| [U-Boot,2/2] spi: mxc_spi: Update pre and post divider algorithm |
2013-05-09 |
Dirk Behme |
sbabic |
New |
| [U-Boot,v2,1/2] spi: mxc_spi: Fix pre and post divider calculation |
2013-05-09 |
Dirk Behme |
sbabic |
New |
| [U-Boot,v5,4/4] usb: gadget: add Faraday FOTG210 USB gadget support |
2013-05-09 |
Kuo-Jung Su |
marex |
New |
| [U-Boot,v5,3/4] usb: ehci: add Faraday USB 2.0 EHCI support |
2013-05-09 |
Kuo-Jung Su |
marex |
New |
| [U-Boot,v5,2/4] usb: ehci: add weak-aliased functions to portsc & tdi |
2013-05-09 |
Kuo-Jung Su |
marex |
New |
| [U-Boot,v5,1/4] usb: hub: make minimum power-on delay configurable |
2013-05-09 |
Kuo-Jung Su |
marex |
New |
| [U-Boot,v5] nand: add Faraday FTNANDC021 NAND controller support |
2013-05-09 |
Kuo-Jung Su |
aaribaud |
New |
| [U-Boot] powerpc/p1022ds: boot from SD card/SPI flash with SPL |
2013-05-08 |
ying.zhang@freescale.com |
afleming |
New |
| [U-Boot,v5] i2c: add Faraday FTI2C010 I2C controller support |
2013-05-08 |
Kuo-Jung Su |
aaribaud |
New |
| [U-Boot] video: exynos: remove unused variable of exynos_mipi_dsi_wr_data() |
2013-05-08 |
Donghwa Lee |
prom |
New |
| [U-Boot,2/2] ARM: bcm2835: add simplefb DT node during bootz/m |
2013-05-08 |
Stephen Warren |
aaribaud |
New |
| [U-Boot,1/2] lcd: add functions to setup up simplefb device tree |
2013-05-08 |
Stephen Warren |
aaribaud |
New |
| [U-Boot] video: exynos: Change mipi dsi write function parameters correctly |
2013-05-08 |
Donghwa Lee |
prom |
New |
| [U-Boot,V2] powerpc/esdhc: Correct judgement for DATA PIO mode |
2013-05-08 |
Haijun.Zhang |
afleming |
Under Review |
| [U-Boot,2/2] am33xx: Board: Make CPSW section of ethernet initialization depend on CPSW driver |
2013-05-07 |
Joel A Fernandes |
trini |
New |
| [U-Boot,6/6,v2] powerpc/t4qds: Slave module for boot from SRIO and PCIE |
2013-05-07 |
Liu Gang |
afleming |
New |
| [U-Boot,5/6,v2] powerpc/t4qds: Enable master module for Boot from SRIO and PCIE |
2013-05-07 |
Liu Gang |
afleming |
New |
| [U-Boot,4/6,v2] powerpc/b4860qds: Slave module for boot from SRIO and PCIE |
2013-05-07 |
Liu Gang |
afleming |
New |
| [U-Boot,3/6,v2] powerpc/b4860qds: Enable master module for boot from SRIO and PCIE |
2013-05-07 |
Liu Gang |
afleming |
New |
| [U-Boot,2/6,v2] powerpc/boot: Change the macro of Boot from SRIO and PCIE master module |
2013-05-07 |
Liu Gang |
afleming |
New |
| [U-Boot,1/6,v2] powerpc/doc: Update the README.srio-pcie-boot-corenet |
2013-05-07 |
Liu Gang |
afleming |
New |
| [U-Boot,PULL] : Please pull u-boot-imx |
2013-05-07 |
Stefano Babic |
aaribaud |
New |
| [U-Boot,v2] video: add Faraday FTLCDC200 LCD controller support |
2013-05-07 |
Kuo-Jung Su |
aaribaud |
New |
| [U-Boot,v4] spi: add Faraday FTSPI010 SPI controller support |
2013-05-07 |
