Show patches with: State = Action Required       |    Archived = No       |   863 patches
« 1 2 3 48 9 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
pinctrl: single: add support for pinctrl-single, pins when #pinctrl-cells = 2 pinctrl: single: add support for pinctrl-single, pins when #pinctrl-cells = 2 - - - - --- 2021-11-26 AJ Bagwell trini New
[RFC,3/3] usb: ehci-omap: Enable phy drivers to enable/reset phy [RFC,1/3] usb: ehci-omap: Remove dead code - - - - --- 2021-10-04 Adam Ford marex New
[RFC,2/3] phy: nop-phy: Enable reset-gpios support [RFC,1/3] usb: ehci-omap: Remove dead code - - - - --- 2021-10-04 Adam Ford marex New
[RFC,1/3] usb: ehci-omap: Remove dead code [RFC,1/3] usb: ehci-omap: Remove dead code - - - - --- 2021-10-04 Adam Ford marex New
[V2,6/6] ARM: rmobile: Rename r8a774a1_beacon_defconfig to rzg2_beacon_defconfig [V2,1/6] ARM: rmobile: Enable board detection when FIT is enabled - - - - --- 2021-09-20 Adam Ford marex New
[V2,3/6] ARM: rmobile: beacon: Remove duplicated for RZ/G2 M/N/H [V2,1/6] ARM: rmobile: Enable board detection when FIT is enabled - - - - --- 2021-09-20 Adam Ford marex New
imx8mn_beacon: Fix booting hang and switch to binman imx8mn_beacon: Fix booting hang and switch to binman - - 2 - --- 2021-09-10 Adam Ford sbabic New
imx8mm_beacon: Switch to binman for generating image imx8mm_beacon: Switch to binman for generating image - - 1 - --- 2021-09-09 Adam Ford sbabic Under Review
[2/2] arm: rmobile: Remove duplicate code from beacon-rzg2m and hihope-rzg2 [1/2] arm: mach-rmobile: Move cpu_reset to rzg2-reset.c - - - - --- 2021-08-27 Adam Ford marex New
[1/2] arm: mach-rmobile: Move cpu_reset to rzg2-reset.c [1/2] arm: mach-rmobile: Move cpu_reset to rzg2-reset.c - - - - --- 2021-08-27 Adam Ford marex New
[V2,2/2] ARM: dts: rmobile: beacon-renesom: Enable Ethernet [V2,1/2] ARM: dts: rmobile: beacon-renesom: Enable USB and ethernet ref clocks - - - - --- 2021-08-24 Adam Ford marex New
[V2,1/2] ARM: dts: rmobile: beacon-renesom: Enable USB and ethernet ref clocks [V2,1/2] ARM: dts: rmobile: beacon-renesom: Enable USB and ethernet ref clocks - - - - --- 2021-08-24 Adam Ford marex New
[V2] ARM: rmobile: beacon-renesom: Enable QSPI NOR Flash [V2] ARM: rmobile: beacon-renesom: Enable QSPI NOR Flash - - 1 - --- 2021-06-03 Adam Ford marex New
spi: renesas_rpc_spi: Fix fallback compatibility string spi: renesas_rpc_spi: Fix fallback compatibility string - 1 - - --- 2021-01-04 Adam Ford marex New
test/py:Update python tests for ‘gpio’ cmd test/py:Update python tests for ‘gpio’ cmd - - - - --- 2021-05-31 Adarsh Babu Kalepalli trini New
[v5,2/2] firmware: zynqmp: return status in EL2 from xilinx_pm_request. [v5,1/2] firmware: zynqmp: fix write to an uninitialised pointer in xilinx_pm_request - - - - --- 2021-10-14 Adrian Fiergolski monstr New
[v5,1/2] firmware: zynqmp: fix write to an uninitialised pointer in xilinx_pm_request [v5,1/2] firmware: zynqmp: fix write to an uninitialised pointer in xilinx_pm_request - - - - --- 2021-10-14 Adrian Fiergolski monstr New
[ZynqMP] Writing correct value to ANALOG_BUS. [ZynqMP] Writing correct value to ANALOG_BUS. - - - - --- 2021-06-07 Adrian Fiergolski monstr New
[18/18] km/ls102xa: use unused scratchrw4 address for post word Untitled series #272289 - - - - --- 2021-11-16 Aleksandar Gerasimovski priyankajain New
[17/18] configs/expu1/seli8: limit autoboot stop to space key Untitled series #272289 - - - - --- 2021-11-16 Aleksandar Gerasimovski priyankajain New
