| [U-Boot] fdt: allow bootdelay to be specified via device tree |
2013-05-14 |
Stephen Warren |
gvb |
New |
| [U-Boot] board/bsc9131rdb: Add targets for Sysclk 100MHz |
2013-04-01 |
Priyanka Jain |
afleming |
New |
| [U-Boot,1/5] arm: generalize lib/bss.c into lib/sections.c |
2013-05-14 |
Albert ARIBAUD |
aaribaud |
New |
| [U-Boot] OMAP5: Power: Added more functionality to twl6035 driver |
2013-04-01 |
Lubomir Popov |
trini |
New |
| [U-Boot,4/5] arm: ensure u-boot only uses relative relocations |
2013-05-14 |
Albert ARIBAUD |
aaribaud |
New |
| [U-Boot,v3,batch,3,01/17] common: Update cmd_bdinfo for PPC |
2013-05-14 |
York Sun |
afleming |
New |
| [U-Boot,2/2] powerpc/83xx/km: make local functions and structs static |
2013-05-06 |
Holger Brunck |
afleming |
New |
| [U-Boot,1/3] usb: properly re-initialize the USB keyboard. |
2013-05-11 |
Simon Glass |
marex |
New |
| [U-Boot,2/3] usb: workaround non-working keyboards. |
2013-05-11 |
Simon Glass |
marex |
New |
| [U-Boot,1/4] power: Add support for TPS65090 PMU chip. |
2013-04-02 |
Simon Glass |
prom |
New |
| [U-Boot,2/2] OMAP4: Add basic support for OMAP4470/TWL6032 |
2013-04-03 |
Lubomir Popov |
trini |
New |
| [U-Boot,1/4,V4] EXYNOS5: FDT: Add compatible strings for Serial |
2013-04-02 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,3/4,V4] S5P: Serial: Add fdt support to driver |
2013-04-02 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,1/1] OMAP4/5: I2C: New read/write/probe functions |
2013-04-04 |
Lubomir Popov |
trini |
New |
| [U-Boot,2/4,V4] EXYNOS5: FDT: Add serial device node values |
2013-04-02 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,4/4,V4] CONFIG: EXYNOS5: Enable silent console |
2013-04-02 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,v2] OMAP4: Add ID for OMAP4470_ES1_0 |
2013-04-04 |
Lubomir Popov |
trini |
New |
| [U-Boot,PATCHv3,2/6] spl_mmc: mmc_load_image_fat(): Add filename argument and move fat init out |
2013-05-13 |
Peter Korsgaard |
trini |
New |
| [U-Boot] exynos: Enable mmc for snow |
2013-05-11 |
Simon Glass |
prom |
New |
| [U-Boot,v2] spi: mxc_spi: Update pre and post divider algorithm |
2013-05-11 |
Dirk Behme |
prom |
New |
| [U-Boot,RFC] ARM: byteorder: add optimized swab16 and swab32 |
2013-05-10 |
Dirk Behme |
aaribaud |
New |
| [U-Boot,v3,1/9] fpga: Clean coding style |
2013-05-03 |
Michal Simek |
aaribaud |
New |
| [U-Boot,v3,3/9] cmd: fpga: Clean coding style |
2013-05-03 |
Michal Simek |
aaribaud |
New |
| [U-Boot,v3,5/9] fpga: Change the first parameter in fpga_loadbitstream |
2013-05-03 |
Michal Simek |
aaribaud |
New |
| [U-Boot,v3,9/9] fpga: Remove all CONFIG_SYS_* fpga related options |
2013-05-03 |
Michal Simek |
aaribaud |
New |
| [U-Boot] add support for Xilinx 1000BASE-X phy (GTX) |
2013-02-21 |
Charles Coldwell |
jhersh |
New |
| [U-Boot] OMAP4/5: Add USB EHCI support |
2013-04-01 |
Lubomir Popov |
trini |
New |
| [U-Boot,2/4] exynos5: Enable tps65090 on smdk5250 |
2013-04-02 |
Simon Glass |
prom |
New |
| [U-Boot,3/4] power: Explicitly select pmic device's bus |
2013-04-02 |
Simon Glass |
prom |
New |
| [U-Boot,4/4] exynos5: support tps65090 pmic |
2013-04-02 |
Simon Glass |
prom |
New |
| [U-Boot] sparc: Fix redefinition of macros in serial driver |
2012-10-31 |
Marek Vasut |
daniel |
New |
| [U-Boot,v1] arm:trats: change auto-booting to boot kernel with separate device tree blob |
2013-04-02 |
a.wlodarczyk@samsung.com |
prom |
New |
| [U-Boot,3/4] ELPPC: Don't write magic numbers via short. |
2013-05-13 |
Tom Rini |
trini |
New |
| [U-Boot,SPEAr,Fixes,05/11] spear: Append MISC_ as prefix to misc register bitmasks |
2012-11-02 |
Vipin Kumar |
