Patches

Show patches with: State = Action Required   
« 1 2 3 411 12 »
Patch A/R/T S/W/F Date Submitter Delegate State
[U-Boot,V2,19/20] imx: imx7ulp: add EVK board support - - - 0 0 0 2016-12-27 Peng Fan sbabic New
[U-Boot,V2,18/20] mmc: fsl_esdhc: support i.MX7ULP - 1 - 0 0 0 2016-12-27 Peng Fan sbabic New
[U-Boot,V2,17/20] arm: dts: add i.MX7ULP dtsi file - - - 0 0 0 2016-12-27 Peng Fan sbabic New
[U-Boot,V2,16/20] mx7ulp: Add HAB boot support - - - 0 0 0 2016-12-27 Peng Fan sbabic New
[U-Boot,V2,15/20] serial: lpuart: add i.MX7ULP support - - - 0 0 0 2016-12-27 Peng Fan sbabic New
[U-Boot,V2,14/20] serial: lpuart: restructure lpuart driver - - 1 0 0 0 2016-12-27 Peng Fan sbabic New
[U-Boot,V2,13/20] i2c: lpi2c: add lpi2c driver for i.MX7ULP - - - 0 0 0 2016-12-27 Peng Fan sbabic New
[U-Boot,V2,12/20] pinctrl: Add i.MX7ULP pinctrl driver - 1 - 0 0 0 2016-12-27 Peng Fan sbabic New
[U-Boot,V2,11/20] wdog: Add the watchdog driver for MX7ULP. - - - 0 0 0 2016-12-27 Peng Fan sbabic New
[U-Boot,V2,10/20] mx7ulp: Add iomux pins header file - - - 0 0 0 2016-12-27 Peng Fan sbabic New
[U-Boot,V2,09/20] mxc_ocotp: Update driver to support OCOTP controller on i.MX7ULP - - - 0 0 0 2016-12-27 Peng Fan sbabic New
[U-Boot,V2,08/20] gpio: Add Rapid GPIO2P driver for i.MX7ULP - - - 0 0 0 2016-12-27 Peng Fan sbabic New
[U-Boot,V2,07/20] imx: mx7ulp: Implement the clock functions for i2c driver - - - 0 0 0 2016-12-27 Peng Fan sbabic New
[U-Boot,V2,06/20] imx: mx7ulp: handle all the lpuarts in get_lpuart_clk - - - 0 0 0 2016-12-27 Peng Fan sbabic New
[U-Boot,V2,05/20] imx: mx7ulp: Add soc level initialization codes and functions - - - 0 0 0 2016-12-27 Peng Fan sbabic New
[U-Boot,V2,04/20] imx: mx7ulp: Add clock framework and functions - - - 0 0 0 2016-12-27 Peng Fan sbabic New
[U-Boot,V2,03/20] imx: mx7ulp: add iomux driver to support IOMUXC0 and IOMUXC1 - - - 0 0 0 2016-12-27 Peng Fan sbabic New
[U-Boot,V2,02/20] imx: mx7ulp: add registers header file - - - 0 0 0 2016-12-27 Peng Fan sbabic New
[U-Boot,V2,01/20] imx: mx7ulp: Add mx7ulp to Kconfig - - - 0 0 0 2016-12-27 Peng Fan sbabic New
[U-Boot] armv8: fix #if around spin-table code in start.S - - - 0 0 0 2016-12-27 Oded Gabbay trini Under Review
[U-Boot] armv8: ls1046aqds: added usb feature support - - - 0 0 0 2016-12-27 tang yuantian yorksun Under Review
[U-Boot,2/2] armv8: ls1012: Enable CONFIG_DM_USB in defconfigs - - - 0 0 0 2016-12-27 tang yuantian yorksun Under Review
[U-Boot,1/2] armv8: ls1012: added usb nodes in dts - - - 0 0 0 2016-12-27 tang yuantian yorksun Under Review
[U-Boot,v2] api: Use hashtable function for API_env_enum - 1 - 0 0 0 2016-12-26 Emmanuel Vadot trini New
[U-Boot,2/2] armv8: add asserts of sizes to u-boot-spl.lds - - - 0 0 0 2016-12-26 Oded Gabbay trini New
