|
[U-Boot,02/11] ARM: at91: ma5d4: Switch DDR2 controller to sequencial address decoding
|
- - - |
0 0 0 |
2017-05-02 |
Marek Vasut |
abiessmann |
New |
|
[U-Boot,01/11] ARM: atmel: Rename MA5D4EVK
|
- - - |
0 0 0 |
2017-05-02 |
Marek Vasut |
abiessmann |
New |
|
[U-Boot] clk: at91: clk-generated: Fix incorrect assignment of clock source
|
- 1 - |
0 0 0 |
2017-04-26 |
Wenyou Yang |
abiessmann |
New |
|
[U-Boot] configs: sama5d4_xplained: Fix wrong CONFIG_DEBUG_UART_CLOCK
|
- - - |
0 0 0 |
2017-04-20 |
Wenyou Yang |
abiessmann |
New |
|
[U-Boot,v2] spi: atmel: check GPIO validity before using cs_gpios
|
- - - |
0 0 0 |
2017-03-23 |
Wenyou Yang |
abiessmann |
New |
|
[U-Boot,v5] mmc: gen_atmel_mci: add driver model support for mci
|
1 1 - |
0 0 0 |
2017-03-23 |
Wenyou Yang |
abiessmann |
New |
|
[U-Boot,2/2] board: at91sam9261ek: update for DT and DM support
|
- - - |
0 0 0 |
2017-02-27 |
Wenyou Yang |
abiessmann |
New |
|
[U-Boot,1/2] ARM: dts: at91: add dts files for at91sam9261ek
|
- - - |
0 0 0 |
2017-02-27 |
Wenyou Yang |
abiessmann |
New |
|
[U-Boot,3/3] board: at91sam9m10g45ek: clean up code
|
- - - |
0 0 0 |
2017-02-24 |
Wenyou Yang |
abiessmann |
New |
|
[U-Boot,2/3] board: at91sam9m10g45ek: move config options to defconfig
|
- - - |
0 0 0 |
2017-02-24 |
Wenyou Yang |
abiessmann |
New |
|
[U-Boot,1/3] ARM: dts: at91: add dts files for at91sam9m10g45ek
|
- - - |
0 0 0 |
2017-02-24 |
Wenyou Yang |
abiessmann |
New |
|
[U-Boot,v2,4/4] configs: at91sam9x5ek: move SYS_NO_FLASH to defconfig
|
- 1 - |
0 0 0 |
2017-02-07 |
Wenyou Yang |
abiessmann |
New |
|
[U-Boot,v2,3/4] board: at91sam9x5ek: enable early debug UART
|
- 1 - |
0 0 0 |
2017-02-07 |
Wenyou Yang |
abiessmann |
New |
|
[U-Boot,v2,2/4] board: at91sam9x5ek: clean up code
|
- 1 - |
0 0 0 |
2017-02-07 |
Wenyou Yang |
abiessmann |
New |
|
[U-Boot,v2,1/4] board: at91sam9x5ek: move config options to defconfig
|
- 1 - |
0 0 0 |
2017-02-07 |
Wenyou Yang |
abiessmann |
New |
|
[U-Boot,v5] dm/mmc: gen_atmel_mci: Add driver model support for mci
|
- 1 - |
0 0 0 |
2017-02-07 |
Wenyou Yang |
abiessmann |
New |
|
[U-Boot,RESEND,v2] ARM: at91: add default config file for sama5d36ek CMP board
|
- - - |
0 0 0 |
2017-02-07 |
Wenyou Yang |
abiessmann |
New |
|
[U-Boot,v2] ARM: dts: at91: add device tree files for at91sam9x5ek
|
- - - |
0 0 0 |
2017-02-07 |
Wenyou Yang |
abiessmann |
New |
|
[U-Boot] nand: atmel: add drvice tree support and dm gpio APIs
|
- - - |
0 0 0 |
2017-02-04 |
Wenyou Yang |
abiessmann |
New |
|
