Patchwork U-Boot

login
register
mail settings

Incoming patches

« Previous 1 2 3 4 5 6 7 8 9 Next »
Filters: State = Action Required remove filter    |    Archived = No remove filter
Patch A/R/T Date Submitter Delegate State
[U-Boot,v1,1/1] jffs2: change U_BOOT_CMD ls to fsls 0 0 0 2013-10-10 Suriyan Ramasami trini New
[U-Boot,v2,13/40] i2c: Add high-level API 0 0 0 2014-08-26 Thierry Reding hs New
[U-Boot,v2,12/40] i2c: Refactor adapter initialization 0 0 0 2014-08-26 Thierry Reding hs New
[U-Boot,v2,11/40] i2c: Initialize the correct bus 0 0 0 2014-08-26 Thierry Reding hs New
[U-Boot,2/2] image: Only relocate ramdisk when necessary 0 0 0 2013-09-20 Thierry Reding trini New
[U-Boot,1/2] image: Don't relocate ramdisk to highmem 0 0 0 2013-09-20 Thierry Reding trini New
[U-Boot] nios2: rebase nios2-generic board to 3c120 reference design 0 0 0 2014-08-30 Thomas Chou thomaschou New
[U-Boot,v2] nios2: link to CONFIG_SYS_MONITOR_BASE and remove text_base hook 0 0 0 2014-08-28 Thomas Chou thomaschou New
[U-Boot] serial: move nios2-yanu.h into opencores_yanu driver 0 0 0 2014-08-25 Thomas Chou thomaschou New
[U-Boot] nios2: move nios2.h to arch asm directory 0 0 0 2014-08-25 Thomas Chou thomaschou New
[U-Boot] nios2: divide nios2-io.h into each specific drivers and remove it 0 0 0 2014-08-25 Thomas Chou thomaschou New
[U-Boot] nios2: remove epled driver 0 0 0 2014-08-25 Thomas Chou thomaschou New
[U-Boot] nios2: remove EPCS driver 0 0 0 2014-08-23 Thomas Chou thomaschou New
[U-Boot,v2] nios2: add generic board support 0 1 0 2014-08-21 Thomas Chou thomaschou New
[U-Boot] Xilinx Zed Board resets with Master 0 0 0 2014-03-28 Tim Sander monstr New
[U-Boot] dwc_ahsata.c: Add weak disable_sata_clock 0 0 0 2014-11-25 Tom Rini New
[U-Boot] fs/ext4/ext4fs.c, fs/fs.c: Use lldiv and multiplication / subtraction on 64bit ops 0 1 0 2014-11-24 Tom Rini New
[U-Boot] buildman: Save *.img files too 1 0 0 2014-11-11 Tom Rini sjg New
[U-Boot] openrd: Undefine CONFIG_CMD_NFS 0 0 0 2014-10-23 Tom Rini prafulla@marvell.com New
[U-Boot,3/3] sf: ti_qspi: Enable EDMA for reads in SPL 0 0 0 2014-07-11 Tom Rini jagan Under Review
[U-Boot,2/3] dma: Add TI EDMA driver 0 0 0 2014-07-11 Tom Rini trini New
[U-Boot,1/3] sf: ops: Add spi_flash_copy_mmap function 0 0 0 2014-07-11 Tom Rini jagan Under Review
[U-Boot,2/2] am335x: Switch to CONFIG_SPL_BOOTCOUNT_SUPPORT 0 0 0 2013-09-27 Tom Rini trini New
[U-Boot,1/2] SPL: Add CONFIG_SPL_BOOTCOUNT_SUPPORT 0 0 0 2013-09-27 Tom Rini trini New
[U-Boot] OSE support shouldnt be enabled by default 0 0 0 2011-05-13 Torkel Lundgren vapier New
[U-Boot] powerpc/mpc85xx: use correct dma compatible for several SoCs 0 0 0 2014-11-20 Tudor Laurentiu yorksun New