vipink |
New |
| [U-Boot,v3] command/cache: Add flush command |
2013-04-05 |
York Sun |
trini |
New |
| [U-Boot,2/4] Exynos5: cpufreq: Implement frequency scaling for exynos5 |
2013-04-03 |
Akshay Saraswat |
prom |
New |
| [U-Boot,3/4] smdk5250: enable support for tmu throttling |
2013-04-03 |
Akshay Saraswat |
prom |
New |
| [U-Boot,4/4] Exynos5: config: enable cpu freq |
2013-04-03 |
Akshay Saraswat |
prom |
New |
| [U-Boot,1/2] power: exynos-tmu: fix warnings and clean up code |
2013-04-05 |
Naveen Krishna Ch |
prom |
New |
| [U-Boot,v2] spi: mxc_spi: Set master mode for all channels |
2013-05-01 |
Dirk Behme |
sbabic |
New |
| [U-Boot,v2] powerpc/mpc85xx: Clear L1 D-cache lock |
2013-04-05 |
York Sun |
afleming |
New |
| [U-Boot,SPEAr,Enhancement,1/9] spear: Add cache support |
2012-11-02 |
Vipin Kumar |
vipink |
New |
| [U-Boot,SPEAr13xx,3/7] spear1340evb: Add support for evb machine |
2012-11-02 |
Vipin Kumar |
vipink |
New |
| [U-Boot,SPEAr,Enhancement,4/9] spear/configs: Modify several configurations |
2012-11-02 |
Vipin Kumar |
vipink |
New |
| [U-Boot,SPEAr13xx,5/7] spear1340lcad: Add support for LCAD machine |
2012-11-02 |
Vipin Kumar |
vipink |
New |
| [U-Boot,SPEAr13xx,6/7] spear1340evb: Add SPL support |
2012-11-02 |
Vipin Kumar |
vipink |
New |
| [U-Boot,SPEAr,Fixes,06/11] spear: Read ethaddr from I2C memory |
2012-11-02 |
Vipin Kumar |
vipink |
New |
| [U-Boot,v8,3/4] usb: ehci: add Faraday USB 2.0 EHCI support |
2013-05-14 |
Kuo-Jung Su |
marex |
New |
| [U-Boot,v8,4/4] usb: gadget: add Faraday FOTG210 USB gadget support |
2013-05-14 |
Kuo-Jung Su |
marex |
New |
| [U-Boot] EXYNOS: Move includes from setup.h to tzpc_init.c |
2013-04-03 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,2/2] am33xx: Board: Make CPSW section of ethernet initialization depend on CPSW driver |
2013-05-07 |
Joel A Fernandes |
trini |
New |
| [U-Boot,V8,2/9] EXYNOS5: FDT: Add DWMMC device node data |
2013-04-03 |
Amar |
prom |
New |
| [U-Boot,V8,4/9] EXYNOS5: DWMMC: Added FDT support for DWMMC |
2013-04-03 |
Amar |
prom |
New |
| [U-Boot,V8,6/9] SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT |
2013-04-03 |
Amar |
prom |
New |
| [U-Boot,V8,7/9] MMC: APIs to support resize of EMMC boot partition |
2013-04-03 |
Amar |
prom |
New |
| [U-Boot,V8,8/9] SMDK5250: Enable EMMC booting |
2013-04-03 |
Amar |
prom |
New |
| [U-Boot,2/3] net: macb: using phylib to configure phy device |
2013-04-24 |
Bo Shen |
jhersh |
New |
| [U-Boot,v2,5/6] drivers:i2c:s3c24x0: modify driver for new I2C framework |
2012-11-20 |
Piotr Wilczek |
hs |
New |
| [U-Boot,v2,6/6] arm:trats: add support for new I2C framework |
2012-11-20 |
Piotr Wilczek |
hs |
New |
| [U-Boot,08/22] net: Add sunxi (Allwinner) wemac driver |
2012-11-25 |
Henrik Nordström |
jhersh |
New |
| [U-Boot,09/22] ARM: sun4i: Enable ethernet support (wemac) on A10 boards |
2012-11-25 |
Henrik Nordström |
jhersh |
New |
| [U-Boot,09/11] powerpc/ppc4xx: Increase timeout for gdsys mclink bus startup |
2013-04-22 |
Dirk Eibach |
stroese |
New |
| [U-Boot] I2C: Exynos5: Reduce the Delay in s3c24x0 i2c driver |
2013-03-25 |
Akshay Saraswat |
prom |
New |
| [U-Boot,v2,3/6] arm: mvf600: Add FEC support for Vybrid MVF600 |
2013-05-14 |
Alison Wang |
aaribaud |
New |
| [U-Boot,v9,4/5] usb: ehci: add Faraday USB 2.0 EHCI support |
2013-05-15 |
Kuo-Jung Su |
marex |
New |
| [U-Boot,v9,5/5] usb: gadget: add Faraday FOTG210 USB gadget support |
2013-05-15 |
Kuo-Jung Su |
marex |
New |
| [U-Boot] EXYNOS: SPI: Support word transfers |
2013-03-25 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot] exynos: i2c: Use generic api to get i2c clk freq |