[16/18] arm/expu1/seli8: adapt dts NOR partition table to the latest used Untitled series #272289 - - - - --- 2021-11-16 Aleksandar Gerasimovski priyankajain New
[15/18] configs/expu1: add u-boot update defconfig Untitled series #272289 - - - - --- 2021-11-16 Aleksandar Gerasimovski priyankajain New
[14/18] configs/expu1: enable field fail-safe u-boot update Untitled series #272289 - - - - --- 2021-11-16 Aleksandar Gerasimovski priyankajain New
[13/18] configs: expu1: enable ver envvar for version_string Untitled series #272289 - - - - --- 2021-11-16 Aleksandar Gerasimovski priyankajain New
[12/18] configs: seli8: enable ver envvar for version_string [01/18] arm: ls1021a: limit debug eth phy speed to 100Mbps - - - - --- 2021-11-16 Aleksandar Gerasimovski priyankajain New
[11/18] km/ls102xa: fix device disable configuration [01/18] arm: ls1021a: limit debug eth phy speed to 100Mbps - - - - --- 2021-11-16 Aleksandar Gerasimovski priyankajain New
[10/18] configs/seli8: add u-boot update defconfig [01/18] arm: ls1021a: limit debug eth phy speed to 100Mbps - - - - --- 2021-11-16 Aleksandar Gerasimovski priyankajain New
[09/18] configs/seli8: enable field fail-safe u-boot update [01/18] arm: ls1021a: limit debug eth phy speed to 100Mbps - - - - --- 2021-11-16 Aleksandar Gerasimovski priyankajain New
[08/18] km/ls102xa: add support for field fail-safe u-boot [01/18] arm: ls1021a: limit debug eth phy speed to 100Mbps - - - - --- 2021-11-16 Aleksandar Gerasimovski priyankajain New
[07/18] km: common: implement field fail-safe u-boot update [01/18] arm: ls1021a: limit debug eth phy speed to 100Mbps - - - - --- 2021-11-16 Aleksandar Gerasimovski priyankajain New
[06/18] km: qrio: add access functions for ebootcount [01/18] arm: ls1021a: limit debug eth phy speed to 100Mbps - - - - --- 2021-11-16 Aleksandar Gerasimovski priyankajain New
[05/18] km/ls102xa: dbg phy prst depends on piggy presence [01/18] arm: ls1021a: limit debug eth phy speed to 100Mbps - - - - --- 2021-11-16 Aleksandar Gerasimovski priyankajain New
[04/18] km: qrio: add function to read PGY_PRES pin status [01/18] arm: ls1021a: limit debug eth phy speed to 100Mbps - - - - --- 2021-11-16 Aleksandar Gerasimovski priyankajain New
[03/18] km/ls102xa: use qrio selftest_pin for reading selftest [01/18] arm: ls1021a: limit debug eth phy speed to 100Mbps - - - - --- 2021-11-16 Aleksandar Gerasimovski priyankajain New
[02/18] km: qrio: add function to read SLFTEST pin status [01/18] arm: ls1021a: limit debug eth phy speed to 100Mbps - - - - --- 2021-11-16 Aleksandar Gerasimovski priyankajain New
[01/18] arm: ls1021a: limit debug eth phy speed to 100Mbps [01/18] arm: ls1021a: limit debug eth phy speed to 100Mbps - - - - --- 2021-11-16 Aleksandar Gerasimovski priyankajain New
arm: bootm: wrong lmb region reservation when PRAM is used arm: bootm: wrong lmb region reservation when PRAM is used - - - - --- 2021-02-19 Aleksandar Gerasimovski trini Needs Review / ACK
[v3,13/13] ARM: dts: stm32mp: dts: Don't remove OPTEE nodes for DK2 boards stm32mp1: Support falcon mode with OP-TEE payloads - - - - --- 2021-10-08 Alex G. pchotard New
[v3,12/13] stm32mp1: spl: Copy optee nodes to target FDT for OP-TEE payloads stm32mp1: Support falcon mode with OP-TEE payloads - - - - --- 2021-10-08 Alex G. pchotard New
[v3,11/13] ARM: dts: stm32mp: Add OP-TEE "/firmware" node to SPL dtb stm32mp1: Support falcon mode with OP-TEE payloads - - - - --- 2021-10-08 Alex G. pchotard New
[v3,10/13] lib: Makefile: Make optee library available in SPL stm32mp1: Support falcon mode with OP-TEE payloads - - - - --- 2021-10-08 Alex G. pchotard New