Kuo-Jung Su |
aaribaud |
New |
| [U-Boot,v4] net: update FTGMAC100 for MMU/D-cache support |
2013-05-07 |
Kuo-Jung Su |
aaribaud |
New |
| [U-Boot,v4] net: add Faraday FTMAC110 10/100Mbps ethernet support |
2013-05-07 |
Kuo-Jung Su |
aaribaud |
New |
| [U-Boot,v4] mmc: update Faraday FTSDC010 for rw performance |
2013-05-07 |
Kuo-Jung Su |
afleming |
Under Review |
| [U-Boot,v4,7/7] arm: add Faraday A36x SoC platform support |
2013-05-07 |
Kuo-Jung Su |
aaribaud |
New |
| [U-Boot,v4,6/7] arm: add Faraday firmware image utility |
2013-05-07 |
Kuo-Jung Su |
aaribaud |
New |
| [U-Boot,v4,5/7] arm: add Faraday FTPWMTMR010 timer support |
2013-05-07 |
Kuo-Jung Su |
aaribaud |
New |
| [U-Boot,v4,4/7] arm: add Faraday FTTMR010 timer support |
2013-05-07 |
Kuo-Jung Su |
aaribaud |
New |
| [U-Boot,v4,3/7] arm: add Faraday interrupt controller support |
2013-05-07 |
Kuo-Jung Su |
aaribaud |
New |
| [U-Boot,v4,2/7] arm: add Faraday common utilities |
2013-05-07 |
Kuo-Jung Su |
aaribaud |
New |
| [U-Boot,v4,1/7] arm: add MMU/D-Cache support for Faraday cores |
2013-05-07 |
Kuo-Jung Su |
aaribaud |
New |
| [U-Boot] powerpc/mpc85xx:Fix "boot page TLB" entry size for NAND SPL |
2013-05-07 |
Prabhakar Kushwaha |
afleming |
New |
| [U-Boot,6/6] ARM: VExpress: enable ARMv7 virt support for VExpress A15 |
2013-05-06 |
Andre Przywara |
aaribaud |
New |
| [U-Boot,5/6] ARM: extend non-secure switch to also go into HYP mode |
2013-05-06 |
Andre Przywara |
aaribaud |
New |
| [U-Boot,4/6] ARM: add SMP support for non-secure switch |
2013-05-06 |
Andre Przywara |
aaribaud |
New |
| [U-Boot,3/6] ARM: switch to non-secure state during bootm execution |
2013-05-06 |
Andre Przywara |
aaribaud |
New |
| [U-Boot,2/6] ARM: add assembly routine to switch to non-secure state |
2013-05-06 |
Andre Przywara |
aaribaud |
New |
| [U-Boot,1/6] ARM: add secure monitor handler to switch to non-secure state |
2013-05-06 |
Andre Przywara |
aaribaud |
New |
| [U-Boot] arm/km: make local functions static |
2013-05-06 |
Holger Brunck |
aaribaud |
New |
| [U-Boot,2/2] powerpc/83xx/km: make local functions and structs static |
2013-05-06 |
Holger Brunck |
afleming |
New |
| [U-Boot,1/2] powerpc/83xx/km: MV88e6122 errata fix for 1.9V |
2013-05-06 |
Holger Brunck |
afleming |
New |
| [U-Boot,v2,2/2] microblaze: bootm: Add support for loading initrd |
2013-05-06 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,1/2] microblaze: bootm: Fix coding style issues |
2013-05-06 |
Michal Simek |
monstr |
New |
| [U-Boot,PULL] u-boot-pxa.git/master |
2013-05-06 |
Marek Vasut |
aaribaud |
New |
| [U-Boot,4/6] README: mxs: Introduce README.mxs |
2013-05-03 |
Fabio Estevam |
sbabic |
New |
| [U-Boot,3/6] README: mx28_common: Fix structure of sentence |
2013-05-03 |