[U-Boot,1/4] board: at91sam9x5ek: move config options to defconfig
|
- 1 - |
0 0 0 |
2017-02-03 |
Wenyou Yang |
abiessmann |
New |
|
[U-Boot] ARM: dts: at91: add device tree files for at91sam9x5ek
|
- - - |
0 0 0 |
2017-02-03 |
Wenyou Yang |
abiessmann |
New |
|
[U-Boot] net: macb: add .remove callback
|
1 - - |
0 0 0 |
2017-01-25 |
Wenyou Yang |
abiessmann |
New |
|
[U-Boot] spi: atmel: check the GPIO validity before using cs_gpios
|
- - - |
0 0 0 |
2017-01-24 |
Wenyou Yang |
abiessmann |
New |
|
[U-Boot,4/4] defconfig: sama5: remove SoCs from CONFIG_SYS_EXTRA_OPTIONS
|
- - - |
0 0 0 |
2017-01-06 |
Wenyou Yang |
abiessmann |
New |
|
[U-Boot,3/4] ARM: at91: sama5: add SoC configs to Kconfig
|
- - - |
0 0 0 |
2017-01-06 |
Wenyou Yang |
abiessmann |
New |
|
[U-Boot,2/4] ARM: at91: sama5: remove hardware.h included in board config
|
- - - |
0 0 0 |
2017-01-06 |
Wenyou Yang |
abiessmann |
New |
|
[U-Boot,1/4] ARM: at91: move CONFIG_AT91FAMILY option to Kconfig
|
- - - |
0 0 0 |
2017-01-06 |
Wenyou Yang |
abiessmann |
New |
|
[U-Boot] ARM: at91: move PIO_SCDR_DIV to mach/at91_pio.h
|
- - - |
0 0 0 |
2017-01-06 |
Wenyou Yang |
abiessmann |
New |
|
[U-Boot,v1] sama5d2_xplained: move CONFIG_SYS_NO_FLASH to default config files
|
- - - |
0 0 0 |
2016-11-04 |
Wenyou Yang |
abiessmann |
New |
|
[U-Boot,v1] clk: at91: pmc: add more compatibles
|
- 1 - |
0 0 0 |
2016-10-26 |
Wenyou Yang |
abiessmann |
New |
|
[U-Boot,v1] ARM: dts: Makefile: Use board to decide to compile dts
|
- 1 - |
0 0 0 |
2016-09-18 |
Wenyou Yang |
abiessmann |
New |
|
[U-Boot,6/6,RFC] at91: SPL clock fix for AT91SAM9G15 based boards.
|
- - - |
0 0 0 |
2016-08-17 |
Heiko Schocher |
abiessmann |
New |
|
[U-Boot,5/6] at91: add function to set IO drive
|
1 - - |
0 0 0 |
2016-08-17 |
Heiko Schocher |
abiessmann |
New |
|
[U-Boot,4/6] arm, at91: add some missing fields in PIO struct
|
1 - - |
0 0 0 |
2016-08-17 |
Heiko Schocher |
abiessmann |
New |
|
[U-Boot] Boot failure with a AT91RM9200 based custom board
|
- - - |
0 0 0 |
2016-08-12 |
Peter Kardos |
abiessmann |
New |
|
[U-Boot] arc: Add support for HS Development Kit board
|
- - - |
0 0 0 |
2017-06-26 |
Alexey Brodkin |
abrodkin |
New |
|
[U-Boot] arcv2: Set IOC aperture so it covers available DDR
|
- - - |
0 0 0 |
2017-06-26 |
Alexey Brodkin |
abrodkin |
New |
|
[U-Boot] arc: Move dram_init out of arch code, into board code
|
- - - |
0 0 0 |
2017-06-05 |
Alexandru Gagniuc |
abrodkin |
New |
|
[U-Boot] axs10x: Move environment from I2C EEPROM to SD-card
|
- - - |
0 0 0 |