[U-Boot,RFC,7/7] Switch am335x_evm.h to use config_distro_defaults and config_distro_bootcmd. Add scriptaddr to DEFAULT_LINUX_BOOT_ENV, as scriptaddr is used for boot scripts in config_distro_bootcmd. 0 0 0 2014-10-03 Vagrant Cascadian trini New
[U-Boot,RFC,6/7] Add support for loading environment from uEnv.txt in config_distro_bootcmd. 0 0 0 2014-10-03 Vagrant Cascadian trini New
[U-Boot,RFC,5/7] Only set CONFIG_BOOTDELAY if not already set. 0 0 0 2014-10-03 Vagrant Cascadian trini New
[U-Boot,RFC,4/7] Add BOOTENV_POST_COMMAND, which is appended to the end of bootcmd. 0 0 0 2014-10-03 Vagrant Cascadian trini New
[U-Boot,RFC,3/7] Add BOOTENV_INIT_COMMAND for commands that may be needed to run before bootcmd, such as setting the fdt file variables for platfroms that detect on boot. 0 0 0 2014-10-03 Vagrant Cascadian trini New
[U-Boot,RFC,2/7] Allow overriding boot_partitions default value by setting BOOTENV_BOOT_PARTITIONS before including config_distro_bootcmd. 0 0 0 2014-10-03 Vagrant Cascadian trini New
[U-Boot,RFC,1/7] Allow checking in multiple partitions for scan_dev_for_boot. 0 0 0 2014-10-03 Vagrant Cascadian trini New
[U-Boot,v2,3/3] km_arm: call 'sf release' in the newenv and update scripts 0 0 0 2014-11-03 Valentin Longchamp jagan New
[U-Boot,v2,2/3] cmd_sf: add 'release' command 0 0 0 2014-11-03 Valentin Longchamp jagan New
[U-Boot,v2,1/3] env_sf: generalize call to spi_flash_free after accesses 0 0 0 2014-11-03 Valentin Longchamp jagan New
[U-Boot,3/3] km_arm: call 'sf release' in the newenv and update scripts 0 0 0 2013-09-17 Valentin Longchamp jagan Under Review
[U-Boot,2/3] cmd_sf: add 'release' command 0 0 0 2013-09-17 Valentin Longchamp jagan Under Review
[U-Boot] Disable FLASH_AMLV256U support for TOP860 target 0 0 0 2014-06-16 Vasili Galka wd Under Review
[U-Boot,v6,2/3] zipitz2: enable pxa27x_mkp driver 0 0 0 2012-01-25 Vasily Khoruzhick marex New
[U-Boot,v6,1/3] PXA: PXA27x Matrix keypad driver 0 0 0 2012-01-25 Vasily Khoruzhick marex New
[U-Boot,v2,5/5] serial: pl01x: avoid pl01x type check two times 1 0 0 2014-11-21 Vikas Manocha New
[U-Boot,v2,4/5] serial: pl01x: disable as per type of pl01x 1 0 0 2014-11-21 Vikas Manocha New
[U-Boot,v2,3/5] serial: pl01x: move all line control at same place 1 0 0 2014-11-21 Vikas Manocha New
[U-Boot,v2,2/5] serial: pl01x: fix pl011 baud rate configuration 1 0 0 2014-11-21 Vikas Manocha New
[U-Boot,v2,1/5] serial: pl01x: pass pl01x_type to set baudrate 1 0 0 2014-11-21 Vikas Manocha New
[U-Boot,v5,3/3] stv0991: enable default and misc command configs 0 0 0 2014-11-18 Vikas Manocha New
[U-Boot,v5,2/3] stv0991: enable ethernet support 0 0 0 2014-11-18 Vikas Manocha New
[U-Boot,v5,1/3] stv0991: Add basic stv0991 architecture support 0 0 0 2014-11-18 Vikas Manocha New