2013-03-25 |
Akshay Saraswat |
prom |
New |
| [U-Boot] exynos: uart: Use generic api to the uart clk freq |
2013-03-25 |
Akshay Saraswat |
prom |
New |
| [U-Boot,v2,4/6] arm: mvf600: Add watchdog support for Vybrid MVF600 |
2013-05-14 |
Alison Wang |
aaribaud |
New |
| [U-Boot,v2,5/6] arm: mvf600: Add uart support for Vybrid MVF600 |
2013-05-14 |
Alison Wang |
aaribaud |
New |
| [U-Boot,v2,6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board |
2013-05-14 |
Alison Wang |
aaribaud |
New |
| [U-Boot] powerpc/c29xpcie: add readme document for c29xpcie |
2013-05-16 |
Po Liu |
afleming |
New |
| [U-Boot,2/2] net: add ICPlus PHY driver |
2012-11-28 |
Yegor Yefremov |
jhersh |
New |
| [U-Boot,v2,batch,3,02/17] powerpc/t4240qds: Add board detail for bdinfo command |
2013-03-25 |
York Sun |
afleming |
New |
| [U-Boot,v2,batch,4,04/29] powerpc/mpc85xx: check if core is disabled for showing status |
2013-03-25 |
York Sun |
afleming |
New |
| [U-Boot,v2,batch,4,08/29] powerpc/p5040: enable NAND, SD, SPI boot support |
2013-03-25 |
York Sun |
afleming |
New |
| [U-Boot,v2,batch,4,10/29] powerpc/mpc8xxx: Add T1040 and variant SoCs |
2013-03-25 |
York Sun |
afleming |
New |
| [U-Boot,v2,batch,4,13/29] powerpc/qixis: add clock measurement registers |
2013-03-25 |
York Sun |
afleming |
New |
| [U-Boot,v2,batch,4,12/29] powerpc/mpc8xxx: Allow DDR overclock |
2013-03-25 |
York Sun |
afleming |
New |
| [U-Boot,v2,batch,4,18/29] powerpc/t4qds: Add SW7[4] in the DIP switch display |
2013-03-25 |
York Sun |
afleming |
New |
| [U-Boot,v2,batch,4,19/29] powerpc/t4240qds: fix PHY reset timeout issue |
2013-03-25 |
York Sun |
afleming |
New |
| [U-Boot,v2,batch,4,20/29] powerpc/doc: Fix the misalignment of document README.srio-pcie-boot-corenet |
2013-03-25 |
York Sun |
afleming |
New |
| [U-Boot,v2,batch,4,02/29] Enable L2 cache parity/ECC error checking |
2013-03-25 |
York Sun |
afleming |
New |
| [U-Boot,v2,batch,4,23/29] sf: spansion: Add support for S25FL128S |
2013-03-25 |
York Sun |
afleming |
New |
| [U-Boot,v2,batch,4,03/29] net/phy: fix select line for TN80xx |
2013-03-25 |
York Sun |
afleming |
New |
| [U-Boot,v2,batch,4,07/29] Add e6500 L2 replacement policy selection |
2013-03-25 |
York Sun |
afleming |
New |
| [U-Boot,v2,batch,4,11/29] powerpc/chassis2: Change core numbering scheme |
2013-03-25 |
York Sun |
afleming |
New |
| [U-Boot,v2,batch,4,15/29] powerpc/p5040: enable PBL tool support |
2013-03-25 |
York Sun |
afleming |
New |
| [U-Boot,v2,batch,4,29/29] SECURE BOOT - Removed deletion of TLB entries code |
2013-03-25 |
York Sun |
afleming |
New |
| [U-Boot,v2,batch,4,22/29] powerpc/p2041: fix serdes reference clock frequency display for PC board |
2013-03-25 |
York Sun |
afleming |
New |
| [U-Boot,v2,batch,4,25/29] powerpc/p5040: fix mdio mux for 10G port |
2013-03-25 |
York Sun |
afleming |
New |
| [U-Boot,v2,batch,4,24/29] powerpc/B4: Merge B4420 and B4860 in config_mpc85xx.h |
2013-03-25 |
York Sun |
afleming |
New |
| [U-Boot,06/10] pxe: always display a menu when present |
2012-12-03 |
Rob Herring |
jhersh |
New |
| [U-Boot,02/10] pxe: make string parameters const |
2012-12-03 |
Rob Herring |
jhersh |
New |
| [U-Boot,04/10] bootz: un-staticize do_bootz |
2012-12-03 |
Rob Herring |
jhersh |
New |
| [U-Boot,05/10] pxe: use bootz instead of bootm when enabled |
2012-12-03 |
Rob Herring |
jhersh |
New |
| [U-Boot,08/10] pxe: add support for ontimeout token |
2012-12-03 |
Rob Herring |
jhersh |
New |
| [U-Boot,10/10] pxe: add ipappend support |
2012-12-03 |
Rob Herring |
jhersh |
New |
| [U-Boot,01/10] pxe: Use ethact setting for pxe |
2012-12-03 |
Rob Herring |
jhersh |
New |