[U-Boot,1/2] armv8: calculate __bss_size in u-boot-spl.lds - - - 0 0 0 2016-12-26 Oded Gabbay trini New
[U-Boot] arm: layerscape: Enable UUID & GPT partition for NXP's ARM SoC - - - 0 0 0 2016-12-26 Prabhakar Kushwaha yorksun Under Review
[U-Boot,2/2] sunxi: enable DLDO4 and DC1SW for Pine64+ - - - 0 0 0 2016-12-23 Icenowy Zheng jagan New
[U-Boot,1/2] sunxi: power: add AXP803 support - - - 0 0 0 2016-12-23 Icenowy Zheng jagan New
[U-Boot,v3,2/2] spl: move RAM boot support in separate file - - - 0 0 0 2016-12-23 Stefan Agner trini Under Review
[U-Boot,v3,1/2] Convert CONFIG_SPL_RAM_DEVICE to defconfig - - - 0 0 0 2016-12-23 Stefan Agner trini Under Review
[U-Boot,2/2] ARM64: zynqmp: Fix i2c node's compatible string - - - 0 0 0 2016-12-22 Moritz Fischer monstr New
[U-Boot,1/2] i2c: cdns: Add additional compatible string for r1p14 of the IP. - - - 0 0 0 2016-12-22 Moritz Fischer monstr New
[U-Boot,V2,3/3] imx: mx6sllevk: add usb support - - - 0 0 0 2016-12-22 Peng Fan sbabic New
[U-Boot,V2,2/3] usb: ehci-mx6: handle vbus-supply - 1 - 0 0 0 2016-12-22 Peng Fan sbabic New
[U-Boot,V2,1/3] usb: ehci-mx6: implement ofdata_to_platdata - 1 - 0 0 0 2016-12-22 Peng Fan sbabic New
[U-Boot] ARM64: zynqmp: Fix i2c node's compatible string - - - 0 0 0 2016-12-22 Moritz Fischer monstr New
[U-Boot,v3,6/6] apalis-tk1: clean-up defconfig - - - 0 0 0 2016-12-22 Marcel Ziswiler tomcwarren New
[U-Boot,v3,5/6] apalis-tk1: disable external clock loopback on SDMMC3 - - - 0 0 0 2016-12-22 Marcel Ziswiler tomcwarren New
[U-Boot,v3,4/6] mmc: tegra: allow disabling external clock loopback - 2 - 0 0 0 2016-12-22 Marcel Ziswiler tomcwarren New
[U-Boot,v3,3/6] mmc: tegra: move CONFIG_TEGRA_MMC from headers to defconfigs - 2 - 0 0 0 2016-12-22 Marcel Ziswiler tomcwarren New
[U-Boot,v3,2/6] mmc: tegra: introduce CONFIG_TEGRA_MMC to Kconfig - 2 - 0 0 0 2016-12-22 Marcel Ziswiler tomcwarren New
[U-Boot,v3,1/6] arm: tegra: initial support for apalis tk1 - 1 - 0 0 0 2016-12-22 Marcel Ziswiler tomcwarren New
[U-Boot] drivers: usb: Add USB_XHCI_ZYNQMP to Kconfig - 2 - 0 0 0 2016-12-21 Michal Simek monstr New
[U-Boot] usb: storage: Show number of storage devices detected for DM_USB - 1 - 0 0 0 2016-12-21 Michal Simek marex New
[U-Boot,v2,2/2] cmd: fdt: Print error message when fdt application fails 2 - - 0 0 0 2016-12-20 Stefan Agner sjg New
[U-Boot,v2,1/2] libfdt: Correct fdt handling of overlays without fixups and base trees without sy... 1 - - 0 0 0 2016-12-20 Stefan Agner sjg New
[U-Boot,v3,2/3] ARM: zynq: Replace board specific with generic memory bank decoding - - - 0 0 0 2016-12-18 Nathan Rossi monstr New
[U-Boot,v3,3/3] ARM64: zynqmp: Replace board specific with generic memory bank decoding - - - 0 0 0 2016-12-18 Nathan Rossi monstr New