[U-Boot,v4,4/4] stv0991: add maintainer information 0 0 0 2014-11-18 Vikas Manocha aaribaud New
[U-Boot,v4,3/4] stv0991: default + misc command configs enabled 0 0 0 2014-11-18 Vikas Manocha aaribaud New
[U-Boot,v4,2/4] stv0991: enable ethernet support 0 0 0 2014-11-18 Vikas Manocha aaribaud New
[U-Boot,v4,1/4] stv0991: Add basic stv0991 architecture support 0 0 0 2014-11-18 Vikas Manocha aaribaud New
[U-Boot,5/5] serial: pl01x: avoid pl01x type check two times 1 0 0 2014-11-18 Vikas Manocha trini New
[U-Boot,4/5] serial: pl01x: disable as per type of pl01x 1 0 0 2014-11-18 Vikas Manocha trini New
[U-Boot,3/5] serial: pl01x: move all line control at same place 1 0 0 2014-11-18 Vikas Manocha trini New
[U-Boot,2/5] serial: pl01x: fix pl011 baud rate configuration 1 0 0 2014-11-18 Vikas Manocha trini New
[U-Boot,1/5] serial: pl01x: pass pl01x_type to set baudrate 1 0 0 2014-11-18 Vikas Manocha trini New
[U-Boot,v2,7/7] mtd/st_smi: Add mtd support for smi 1 0 0 2012-12-06 Vipin Kumar hs New
[U-Boot,v2,6/7] mtd/st_smi: Use page sizes respective to flash 1 0 0 2012-12-06 Vipin Kumar hs New
[U-Boot,v2,5/7] mtd/st_smi: Write to flash in a tight loop 1 0 0 2012-12-06 Vipin Kumar hs New
[U-Boot,v2,4/7] mtd/st_smi: Avoid issuing multiple WE commands 1 0 0 2012-12-06 Vipin Kumar hs New
[U-Boot,v2,3/7] mtd/st_smi: Add support for Micron N25Q128 Flash 1 0 0 2012-12-06 Vipin Kumar hs New
[U-Boot,v2,2/7] mtd/st_smi: Rearrange the supported devices in alphabetical order 1 0 0 2012-12-06 Vipin Kumar hs New
[U-Boot,v2,1/7] mtd/st_smi: Clear error flags while initiating a fresh write 1 0 0 2012-12-06 Vipin Kumar hs New
[U-Boot,SPEAr,Fixes,11/11] spear3xx: FIX: Enable access to memory for spear310 and spear320 0 0 0 2012-11-02 Vipin Kumar vipink New
[U-Boot,SPEAr,Fixes,10/11] spear: Enable ehci support 0 0 0 2012-11-02 Vipin Kumar vipink New
[U-Boot,SPEAr,Fixes,09/11] spear: Add POST memory support 0 0 0 2012-11-02 Vipin Kumar vipink New
[U-Boot,SPEAr,Enhancement,9/9] spear300evb: Add SPL support 0 0 0 2012-11-02 Vipin Kumar vipink New
[U-Boot,SPEAr,Fixes,08/11] spear/spl: Cleanup spear SPL 0 0 0 2012-11-02 Vipin Kumar vipink New
[U-Boot,SPEAr,Enhancement,8/9] spear/spl: Add support to boot from Parallel NOR device 0 0 0 2012-11-02 Vipin Kumar vipink New
[U-Boot,SPEAr,Fixes,07/11] spear: Cleanup SoC area 0 0 0 2012-11-02 Vipin Kumar vipink New
[U-Boot,SPEAr,Enhancement,7/9] spear6xx/spear3xx: Add support to boot via NAND device 0 0 0 2012-11-02 Vipin Kumar vipink New
[U-Boot,SPEAr13xx,7/7] spear1310evb: Add SPL support 0 0 0 2012-11-02 Vipin Kumar vipink New
[U-Boot,SPEAr,Fixes,06/11] spear: Read ethaddr from I2C memory 0 0 0 2012-11-02 Vipin Kumar vipink New