Fabio Estevam |
sbabic |
New |
| [U-Boot,2/6] README: mx28_common: Do not hardcode the SSP port |
2013-05-03 |
Fabio Estevam |
sbabic |
New |
| [U-Boot,1/6] README: mx28_common: Keep the text within 80 columns |
2013-05-03 |
Fabio Estevam |
sbabic |
New |
| [U-Boot] mx23: Add a README file |
2013-05-03 |
Fabio Estevam |
sbabic |
New |
| [U-Boot,v3,9/9] fpga: Remove all CONFIG_SYS_* fpga related options |
2013-05-03 |
Michal Simek |
aaribaud |
New |
| [U-Boot,v3,8/9] fpga: Check device name against bitstream name |
2013-05-03 |
Michal Simek |
aaribaud |
New |
| [U-Boot,v3,7/9] fpga: zynq: Add support for loading bitstream |
2013-05-03 |
Michal Simek |
aaribaud |
New |
| [U-Boot,v3,6/9] cmd: fpga: Do not include net.h |
2013-05-03 |
Michal Simek |
aaribaud |
New |
| [U-Boot,v3,5/9] fpga: Change the first parameter in fpga_loadbitstream |
2013-05-03 |
Michal Simek |
aaribaud |
New |
| [U-Boot,v3,4/9] cmd: fpga: Move fpga_loadbitstream to fpga.c |
2013-05-03 |
Michal Simek |
aaribaud |
New |
| [U-Boot,v3,3/9] cmd: fpga: Clean coding style |
2013-05-03 |
Michal Simek |
aaribaud |
New |
| [U-Boot,v3,2/9] fpga: Fix debug message compilation error |
2013-05-03 |
Michal Simek |
aaribaud |
New |
| [U-Boot,v3,1/9] fpga: Clean coding style |
2013-05-03 |
Michal Simek |
aaribaud |
New |
| [U-Boot,v2] gpio: Add support for microblaze xilinx GPIO |
2013-05-03 |
Michal Simek |
monstr |
New |
| [U-Boot,2/2] EXYNOS: SPI: Support SPI_PREAMBLE mode |
2013-05-03 |
Vadim Bendebury |
prom |
New |
| [U-Boot,2/2] buildman: Produce a sensible error message when branch is missing |
2013-05-03 |
Simon Glass |
sjg |
New |
| [U-Boot] spi: mxc_spi: Fix pre and post divider calculation |
2013-05-02 |
Dirk Behme |
sbabic |
New |
| [U-Boot,v2] spi: mxc_spi: Set master mode for all channels |
2013-05-01 |
Dirk Behme |
sbabic |
New |
| [U-Boot] fdt_support: Use CONFIG_NR_DRAM_BANKS if defined |
2013-04-30 |
Doug Anderson |
trini |
Under Review |
| [U-Boot] net: phy: supplement support for Micrel's KSZ9031 |
2013-04-30 |
SARTRE Leo |
jhersh |
New |
| [U-Boot,v5,7/7] mpc85xx: Add gdsys ControlCenter Digital board |
2013-04-30 |
Dirk Eibach |
afleming |
New |
| [U-Boot,v5,6/7] Build arch/$ARCH/lib/bootm.o depending on CONFIG_CMD_BOOTM |
2013-04-30 |
Dirk Eibach |
afleming |
New |
| [U-Boot,v5,5/7] Add Atmel I2C tpm |
2013-04-30 |
Dirk Eibach |
afleming |
New |
| [U-Boot,v5,4/7] i2c: fsl_i2c: i2c_read(): dont try to write address w/ alen=0 |
2013-04-30 |
Dirk Eibach |
afleming |
New |
| [U-Boot,v5,3/7] mpc85xx: Add CONFIG_RELEASE_CORE0_ONLY |
2013-04-30 |
Dirk Eibach |
afleming |
New |
| [U-Boot,v5,2/7] tpm: add AUTH1 cmds for LoadKey2 and GetPubKey |
2013-04-30 |
Dirk Eibach |
afleming |
New |
| [U-Boot,v5,1/7] Update gdsys email account |
2013-04-30 |