[U-Boot,v3,1/3] fdt: add memory bank decoding functions for board setup - 1 - 0 0 0 2016-12-18 Nathan Rossi monstr New
[U-Boot,2/2] usb: gadget: dfu: add result for handle_getstatus() - - - 0 0 0 2016-12-16 Patrick Delaunay lmajewski New
[U-Boot,1/2] usb: gadget: dfu: correct size for USB_REQ_DFU_GETSTATE result - - - 0 0 0 2016-12-16 Patrick Delaunay lmajewski New
[U-Boot,0/2] Series to clean handle_XXX() in f_dfu.c - - - 0 0 0 2016-12-16 Patrick Delaunay lmajewski New
[U-Boot,7/7] ARM64: zynqmp: Enable fastboot for first SD/MMC/EMMC device - - - 0 0 0 2016-12-16 Michal Simek monstr New
[U-Boot,6/7] ARM64: zynqmp: Add one empty line between license and nodes - - - 0 0 0 2016-12-16 Michal Simek monstr New
[U-Boot,5/7] ARM64: zynqmp: Add idle state for ZynqMP 1 - - 0 0 0 2016-12-16 Michal Simek monstr New
[U-Boot,4/7] ARM64: zynqmp: Fix usb nodes for dc1 and dc2 - - - 0 0 0 2016-12-16 Michal Simek monstr New
[U-Boot,3/7] ARM64: zynqmp: Add missing earlycon for ep108 - - - 0 0 0 2016-12-16 Michal Simek monstr New
[U-Boot,2/7] ARM64: zynqmp: clk: Add the clock for watchdog - 1 - 0 0 0 2016-12-16 Michal Simek monstr New
[U-Boot,1/7] ARM64: zynqmp: Add missing SPL dependency for boot.bin generation - - - 0 0 0 2016-12-16 Michal Simek monstr New
[U-Boot,4/4] ARM: dts: zynq: replace gpio-key, wakeup with wakeup-source property - - - 0 0 0 2016-12-16 Michal Simek monstr New
[U-Boot,3/4] ARM: zynq: Setup modeboot variable based on boot mode - - - 0 0 0 2016-12-16 Michal Simek monstr New
[U-Boot,2/4] ARM: zynq: Remove spi-max-frequency - - - 0 0 0 2016-12-16 Michal Simek monstr New
[U-Boot,1/4] ARM: zynq: Remove CONFIG_BOOTP_SERVERIP - - - 0 0 0 2016-12-16 Michal Simek monstr New
[U-Boot,2/2] net: zynq_gem: Use clock driver for ZynqMP - - - 0 0 0 2016-12-16 Michal Simek monstr New
[U-Boot,1/2] clk: zynqmp: Add clock driver support for zynqmp - 1 - 0 0 0 2016-12-16 Michal Simek monstr New
[U-Boot] ARM: zynq: Move CONFIG_SYS_TEXT_BASE to Kconfig - - - 0 0 0 2016-12-16 Michal Simek monstr New
[U-Boot] sf: ids: Correct Micron n25q128 flags - - - 0 0 0 2016-12-16 Phil Edworthy jagan New
[U-Boot,v2] common: Fix logic in fpga programming - 1 - 0 0 0 2016-12-16 Michal Simek monstr New
[U-Boot,v2] fpga: zynqmp: Remove empty functions - - - 0 0 0 2016-12-16 Michal Simek monstr New
[U-Boot] common: Fix logic in fpga programming - - - 0 0 0 2016-12-16 Michal Simek monstr New
[U-Boot,PATCHv2,2/2] armv8/fsl_lsch2: Add the OCRAM initialization - - - 0 0 0 2016-12-16 Zhiqiang Hou yorksun Under Review
[U-Boot,PATCHv2,1/2] ARMv8/fsl-layerscape: Correct the OCRAM size - - - 0 0 0 2016-12-16 Zhiqiang Hou yorksun Under Review
[U-Boot] fpga: zynqmp: Remove empty functions - - - 0 0 0 2016-12-16 Michal Simek monstr New