[U-Boot,SPEAr,Enhancement,6/9] spear320-hmi: Add support for hmi machine 0 0 0 2012-11-02 Vipin Kumar vipink New
[U-Boot,SPEAr13xx,6/7] spear1340evb: Add SPL support 0 0 0 2012-11-02 Vipin Kumar vipink New
[U-Boot,SPEAr,Fixes,05/11] spear: Append MISC_ as prefix to misc register bitmasks 0 0 0 2012-11-02 Vipin Kumar vipink New
[U-Boot,SPEAr,Enhancement,5/9] spear320: Add support for SD/MMC 0 0 0 2012-11-02 Vipin Kumar vipink New
[U-Boot,SPEAr13xx,5/7] spear1340lcad: Add support for LCAD machine 0 0 0 2012-11-02 Vipin Kumar vipink New
[U-Boot,SPEAr,Enhancement,4/9] spear/configs: Modify several configurations 0 0 0 2012-11-02 Vipin Kumar vipink New
[U-Boot,SPEAr,Fixes,04/11] spear/board: Cleanup spear related board files 0 0 0 2012-11-02 Vipin Kumar vipink New
[U-Boot,SPEAr13xx,4/7] spear1310evb: Add support for evb machine 0 0 0 2012-11-02 Vipin Kumar vipink New
[U-Boot,SPEAr,Fixes,03/11] spear/include: Clean up the spear include files 0 0 0 2012-11-02 Vipin Kumar vipink New
[U-Boot,SPEAr,Enhancement,3/9] spear320plc: Correct the MACB interface 0 0 0 2012-11-02 Vipin Kumar vipink New
[U-Boot,SPEAr13xx,3/7] spear1340evb: Add support for evb machine 0 0 0 2012-11-02 Vipin Kumar vipink New
[U-Boot,SPEAr,Fixes,02/11] spear/configs: Split config files hierarchically into plat, arch, soc and board 0 0 0 2012-11-02 Vipin Kumar vipink New
[U-Boot,SPEAr,Enhancement,2/9] spear3xx: Add pinmux support 0 0 0 2012-11-02 Vipin Kumar vipink New
[U-Boot,SPEAr13xx,2/7] spear1310: Add support for spear1310 SoC 0 0 0 2012-11-02 Vipin Kumar vipink New
[U-Boot,SPEAr,Fixes,01/11] SPEAr: Remove extra spear board configurations 0 0 0 2012-11-02 Vipin Kumar vipink New
[U-Boot,SPEAr,Enhancement,1/9] spear: Add cache support 0 0 0 2012-11-02 Vipin Kumar vipink New
[U-Boot,SPEAr13xx,1/7] spear1340: Add support for spear1340 SoC 0 0 0 2012-11-02 Vipin Kumar vipink New
[U-Boot] powerpc: mpc52xx: PULL REQUEST 0 0 0 2014-11-19 Wolfgang Denk New
[U-Boot,2/3] common/memsize.c: correctly restore all modified memory loations 0 0 0 2014-10-21 Wolfgang Denk trini New
[U-Boot,1/3] common/memsize.c: Coding style cleanup 0 0 0 2014-10-21 Wolfgang Denk trini New
[U-Boot,V4,09/13] ARM: tegra: use clrsetbits_le32 in pinmux driver 0 0 0 2014-03-25 Wolfgang Denk tomcwarren New
[U-Boot,6/6] ARM: at91: at91sam9x5: mmc: save environment as a file in FAT partition. 0 0 0 2014-11-19 Wu, Josh New
[U-Boot,5/6] ARM: at91: sama5: move the bootcmd definition to the common header 0 0 0 2014-11-19 Wu, Josh New
[U-Boot,4/6] ARM: at91: sama5d3: mmc: save enviroment as a fat file (uboot.env) 0 0 0 2014-11-19 Wu, Josh New
[U-Boot,3/6] ARM: at91: sama5d3_xplained: set ENV_FAT_DEVICE_AND_PART intead of using number 0 0 0 2014-11-19 Wu, Josh New