| [U-Boot,v2] OMAP4: Add ID for OMAP4470_ES1_0 |
2013-04-04 |
Lubomir Popov |
trini |
New |
| [U-Boot,RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested) |
2013-05-15 |
Lubomir Popov |
trini |
New |
| [U-Boot,2/2] OMAP4: Add basic support for OMAP4470/TWL6032 |
2013-04-03 |
Lubomir Popov |
trini |
New |
| [U-Boot] OMAP5: uEVM: Fix pinmux for USB support |
2013-05-16 |
Lubomir Popov |
trini |
New |
| [U-Boot,2/2,v4] tools: add support for Dove to kwboot |
2013-02-12 |
Luka Perkov |
prafulla@marvell.com |
New |
| [U-Boot,1/2] tools: rename kwboot to mvboot |
2013-02-12 |
Luka Perkov |
prafulla@marvell.com |
New |
| [U-Boot] Uboot can't start kernel after change from version 2009.01 to 2010.09 |
2011-01-25 |
Maik Hänig |
|
New |
| [U-Boot] sparc: Fix redefinition of macros in serial driver |
2012-10-31 |
Marek Vasut |
daniel |
New |
| [U-Boot] ARM: mxs: Make the console buffer smaller |
2013-06-15 |
Marek Vasut |
sbabic |
New |
| [U-Boot,08/10] dm: tegra: Staticize local functions in usb.c |
2012-07-21 |
Marek Vasut |
marex |
New |
| [U-Boot] FEC: Rework RX buffer init |
2012-10-09 |
Marek Vasut |
sbabic |
New |
| [U-Boot,V2] ARM: mxs: Consolidate configuration options |
2013-06-16 |
Marek Vasut |
sbabic |
New |
| [U-Boot] Update s3c24x0 timer implementation |
2011-10-31 |
Mark Norman |
prom |
New |
| [U-Boot] cfi_flash: Add prototypes of overridable functions |
2013-06-06 |
Masahiro Yamada |
stroese |
New |
| [U-Boot,1/1] TPM: STMicroelectronics u-boot driver I2C |
2013-05-15 |
Mathias leblanc |
sjg |
New |
| [U-Boot,3/4] nand_spl/spiboot/sdboot: Add ability to have smaller middle loader |
2011-06-02 |
Matthew McClintock |
afleming |
New |
| [U-Boot,4/4] Add P1021MDS board support |
2011-06-02 |
Matthew McClintock |
afleming |
New |
| [U-Boot] net: nfs: add dynamic wait period |
2012-12-11 |
Matthias Brugger |
jhersh |
New |
| [U-Boot] tools/fw_env: use fsync to ensure that data is physically stored |
2013-05-20 |
Michael Heimpold |
trini |
New |
| [U-Boot,1/9] arm926ej-s: Invalidate instruction cache in flush_cache |
2011-03-17 |
Michael Spang |
marex |
Under Review |
| [U-Boot] usb: omap: ulpi: fix ulpi reading/writing functions |
2013-06-10 |
Michael Trimarchi |
trini |
New |
| [U-Boot,v4] usb: omap: ulpi: fix ulpi transceiver access |
2013-06-10 |
Michael Trimarchi |
trini |
New |
| [U-Boot,v2,3/4] microblaze: Disable all cpu features before reset |
2013-04-23 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,2/4] microblaze: Enable netconsole |
2013-04-23 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,4/4] watchdog: Add support for Xilinx Microblaze watchdog |
2013-04-23 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,1/4] microblaze: Fix reset function |
2013-04-23 |
Michal Simek |
monstr |
New |
| [U-Boot,4/4] microblaze: Remove FSL support from generic board |
2013-01-23 |
Michal Simek |
monstr |
New |
| [U-Boot,1/4] board: xilinx: Remove unused ancient i2c driver |
2013-01-23 |
Michal Simek |
monstr |
New |
| [U-Boot,4/4] microblaze: Fix compilation failure because of missing libdts |
2012-10-05 |
Michal Simek |
monstr |
New |
| [U-Boot,3/4] microblaze: Flush caches before enabling them |
2012-10-05 |
Michal Simek |
monstr |
New |
| [U-Boot,2/4] microblaze: Fix byteorder for microblaze |
2012-10-05 |
Michal Simek |
monstr |
New |
| [U-Boot,11/12] microblaze: Clean microblaze initialization |
2012-07-09 |
Michal Simek |
monstr |
New |
| [U-Boot,08/12] microblaze: timer: Prepare for device-tree initialization |
2012-07-09 |
Michal Simek |
monstr |
New |
| [U-Boot,3/5] microblaze: Add support for device tree driven board configuration |
2012-06-29 |
Michal Simek |
monstr |
New |