[U-Boot,2/2] ARM64: zynqmp: Add support to save env to FAT - - - 0 0 0 2016-12-16 Michal Simek monstr New
[U-Boot,1/2] ARM64: zynqmp: Increase environment size to 32K - - - 0 0 0 2016-12-16 Michal Simek monstr New
[U-Boot,2/2] microblaze: Enable option to overwrite default variables - - - 0 0 0 2016-12-16 Michal Simek monstr New
[U-Boot,1/2] microblaze: Remove hardcoded IP address from config - - - 0 0 0 2016-12-16 Michal Simek monstr New
[U-Boot] microblaze: Make the board configuration name user definable - - - 0 0 0 2016-12-16 Michal Simek monstr New
[U-Boot,v2] armv8: fsl-lsch2: enable snoopable usb read and write - - - 0 0 0 2016-12-16 jerry.huang@nxp.com yorksun New
[U-Boot,2/2] spl: move RAM boot support in separate file - - - 0 0 0 2016-12-16 Stefan Agner trini New
[U-Boot,1/2] libfdt: overlay: Fix missing symbols condition - - - 0 0 0 2016-12-15 Stefan Agner trini New
[U-Boot,v2,2/4] mx6qsabreauto: Pass the correct parallel NOR width - - - 0 0 0 2016-12-15 Fabio Estevam sbabic New
[U-Boot,v2,1/4] mx6qsabreauto: Configure the WEIM controller like the kernel - - - 0 0 0 2016-12-15 Fabio Estevam sbabic New
[U-Boot] gpio: zynq: Remove empty line - - - 0 0 0 2016-12-15 Michal Simek monstr New
[U-Boot,29/29] blackfin: Enable driver-model on bf537-stamp - - - 0 0 0 2016-12-15 Simon Glass monstr New
[U-Boot,28/29] blackfin: Set up the debug UART if enabled - - - 0 0 0 2016-12-15 Simon Glass monstr New
[U-Boot,27/29] dm: blackfin: Add a driver-model serial driver - - - 0 0 0 2016-12-15 Simon Glass monstr New
[U-Boot,26/29] dm: serial: Update the serial README - - - 0 0 0 2016-12-15 Simon Glass monstr New
[U-Boot,25/29] dm: serial: pxa: Drop pxa from the serial README - - - 0 0 0 2016-12-15 Simon Glass monstr New
[U-Boot,24/29] dm: serial: Reset the watchdog when outputting characters - - - 0 0 0 2016-12-15 Simon Glass monstr New
[U-Boot,23/29] blackfin: bf537-stamp: Enable CONFIG_OF_CONTROL - - - 0 0 0 2016-12-15 Simon Glass monstr New
[U-Boot,22/29] blackfin: Allow use of CONFIG_OF_CONTROL - - - 0 0 0 2016-12-15 Simon Glass monstr New
[U-Boot,21/29] blackfin: Copy the device tree out of BSS - - - 0 0 0 2016-12-15 Simon Glass monstr New
[U-Boot,20/29] blackfin: Set up bd_info later - - - 0 0 0 2016-12-15 Simon Glass monstr New
[U-Boot,19/29] blackfin: Set the RAM size separately from bd_info - - - 0 0 0 2016-12-15 Simon Glass monstr New
[U-Boot,18/29] blackfin: Don't set global_data again - - - 0 0 0 2016-12-15 Simon Glass monstr New
[U-Boot,17/29] blackfin: Call C code to relocate - - - 0 0 0 2016-12-15 Simon Glass monstr New
[U-Boot,16/29] Drop CONFIG_SYS_MALLOC_END - - - 0 0 0 2016-12-15 Simon Glass monstr New
[U-Boot,15/29] blackfin: Drop CONFIG_SYS_MALLOC_BASE - - - 0 0 0 2016-12-15 Simon Glass monstr New
« 1 2 3 411 12 »