[v3,09/13] stm32mp1: spl: Configure MAC address when booting OP-TEE stm32mp1: Support falcon mode with OP-TEE payloads - - - - --- 2021-10-08 Alex G. pchotard New
[v3,08/13] arm: stm32mp: Factor out reading MAC address from OTP stm32mp1: Support falcon mode with OP-TEE payloads - - - - --- 2021-10-08 Alex G. pchotard New
[v3,07/13] arm: stm32mp: bsec: Update OTP shadow registers in SPL stm32mp1: Support falcon mode with OP-TEE payloads - - - - --- 2021-10-08 Alex G. pchotard New
[v3,06/13] fdt_support: Implement fdt_ethernet_set_macaddr() stm32mp1: Support falcon mode with OP-TEE payloads - - - - --- 2021-10-08 Alex G. pchotard New
[v3,05/13] board: stm32mp1: Implement board_fit_config_name_match() for SPL stm32mp1: Support falcon mode with OP-TEE payloads - - - - --- 2021-10-08 Alex G. pchotard New
[v3,04/13] stm32mp1: Add support for falcon mode boot from SD card stm32mp1: Support falcon mode with OP-TEE payloads - - - - --- 2021-10-08 Alex G. pchotard New
[v3,03/13] stm32mp1: Add support for baudrates higher than 115200 stm32mp1: Support falcon mode with OP-TEE payloads - - 1 - --- 2021-10-08 Alex G. pchotard New
[v3,02/13] spl: Move SYS_MMCSD_RAW_MODE_KERNEL_SECTOR to Kconfig stm32mp1: Support falcon mode with OP-TEE payloads - - - - --- 2021-10-08 Alex G. pchotard New
[v3,01/13] spl: Untagle spl_start_uboot() from spl_mmc.c stm32mp1: Support falcon mode with OP-TEE payloads - - - - --- 2021-10-08 Alex G. pchotard New
[3/3] stm32mp1: Replace STM32MP15x_STM32IMAGE with TFABOOT_FIP_CONTAINER stm32mp: Attempt to resolve unintended breakage with v2021.10-rc2 - - - - --- 2021-09-09 Alex G. pchotard New
[2/3] arm: Kconfig: Introduce a TFABOOT_FIP_CONTAINER option stm32mp: Attempt to resolve unintended breakage with v2021.10-rc2 - - - - --- 2021-09-09 Alex G. pchotard New
[1/3] stm32mp: Rename FIP config to stm32mp15_tfaboot_fip_defconig stm32mp: Attempt to resolve unintended breakage with v2021.10-rc2 - - - - --- 2021-09-09 Alex G. pchotard New
[4/4] rockchip: rk3399: Add support for chromebook_kevin rockchip: Improve support for Bob chromebook and add support for Kevin - - - - --- 2021-11-25 Alper Nebi Yasak kevery New
[3/4] rockchip: bob: Enable more configs rockchip: Improve support for Bob chromebook and add support for Kevin - - - - --- 2021-11-25 Alper Nebi Yasak kevery New
[2/4] rockchip: gru: Add more devicetree settings rockchip: Improve support for Bob chromebook and add support for Kevin - - - - --- 2021-11-25 Alper Nebi Yasak kevery New
[1/4] rockchip: gru: Set up SoC IO domain registers rockchip: Improve support for Bob chromebook and add support for Kevin - - - - --- 2021-11-25 Alper Nebi Yasak kevery New
[3/3] rockchip: sdhci: Add HS400 Enhanced Strobe support for RK3568 rockchip: sdhci: Add HS400 Enhanced Strobe support - - 1 - --- 2021-11-01 Alper Nebi Yasak kevery New
[2/3] rockchip: sdhci: Add HS400 Enhanced Strobe support for RK3399 rockchip: sdhci: Add HS400 Enhanced Strobe support - - 1 - --- 2021-11-01 Alper Nebi Yasak kevery New
[1/3] mmc: sdhci: Add HS400 Enhanced Strobe support rockchip: sdhci: Add HS400 Enhanced Strobe support - - 1 - --- 2021-11-01 Alper Nebi Yasak kevery New
board: freescale: lx2160a: fix out of bounds write board: freescale: lx2160a: fix out of bounds write - - - - --- 2021-09-02 Aluchenesei Cosmin-florin priyankajain Under Review
[v4,6/6] configs: Enable mmc support Add MMC/SD support for S700/S900 - - - - --- 2021-11-28 Amit Singh Tomar trini New