| [U-Boot,06/12] microblaze: intc: Add device-tree driver configuration |
2012-07-09 |
Michal Simek |
monstr |
New |
| [U-Boot,1/8] microblaze: Do not select NFS for platforms without ethernet |
2011-08-31 |
Michal Simek |
monstr |
New |
| [U-Boot,3/4] common: cmd_bdinfo: Fix compilation warning for microblaze |
2013-01-23 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,2/2] microblaze: bootm: Add support for loading initrd |
2013-05-06 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,5/7] microblaze: timer: Prepare for device-tree initialization |
2012-08-06 |
Michal Simek |
vapier |
New |
| [U-Boot,v2,4/7] microblaze: intc: Coding style cleanup |
2012-08-06 |
Michal Simek |
vapier |
New |
| [U-Boot,12/12] microblaze: board: Use bi_flashstart instead of CONFIG_SYS_FLASH_BASE |
2012-07-09 |
Michal Simek |
monstr |
New |
| [U-Boot,10/12] microblaze: Call serial multi initialization |
2012-07-09 |
Michal Simek |
monstr |
New |
| [U-Boot,09/12] microblaze: timer: Add device-tree driver configuration |
2012-07-09 |
Michal Simek |
monstr |
New |
| [U-Boot,07/12] microblaze: Move __udelay implementation |
2012-07-09 |
Michal Simek |
monstr |
New |
| [U-Boot,04/12] microblaze: intc: Registering interrupt should return value |
2012-07-09 |
Michal Simek |
monstr |
New |
| [U-Boot,03/12] microblaze: intc: Clear interrupt code |
2012-07-09 |
Michal Simek |
monstr |
New |
| [U-Boot,01/12] microblaze: board: Remove compilation warning |
2012-07-09 |
Michal Simek |
monstr |
New |
| [U-Boot,5/5] microblaze: Wire up fdt emaclite initialization |
2012-06-29 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,06/15] net: gem: Simplify return path in zynq_gem_recv |
2013-04-23 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,02/15] arm: zynq: Rename XPSS_ prefix to ZYNQ_ for hardcoded SoC addresses |
2013-04-23 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,01/15] arm: zynq: U-Boot udelay < 1000 FIX |
2013-04-23 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,04/15] net: phy: Define Marvell 88e1518 phy |
2013-04-23 |
Michal Simek |
monstr |
New |
| [U-Boot,8/8] microblaze: Enable phylib support |
2011-08-31 |
Michal Simek |
monstr |
New |
| [U-Boot,2/8] microblaze: Remove address offset for uart16550 |
2011-08-31 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,05/15] net: gem: Remove WRAP bit from TX buffer description |
2013-04-23 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,03/15] zynq: Move scutimer baseaddr to hardware.h |
2013-04-23 |
Michal Simek |
monstr |
New |
| [U-Boot,2/4] board: xilinx: Remove common folder |
2013-01-23 |
Michal Simek |
monstr |
New |
| [U-Boot] microblaze: Add muldi3.c which contains routines for _muldi3 |
2013-01-23 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,08/15] net: gem: Fix gem driver on 1Gbps LAN |
2013-04-23 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,07/15] net: gem: Do not initialize BDs again |
2013-04-23 |
Michal Simek |
monstr |
New |
| [U-Boot,1/4] microblaze: Fix compilation warning in ext2_find_next_zero_bit |
2012-10-05 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,1/2] microblaze: bootm: Fix coding style issues |
2013-05-06 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,15/15] fpga: Add support for loading bitstream for Xilinx Zynq |
2013-04-23 |
Michal Simek |
monstr |
New |
| [U-Boot] microblaze: Call spi_init function |
2012-08-10 |
Michal Simek |
jagan |
Under Review |
| [U-Boot,v2] gpio: Add support for microblaze xilinx GPIO |
2013-05-03 |
Michal Simek |
monstr |
New |
| [U-Boot] spi: xilinx_spi: Perform software reset during slave setup |
2013-01-23 |
Michal Simek |
jagan |
Under Review |