2017-06-01 |
Alexey Brodkin |
abrodkin |
New |
|
[U-Boot] axs10x: Get rid of both I2C and EEPROM who used to use I2C
|
- 1 - |
0 0 0 |
2017-06-01 |
Alexey Brodkin |
abrodkin |
New |
|
[U-Boot] boards: axs10x, nsim, tb100: Enable cmdline history
|
- - - |
0 0 0 |
2017-04-21 |
Alexey Brodkin |
abrodkin |
New |
|
[U-Boot] axs10x: Add support of Ext2/4 FS
|
- - - |
0 0 0 |
2017-04-21 |
Alexey Brodkin |
abrodkin |
New |
|
[U-Boot] axs101: Enable data cache
|
- - - |
0 0 0 |
2017-04-21 |
Alexey Brodkin |
abrodkin |
New |
|
[U-Boot] arc: arcv1: Disable master/slave check
|
- - - |
0 0 0 |
2017-04-21 |
Alexey Brodkin |
abrodkin |
New |
|
[U-Boot] axs10x: Introduce UART clk device
|
- - - |
0 0 0 |
2016-10-27 |
Zakharov Vlad |
abrodkin |
New |
|
[U-Boot] dm: video: fix abuse of enum
|
- - - |
0 0 0 |
2017-06-20 |
Lothar Waßmann |
ag |
New |
|
[U-Boot,2/2] rockchip: video: document externally visible functions for rk_vop
|
- 1 - |
0 0 0 |
2017-06-02 |
Philipp Tomsich |
ag |
Under Review |
|
[U-Boot,1/2] rockchip: video: document externally visible functions for rk_hdmi
|
- 1 - |
0 0 0 |
2017-06-02 |
Philipp Tomsich |
ag |
Under Review |
|
[U-Boot] video: atmel_hlcdfb: Fix misaligned cache operation warning
|
- 1 - |
0 0 0 |
2017-06-02 |
Wenyou Yang |
ag |
Under Review |
|
[U-Boot,v2,4/4] sunxi: video: Add H3/H5 TV out driver
|
- - - |
0 0 0 |
2017-05-19 |
Jernej Skrabec |
ag |
Under Review |
|
[U-Boot,RESEND] video: bcm2835: add support for reading from the video-mode environment variable
|
- - - |
0 0 0 |
2017-01-19 |
Brian Masney |
ag |
Under Review |
|
[U-Boot,RESEND] video: bcm2835: add support for reading from the video-mode environment variable
|
- - - |
0 0 0 |
2017-01-12 |
Brian Masney |
ag |
Under Review |
|
[U-Boot,1/1] efi_loader: provide meaningful status code
|
- - - |
0 0 0 |
2017-06-25 |
xypron.glpk@gmx.de |
agraf |
New |
|
[U-Boot,1/1] efi_loader: abort on unsupported relocation type
|
- - - |
0 0 0 |
2017-06-25 |
xypron.glpk@gmx.de |
agraf |
New |
|
[U-Boot,RFC] efi: variable support
|
- - - |
0 0 0 |
2017-06-24 |
Rob Clark |
agraf |
New |
|
[U-Boot,1/1] bootefi: allow return without EFI_BOOT_SERVICES.Exit
|
- - - |
0 0 0 |
2017-06-24 |
xypron.glpk@gmx.de |
agraf |
New |
|
[U-Boot] efi_loader: add static to local functions
|
- 1 - |
0 0 0 |
2017-06-22 |
Masahiro Yamada |
agraf |
New |
|
[U-Boot,1/1] efi_loader: disk: iterate only over valid block devices
|
- 1 - |
0 0 0 |
2017-06-20 |
xypron.glpk@gmx.de |
agraf |
New |
|
[U-Boot,v2] efi: Export mbr partition for EFI.
