ARM: at91: at91sam9x5: save environment to a FAT file in MMC card 1 0 0 2015-01-19 Wu, Josh abiessmann New
[U-Boot,v2,2/3] ARM: at91: sama5d3xek: save enviroment as a FAT file in MMC card 0 0 0 2015-01-19 Wu, Josh abiessmann New
[U-Boot,v2,1/3] ARM: at91: sama5d3_xplained: save environment in a FAT file in MMC card 1 0 0 2015-01-19 Wu, Josh abiessmann New
[U-Boot] dm:gpio:mxc get configuration from dtb 0 0 0 2015-01-19 Peng Fan New
[U-Boot] ARM: atmel: at91sam9m10g45ek: enable SPL 0 0 0 2015-01-19 Heiko Schocher abiessmann New
[U-Boot] arm: spl: Allow board_init_r() to run with a larger stack 3 2 2 2015-01-18 Simon Glass aaribaud New
[U-Boot] usb: musb-new: omap2430: Reset the MUSB controller early 0 0 0 2015-01-18 Paul Kocialkowski New
[U-Boot,RFC] dm:spi:fsl_qspi add DM support 0 0 0 2015-01-17 Peng Fan New
[U-Boot,v4,3/3] imx:mx6 set normal APS and standby PFM mode 0 0 0 2015-01-16 Peng Fan New
[U-Boot,v4,2/3] pmic:pfuze implement pmic_mode_init 0 0 0 2015-01-16 Peng Fan New
[U-Boot,v4,1/3] pmic:pfuz100 add switch mode and more registers 0 1 0 2015-01-16 Peng Fan New
[U-Boot,v3,3/3] imx:mx6 set normal APS and standby PFM mode 0 0 0 2015-01-16 Peng Fan New
[U-Boot,v3,2/3] pmic:pfuze implement pmic_mode_init 0 0 0 2015-01-16 Peng Fan New
[U-Boot,v3,1/3] pmic:pfuz100 add switch mode and more registers 0 0 0 2015-01-16 Peng Fan New
[U-Boot] arm: ls102xa: Define default values for some CCSR macros 0 0 0 2015-01-16 Alison Wang New
[U-Boot,v2] arm: ls1021x: Add support for initializing CAAM's stream id 0 0 0 2015-01-16 Alison Wang New
[U-Boot,v1,6/6] omap3: add support for QUIPOS Cairo board. 0 0 0 2015-01-16 Albert ARIBAUD (3ADEV) New
[U-Boot,v1,5/6] omap3: add some MUX definitions for upcoming cairo 0 0 0 2015-01-16 Albert ARIBAUD (3ADEV) New
[U-Boot,v1,4/6] omap3: mmc: add 1.8v bias setting for MMC1 0 0 0 2015-01-16 Albert ARIBAUD (3ADEV) New
[U-Boot,v1,3/6] omap3: add SDRC settings for Samsung K4X51163PG 0 0 0 2015-01-16 Albert ARIBAUD (3ADEV) New
[U-Boot,v1,2/6] omap3: make SDRC SHARING setting configurable 0 0 0 2015-01-16 Albert ARIBAUD (3ADEV) New
[U-Boot,v1,1/6] omap3: enable GP9 timer and UART2 0 0 0 2015-01-16 Albert ARIBAUD (3ADEV) New
[U-Boot,v1,8/8] lpc32xx: add support for board work_92105 0 0 0 2015-01-16 Albert ARIBAUD (3ADEV) New
[U-Boot,v1,7/8] lpc32xx: add lpc32xx-spl.bin boot image target 0 0 0 2015-01-16 Albert ARIBAUD (3ADEV) New
[U-Boot,v1,6/8] dtt: add ds620 support 0 0 0 2015-01-16 Albert ARIBAUD (3ADEV) New
[U-Boot,v1,4/8] lpc32xx: add GPIO support 0 0 0 2015-01-16 Albert ARIBAUD (3ADEV) New
[U-Boot,v1,3/8] lpc32xx: i2c: add LPC32xx I2C interface support 0 0 0 2015-01-16 Albert ARIBAUD (3ADEV) New
[U-Boot,v1,2/8] lpc32xx: mtd: nand: add MLC NAND controller 0 0 0 2015-01-16 Albert ARIBAUD (3ADEV) New
[U-Boot,v1,1/8] lpc32xx: add Ethernet support 1 0 0 2015-01-16 Albert ARIBAUD (3ADEV) New
[U-Boot,v3,6/6] Exynos5: Remove dead code for fetching clocks 0 0 0 2015-01-16 Akshay Saraswat prom New
[U-Boot,v3,5/6] Exynos5: Use clock_get_periph_rate generic API 0 0 0 2015-01-16 Akshay Saraswat prom New
[U-Boot,v3,4/6] Exynos5: Fix exynos5_get_periph_rate calculations 0 1 1 2015-01-16 Akshay Saraswat prom New
[U-Boot,v3,3/6] Exynos542x: Add and enable get_periph_rate support 0 0 0 2015-01-16 Akshay Saraswat prom New
[U-Boot,v3,2/6] Exynos542x: Move exynos5420_get_pll_clk up and rename 0 1 1 2015-01-16 Akshay Saraswat prom New