| [U-Boot,v2,10/15] net: gem: Pass phy address to init |
2013-04-23 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,12/15] net: gem: Add support for phy autodetection |
2013-04-23 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,09/15] zynq: Move macros to hardware.h |
2013-04-23 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,13/15] mmc: Add support for Xilinx Zynq sdhci controller |
2013-04-23 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,14/15] i2c: zynq: Add support for Xilinx Zynq |
2013-04-23 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,11/15] net: gem: Preserve clk on emio interface |
2013-04-23 |
Michal Simek |
monstr |
New |
| [U-Boot] pxa: turn icache off in cpu_init_crit() |
2013-06-17 |
Mike Dunn |
|
New |
| [U-Boot] arm: fix memory coherency problem after relocation |
2013-06-17 |
Mike Dunn |
|
New |
| [U-Boot] mtd: nand/docg4: fix driver after Linux resync |
2013-06-17 |
Mike Dunn |
|
New |
| [U-Boot,v6,1/2] pxa: add support for palmtreo680 board |
2013-06-18 |
Mike Dunn |
|
New |
| [U-Boot,v6,2/2] pxa: palmtreo680 flash programming utility |
2013-06-18 |
Mike Dunn |
|
New |
| [U-Boot,1/2] add ST PSD4256G6V to table of supported legacy flashs |
2012-07-31 |
Mike Frysinger |
vapier |
New |
| [U-Boot] tools/env: check flash length before probing |
2012-04-05 |
Mike Frysinger |
jhersh |
New |
| [U-Boot] ppc460: read get_sys_info from CPR registers instead of STRP registers |
2011-07-21 |
Mike Williams |
stroese |
Under Review |
| [U-Boot,V3,1/2] mtd/spi/spi_flash: support CMD_READ_ID=0x90 case |
2012-07-09 |
Mikhail Kshevetskiy |
vapier |
Under Review |
| [U-Boot] powerpc/mpc85xx: explicit cast the SDRAM size to type phys_size_t |
2013-04-12 |
Mingkai Hu |
afleming |
Under Review |
| [U-Boot,v2] fsl_ifc: add support for different IFC bank count |
2013-05-16 |
Mingkai Hu |
afleming |
Under Review |
| [U-Boot] please pull u-boot-samsung master |
2013-06-17 |
Minkyu Kang |
|
New |
| [U-Boot] fdtdec: Add compatible string for High speed i2c |
2013-04-29 |
Naveen Krishna Ch |
hs |
Under Review |
| [U-Boot] bmp: Respect "splashpos" if it is defined |
2013-06-06 |
Otavio Salvador |
ag |
New |
| [U-Boot] mmc: Add an mmcsilent option |
2012-11-29 |
Pantelis Antoniou |
afleming |
New |
| [U-Boot,v3,2/2] Use loop block device in sandbox board |
2012-09-05 |
Pavel Herrmann |
trini |
New |
| [U-Boot,U-BOOT,1/1] smdk2410:coding style cleanup |
2011-05-30 |
Peter Kong |
prom |
Under Review |
| [U-Boot] tpm: add AUTH1 cmds for LoadKey2 and GetPubKey |
2013-04-11 |
Pfau, Reinhard |
trini |
New |
| [U-Boot] sh: Add support for SH2A freestanding build |
2011-06-01 |
Phil Edworthy |
iwamatsu |
New |
| [U-Boot,v3,1/2] imx: Complete the pin definitions for the i.MX6DL / i.MX6Solo |
2013-06-04 |
Pierre Aubert |
sbabic |
New |
| [U-Boot,v3,2/2] imx: Add support for the SabreSD shipped with i.MX6DL |
2013-06-04 |
Pierre Aubert |
sbabic |
New |
| [U-Boot,[PATCH] ] imx6: fix GPR2 wrong definition |
2013-06-19 |
Pierre Aubert |
|
New |
| [U-Boot,2/4] usb:composite: use memcpy to avoid unaligned access |
2013-04-10 |
Piotr Wilczek |
prafulla@marvell.com |
New |
| [U-Boot,3/4] pmic: max77693: add defines for safeout 1 and 2 |
2013-04-10 |
Piotr Wilczek |
prafulla@marvell.com |
New |
| [U-Boot,4/4] trats2: enable ums support on Trats2 |
2013-04-10 |
Piotr Wilczek |
prafulla@marvell.com |
New |
| [U-Boot,v2,7/9] drivers:lcd: fix unaligned access on lcd |
2013-04-04 |
Piotr Wilczek |
prom |
New |
| [U-Boot,v2,4/9] i2c:multi_i2c: add new macros I2C_7 and I2C_10 |
2013-04-04 |
Piotr Wilczek |
prom |
New |
| [U-Boot,v2,6/9] drivers:video:s6e8ax0: change data_to_send array to static |
2013-04-04 |
Piotr Wilczek |
prom |
New |