|
- - - |
0 0 0 |
2017-06-20 |
Emmanuel Vadot |
agraf |
New |
|
[U-Boot,2/2] efi_loader: check CreateEvent() parameters
|
- - - |
0 0 0 |
2017-03-12 |
Jonathan Gray |
agraf |
New |
|
[U-Boot,1/2] efi_loader: run CreateEvent() notify function based on flags
|
- - - |
0 0 0 |
2017-03-12 |
Jonathan Gray |
agraf |
New |
|
[U-Boot] x86: extend baudrate table with 57600
|
- - - |
0 0 0 |
2017-06-06 |
Christian Gmeiner |
bmeng |
New |
|
[U-Boot,3/3] x86: baytrail: secureboot: Add functions for verification of U-Boot
|
- - - |
0 0 0 |
2017-05-16 |
Anatolij Gustschin |
bmeng |
New |
|
[U-Boot,v2,2/3] x86: baytrail: Add fsp-header verification for secure boot fsp
|
- - - |
0 0 0 |
2017-05-16 |
Anatolij Gustschin |
bmeng |
New |
|
[U-Boot,v2,1/3] x86: congatec: add secureboot enabled defconfig for conga-qeval20-qa3-e3845
|
- 1 - |
0 0 0 |
2017-05-16 |
Anatolij Gustschin |
bmeng |
New |
|
[U-Boot,v1] cpu: Add Intel Tangier support
|
- 1 - |
0 0 0 |
2017-04-18 |
Andy Shevchenko |
bmeng |
New |
|
[U-Boot,v1] watchdog: Introduce watchdog driver for Intel Tangier
|
- - - |
0 0 0 |
2017-04-18 |
Andy Shevchenko |
bmeng |
New |
|
[U-Boot,v3,2/2] MIPS: Stop building position independent code
|
- 1 1 |
0 0 0 |
2017-06-19 |
Paul Burton |
danielschwierzeck |
Under Review |
|
[U-Boot,1/2] Makefile: Allow arch post-link hook
|
- 3 1 |
0 0 0 |
2017-06-16 |
Paul Burton |
danielschwierzeck |
Under Review |
|
[U-Boot,RESEND,v2,5/5] net: pch_gbe: Support PHY reset GPIOs
|
- 2 1 |
0 0 0 |
2017-04-30 |
Daniel Schwierzeck |
danielschwierzeck |
Under Review |
|
[U-Boot,13/13] mips: jz47xx: Add Creator CI20 platform
|
- - - |
0 0 0 |
2016-12-01 |
Marek Vasut |
danielschwierzeck |
Under Review |
|
[U-Boot,12/13] mips: jz47xx: Add minimal JZ MMC node
|
- - - |
0 0 0 |
2016-12-01 |
Marek Vasut |
danielschwierzeck |
Under Review |
|
[U-Boot,11/13] mips: jz47xx: Add JZ4780 SoC support
|
- - - |
0 0 0 |
2016-12-01 |
Marek Vasut |
danielschwierzeck |
Under Review |
|
[U-Boot,10/13] mips: Add SPL header
|
- - - |
0 0 0 |
2016-12-01 |
Marek Vasut |
danielschwierzeck |
Under Review |
|
[U-Boot,09/13] misc: Add JZ47xx efuse driver
|
- - - |
0 0 0 |
2016-12-01 |
Marek Vasut |
danielschwierzeck |
Under Review |
|
[U-Boot,08/13] gpio: Add JZ47xx GPIO driver
|
- - - |
0 0 0 |
2016-12-01 |
Marek Vasut |
danielschwierzeck |
Under Review |
|
[U-Boot,06/13] mmc: Add JZ47xx SD/MMC controller driver
|
- - - |
0 0 0 |
2016-12-01 |
Marek Vasut |
danielschwierzeck |
Under Review |
|
[U-Boot,22/23] boston: Probe ethernet controller during boot
|
- - - |
0 0 0 |
2016-09-26 |
Paul Burton |
danielschwierzeck |
Under Review |
|
[U-Boot,21/23] boston: Enable Realtek ethernet PHY support
|
- - - |
0 0 0 |
2016-09-26 |
Paul Burton |
danielschwierzeck |
Under Review |
|
[U-Boot,15/23] gpio: eg20t: Add driver for Intel EG20T GPIO controllers
|
- 1 1 |
0 0 0 |
2016-09-26 |