Dirk Eibach |
afleming |
New |
| [U-Boot] Pull request - zynq |
2013-04-30 |
Michal Simek |
aaribaud |
New |
| [U-Boot] fdtdec: Add compatible string for High speed i2c |
2013-04-29 |
Naveen Krishna Ch |
hs |
Under Review |
| [U-Boot] ARM: cfi_flash: Fix unaligned accesses to cfi_qry structure |
2013-04-29 |
Andrew Gabbasov |
stroese |
New |
| [U-Boot,3/3] Tegra: Config: Enable Tegra30/Tegra114 USB function |
2013-04-29 |
Jim Lin |
tomcwarren |
Under Review |
| [U-Boot,2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114 |
2013-04-29 |
Jim Lin |
tomcwarren |
Under Review |
| [U-Boot,1/3] ARM: Tegra: FDT: Add USB support for T20/T30/T114 |
2013-04-29 |
Jim Lin |
tomcwarren |
Under Review |
| [U-Boot] p1020rdb-pd: platform support |
2013-04-28 |
Haijun.Zhang |
afleming |
New |
| [U-Boot,V9,9/9] COMMON: MMC: Command to support EMMC booting and to resize EMMC boot partition |
2013-04-27 |
Amar |
prom |
New |
| [U-Boot,V9,8/9] SMDK5250: Enable EMMC booting |
2013-04-27 |
Amar |
prom |
New |
| [U-Boot,V9,7/9] MMC: APIs to support resize of EMMC boot partition |
2013-04-27 |
Amar |
prom |
New |
| [U-Boot,V9,6/9] SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT |
2013-04-27 |
Amar |
prom |
New |
| [U-Boot,V9,5/9] EXYNOS5: DWMMC: Initialise the local variable to avoid unwanted results. |
2013-04-27 |
Amar |
prom |
New |
| [U-Boot,V9,4/9] EXYNOS5: DWMMC: Added FDT support for DWMMC |
2013-04-27 |
Amar |
prom |
New |
| [U-Boot,V9,3/9] DWMMC: Initialise dwmci and resolve EMMC read write issues |
2013-04-27 |
Amar |
prom |
New |
| [U-Boot,V9,2/9] EXYNOS5: FDT: Add DWMMC device node data |
2013-04-27 |
Amar |
prom |
New |
| [U-Boot,V9,1/9] FDT: Add compatible string for DWMMC |
2013-04-27 |
Amar |
prom |
New |
| [U-Boot,v2,07/16] x86: Replace timer implementation with TSC timer |
2013-04-26 |
Simon Glass |
sjg |
New |
| [U-Boot,v3,11/11] arm: add Faraday A36x SoC platform support |
2013-04-26 |
Kuo-Jung Su |
aaribaud |
New |
| [U-Boot,v3,10/11] video: add Faraday FTLCDC200 LCD controller support |
2013-04-26 |
Kuo-Jung Su |
ag |
Under Review |
| [U-Boot,v3,07/11] mtd: nand: add Faraday FTNANDC021 NAND controller support |
2013-04-26 |
Kuo-Jung Su |
scottwood |
New |
| [U-Boot,v3,05/11] spi: add Faraday FTSPI010 SPI controller support |
2013-04-26 |
Kuo-Jung Su |
aaribaud |
New |
| [U-Boot,v3,04/11] i2c: add Faraday FTI2C010 I2C controller support |
2013-04-26 |
Kuo-Jung Su |
hs |
New |
| [U-Boot,v3,03/11] net: add Faraday FTMAC110 10/100Mbps ethernet support |
2013-04-26 |
Kuo-Jung Su |
jhersh |
New |
| [U-Boot,v3,02/11] net: ftgmac100: add MMU/D-cache support |
2013-04-26 |
Kuo-Jung Su |
jhersh |
New |
| [U-Boot,v3,01/11] arm: add MMU/D-Cache support for Faraday cores |
2013-04-26 |
Kuo-Jung Su |
aaribaud |
New |