[U-Boot,v3,1/6] Exynos5: Fix compiler warnings due to clock_get_periph_rate 0 1 1 2015-01-16 Akshay Saraswat prom New
[U-Boot] ARM: at91: sama5d3_xplained: spl: enable PMECC header generation 1 0 0 2015-01-16 Wu, Josh abiessmann New
[U-Boot,v2,3/6] Exynos542x: Add and enable get_periph_rate support 0 0 0 2015-01-16 Joonyoung Shim New
[U-Boot] mtd: atmel_nand: according to pmecc version to perform 0xff page correction 2 0 0 2015-01-16 Wu, Josh abiessmann New
[U-Boot] ARM: atmel: switch to use common timer functions 0 0 0 2015-01-16 Bo Shen abiessmann New
[U-Boot] ARM: atmel: cleanup: remove at91cap9 related code 1 0 0 2015-01-16 Bo Shen abiessmann New
[U-Boot] ARM: atmel: at91sam9m10g45ek: enable SPL 0 0 0 2015-01-16 Bo Shen abiessmann New
[U-Boot] Please pull u-boot-arc master 0 0 0 2015-01-15 Alexey Brodkin New
[U-Boot] net: ll_temac: Fix compilation warning because of phys_addr_t 0 0 0 2015-01-15 Michal Simek New
[U-Boot,12/12] sun9i: Add Merrii_A80_Optimus board / defconfig file 0 0 0 2015-01-15 Hans de Goede jwrdegoede New
[U-Boot,11/12] sun9i: Basic sun9i (A80) support 1 0 0 2015-01-15 Hans de Goede jwrdegoede New
[U-Boot,04/12] sunxi: Update sunxi-common.h to deal with different DRAM base addr on sun9i 0 0 0 2015-01-15 Hans de Goede jwrdegoede New
[U-Boot,v2,3/3] imx:mx6 set normal APS and standby PFM mode 0 0 0 2015-01-15 Peng Fan New
[U-Boot,v2,2/3] pmic:pfuze implement regulator mode set 0 0 0 2015-01-15 Peng Fan New
[U-Boot,v2,1/3] pmic:pfuz100 add switch mode and more registers 0 0 0 2015-01-15 Peng Fan New
[U-Boot] Nokia RX-51: Use generic board 1 0 0 2015-01-15 Pali Rohár New
[U-Boot] common: bootm: Document fake bootm sub-command 0 1 0 2015-01-15 Michal Simek New
[U-Boot,3/3] ARM: imx6 Add WDOG3 for i.MX6SX 0 0 0 2015-01-15 Peng Fan sbabic New
[U-Boot,2/3] ARM: imx6: disable bandgap self-bias after boot 0 0 0 2015-01-15 Peng Fan sbabic New
[U-Boot,1/3] ARM: imx fix register base address for i.MX6SX 0 0 0 2015-01-15 Peng Fan sbabic New
[U-Boot] powerpc/fsl: support low power boot for e500 and later 0 0 0 2015-01-15 Dongsheng Wang New
[U-Boot,4/4] tools: do not print error messages in verify_header() functions 0 0 0 2015-01-15 Guilherme Maciel Ferreira New
[U-Boot,3/4] dumpimage: fit: extract FIT images 0 0 0 2015-01-15 Guilherme Maciel Ferreira New
[U-Boot,2/4] dumpimage: replace the term "datafile" by "subimage" 0 0 0 2015-01-15 Guilherme Maciel Ferreira New
[U-Boot,1/4] dumpimage: add 'T' option to explicitly set the image type 0 0 0 2015-01-15 Guilherme Maciel Ferreira New
[U-Boot,3/3] imagetool: replace image registration function by linker_lists feature 0 0 0 2015-01-15 Guilherme Maciel Ferreira New
[U-Boot,2/3] imagetool: make the image_save_datafile() available to all image types 0 0 0 2015-01-15 Guilherme Maciel Ferreira New
[U-Boot,1/3] imagetool: move common code to imagetool module 0 0 0 2015-01-15 Guilherme Maciel Ferreira New
[U-Boot] linker_lists: fix misspellings 0 0 0 2015-01-15 Guilherme Maciel Ferreira New
[U-Boot,2/2] doc: fix misspellings 0 0 0 2015-01-15 Guilherme Maciel Ferreira New
[U-Boot,1/2] doc: "os" is also mandatory for "ramdisk" FIT image components 0 0 0 2015-01-15 Guilherme Maciel Ferreira New
[U-Boot,v2,2/2] RFC: Test code for glacier PCI video support 0 0 0 2015-01-15 Simon Glass sjg New