Paul Burton |
danielschwierzeck |
Under Review |
|
[U-Boot,14/23] gpio: Provide dummy get/request & is_valid functions
|
- - - |
0 0 0 |
2016-09-26 |
Paul Burton |
danielschwierzeck |
Under Review |
|
[U-Boot,09/23] boston: Disable PCI bridge memory space alignment
|
- 2 - |
0 0 0 |
2016-09-26 |
Paul Burton |
danielschwierzeck |
Under Review |
|
[U-Boot,08/23] pci: Make PCI bridge memory alignment configurable
|
- 1 - |
0 0 0 |
2016-09-26 |
Paul Burton |
danielschwierzeck |
Under Review |
|
[U-Boot,07/23] pci: Handle MIPS systems with virtual CONFIG_SYS_SDRAM_BASE
|
- - - |
0 0 0 |
2016-09-26 |
Paul Burton |
danielschwierzeck |
Under Review |
|
[U-Boot,06/23] pci: Set of_offset for devices not probed via DT compatible strings
|
- - - |
0 0 0 |
2016-09-26 |
Paul Burton |
danielschwierzeck |
Under Review |
|
[U-Boot,05/23] pci: xilinx: Avoid writing memory base or limit registers
|
- - - |
0 0 0 |
2016-09-26 |
Paul Burton |
danielschwierzeck |
Under Review |
|
[U-Boot,04/23] pci: xilinx: Initialise the root bridge during probe
|
- - - |
0 0 0 |
2016-09-26 |
Paul Burton |
danielschwierzeck |
Under Review |
|
[U-Boot,v2,2/2] tpm: Add i2c TPM driver
|
- - - |
0 0 0 |
2011-12-19 |
Che-liang Chiou |
hs |
New |
|
[U-Boot] ARM: rmobile: Increase console buffer sizes
|
- - - |
0 0 0 |
2017-06-17 |
Marek Vasut |
iwamatsu |
New |
|
[U-Boot,2/2] ARM: rmobile: ulcb: Add ULCB board support
|
- - - |
0 0 0 |
2017-06-07 |
Marek Vasut |
iwamatsu |
New |
|
[U-Boot,1/2] ARM: rmobile: Add PFC PUEN bank 5 address
|
- - - |
0 0 0 |
2017-06-07 |
Marek Vasut |
iwamatsu |
New |
|
[U-Boot,v3] sun50i: h5: Add initial NanoPi NEO2 support
|
- - 1 |
0 0 0 |
2017-06-14 |
Jagannadha Sutradharudu Teki |
jagan |
New |
|
[U-Boot,v3,4/4] mips: bmips: enable the SPI flash on the Comtrend AR-5387un
|
- 2 - |
0 0 0 |
2017-06-14 |
Álvaro Fernández Rojas |
jagan |
New |
|
[U-Boot,v3,3/4] mips: bmips: add bcm63xx-hsspi driver support for BCM63268
|
- 2 - |
0 0 0 |
2017-06-14 |
Álvaro Fernández Rojas |
jagan |
New |
|
[U-Boot,v3,2/4] mips: bmips: add bcm63xx-hsspi driver support for BCM6328
|
- 2 - |
0 0 0 |
2017-06-14 |
Álvaro Fernández Rojas |
jagan |
New |
|
[U-Boot,v3,1/4] dm: spi: add BCM63xx HSSPI driver
|
- 2 - |
0 0 0 |
2017-06-14 |
Álvaro Fernández Rojas |
jagan |
New |
|
[U-Boot,v4,10/10] mips: bmips: enable the SPI flash on the Netgear CG3100D
|
- 1 - |
0 0 0 |
2017-06-14 |
Álvaro Fernández Rojas |
jagan |
New |
|
[U-Boot,v4,09/10] mips: bmips: enable the SPI flash on the Sagem F@ST1704
|
- 1 - |
0 0 0 |
2017-06-14 |
Álvaro Fernández Rojas |
jagan |
New |
|
[U-Boot,v4,08/10] mips: bmips: add bcm63xx-spi driver support for BCM63268
|
- 1 - |
0 0 0 |
2017-06-14 |
Álvaro Fernández Rojas |
jagan |
New |
|
[U-Boot,v4,07/10] mips: bmips: add bcm63xx-spi driver support for BCM3380
|
- 1 - |
0 0 0 |
2017-06-14 |
Álvaro Fernández Rojas |
jagan |
New |