[U-Boot] imx6: disable bandgap self-bias circuit after boot 0 0 0 2015-01-15 Peng Fan New
[U-Boot] Makefile: clean boot.bin 1 0 0 2015-01-15 Bo Shen New
[U-Boot] Pull request: u-boot-video/next 0 0 0 2015-01-14 Anatolij Gustschin New
[U-Boot,PATCHv1,22/22] arm: socfpga: spl: update pll_config for dev kit 0 0 0 2015-01-14 Dinh Nguyen New
[U-Boot,PATCHv1,21/22] arm: socfpga: spl: Add SDRAM check 0 0 0 2015-01-14 Dinh Nguyen New
[U-Boot,PATCHv1,20/22] arm: socfpga: spl: add a malloc section in sram 0 0 0 2015-01-14 Dinh Nguyen New
[U-Boot,PATCHv1,19/22] arm: socfpga: spl: set SPL_MALLOC_SIZE 0 0 0 2015-01-14 Dinh Nguyen New
[U-Boot,PATCHv1,18/22] arm: socfpga: add sdram stack to SPL 0 0 0 2015-01-14 Dinh Nguyen New
[U-Boot,PATCHv1,17/22] arm: socfpga: spl: add CONFIG_SPL_STACK to socfpga_common.h 2 0 0 2015-01-14 Dinh Nguyen New
[U-Boot,PATCHv1,16/22] arm: socfpga: spl: add the stack in OCRAM 0 0 0 2015-01-14 Dinh Nguyen New
[U-Boot,PATCHv1,15/22] arm: socfpga: spl: add relocate_stack_to_sdram to lowlevel_init.S 0 0 0 2015-01-14 Dinh Nguyen New
[U-Boot,PATCHv1,14/22] arm: socfpga: spl: update lowlevel_init 0 0 0 2015-01-14 Dinh Nguyen New
[U-Boot,PATCHv1,13/22] arm: socfpga: spl: Add s_init 0 0 0 2015-01-14 Dinh Nguyen New
[U-Boot,PATCHv1,12/22] arm: socfpga: spl: Use common lowlevel_init 0 0 0 2015-01-14 Dinh Nguyen New
[U-Boot,PATCHv1,11/22] arm: socfpga: spl: printout sdram size 0 0 0 2015-01-14 Dinh Nguyen New
[U-Boot,PATCHv1,10/22] arm: socfpga: spl: add sdram init and calibration 0 0 0 2015-01-14 Dinh Nguyen New
[U-Boot,PATCHv1,09/22] arm: socfpga: spl: allow bootrom to enable IOs after warm reset 1 0 0 2015-01-14 Dinh Nguyen New
[U-Boot,PATCHv1,08/22] arm: socfpga: spl: Add call to timer_init 0 0 0 2015-01-14 Dinh Nguyen New
[U-Boot,PATCHv1,07/22] arm: socfpga: spl: enable sdram, timer and uart 1 0 0 2015-01-14 Dinh Nguyen New
[U-Boot,PATCHv1,06/22] arm: socfpga: add functions to bring sdram, timer, and uart out of reset 2 0 0 2015-01-14 Dinh Nguyen New
[U-Boot,PATCHv1,05/22] arm: socfpga: spl: put SPL in sram 1 0 0 2015-01-14 Dinh Nguyen New
[U-Boot,PATCHv1,04/22] arm: socfpga: spl: Add SRAM section 0 0 0 2015-01-14 Dinh Nguyen New
[U-Boot,PATCHv1,03/22] arm: socfpga: Add sdram initialization code 0 0 0 2015-01-14 Dinh Nguyen New
[U-Boot,PATCHv1,02/22] arm: socfpga: enable saveenv to mmc partition 0 0 0 2015-01-14 Dinh Nguyen New
[U-Boot,PATCHv1,01/22] arm: socfpga: spl: Add main sdram code 0 0 0 2015-01-14 Dinh Nguyen New
[U-Boot] mmc: zynq: Use phys_addr_t for addresses 0 0 0 2015-01-14 Michal Simek monstr New
[U-Boot] net: gem: Use phys_addr_t instead of int for addresses 0 0 0 2015-01-14 Michal Simek monstr New
[U-Boot] serial: Extend structure comments with register offset 0 0 0 2015-01-14 Michal Simek monstr New
[U-Boot,3/3] imx: mx6sxsabresd: Add splash screen support 0 0 0 2015-01-14 Ye.Li sbabic New
[U-Boot,2/3] imx: mx6: Update mx6sx registers and clock functions for display 0 0 0 2015-01-14 Ye.Li sbabic New
[U-Boot,1/3] video: Update MXS LCDIF driver for mx6sx 0 0 0 2015-01-14 Ye.Li sbabic New
[U-Boot] imx: mx6: Fixed AIPS3 base address issue 0 0 0 2015-01-14 Ye.Li sbabic New
[U-Boot,12/12] ARM: zynq: Add USB lthor download protocol support 0 0 0 2015-01-14 Michal Simek monstr New
[U-Boot,11/12] ARM: zynq: Enable DFU functionality in zynq 0 0 0 2015-01-14 Michal Simek monstr New