[v4,5/6] mmc: actions: add MMC driver for Actions OWL S700/S900 Add MMC/SD support for S700/S900 - - - - --- 2021-11-28 Amit Singh Tomar trini New
[v4,4/6] ARM: dts: s700: add MMC/SD controller node Add MMC/SD support for S700/S900 - - - - --- 2021-11-28 Amit Singh Tomar trini New
[v4,3/6] ARM: dts: sync Actions Semi S700 DT from Linux 5.10-rc7 Add MMC/SD support for S700/S900 - - - - --- 2021-11-28 Amit Singh Tomar trini New
[v4,2/6] clk: actions: Add SD/MMC clocks Add MMC/SD support for S700/S900 - - - - --- 2021-11-28 Amit Singh Tomar trini Needs Review / ACK
[v4,1/6] clk: actions: Introduce dummy get/set_rate callbacks Add MMC/SD support for S700/S900 - - - - --- 2021-11-28 Amit Singh Tomar trini Needs Review / ACK
[v2] cmd: pxe_utils: sysboot: add label override support [v2] cmd: pxe_utils: sysboot: add label override support - - 1 - --- 2021-11-13 Amjad Ouled-Ameur trini New
board: ti: am335x: Choose CPSW or PRUSS configuration based on jumper setting board: ti: am335x: Choose CPSW or PRUSS configuration based on jumper setting - - 1 - --- 2021-10-29 Amjad Ouled-Ameur trini New
sunxi: Remove misleading USB-OTG charger message sunxi: Remove misleading USB-OTG charger message - - - - --- 2021-11-04 Andre Przywara apritzel New
[RESEND,v2,3/3] sunxi: defconfig: enable eMMC boot partition support sunxi: Improve automatic eMMC boot partition support - - - - --- 2021-07-12 Andre Przywara apritzel New
[RESEND,v2,2/3] sunxi: eMMC: Improve automatic boot source detection sunxi: Improve automatic eMMC boot partition support - - - - --- 2021-07-12 Andre Przywara apritzel New
[RESEND,v2,1/3] spl: mmc: extend spl_mmc_boot_mode() to take mmc argument sunxi: Improve automatic eMMC boot partition support 1 - 3 - --- 2021-07-12 Andre Przywara apritzel New
cmd: ums: Enable by default for sunxi cmd: ums: Enable by default for sunxi - - - - --- 2021-07-05 Andre Przywara apritzel New
[3/3] sunxi: OrangePi Zero 2: Enable SPI booting sunxi: H616: SPI boot support - - 1 - --- 2021-07-05 Andre Przywara apritzel New
[2/3] sunxi: SPL SPI: Add SPI boot support for the Allwinner H616 SoC sunxi: H616: SPI boot support - - 1 - --- 2021-07-05 Andre Przywara apritzel New
[RFC,3/3] sunxi: Drop sunxi FASTBOOT_FLASH_MMC_DEV defaults fastboot: sunxi: Determine MMC device at runtime - - - - --- 2021-05-24 Andre Przywara apritzel New
[RFC,2/3] sunxi: Implement fastboot_get_mmc_device() fastboot: sunxi: Determine MMC device at runtime - - - - --- 2021-05-24 Andre Przywara apritzel New
[RFC,1/3] fastboot: Allow runtime determination of MMC device fastboot: sunxi: Determine MMC device at runtime - - - - --- 2021-05-24 Andre Przywara apritzel New
usb: musb-new: Extend Allwinner quirk to newer SoCs usb: musb-new: Extend Allwinner quirk to newer SoCs - - - - --- 2021-04-27 Andre Przywara marex New
[v2,6/6] net: sun8i-emac: v3s: fix soft reset timeout Untitled series #245259 - - - - --- 2021-05-22 Andreas Rehn apritzel New
[v2,4/6] net: sun8i-emac: add v3s variant Untitled series #245186 - - - - --- 2021-05-21 Andreas Rehn apritzel New
[v2,3/6] clk: sunxi: v3s: fix tabs / spaces Untitled series #245186 - - - - --- 2021-05-21 Andreas Rehn apritzel New
[1/6] dts: sunxi: add licheepi-zero-dock arm: sunxi: v3s: add ethernet support - - - - --- 2021-05-19 Andreas Rehn apritzel New
board: ast2500/ast2600: initialize LEDs board: ast2500/ast2600: initialize LEDs - - - - --- 2021-11-23 Andrei Kartashev trini New
[v2,2/2] binman: Use less hard coded magic when inserting new PATH [v2,1/2] binman: Do not pollute source tree when build with `make O=...` - - - - --- 2021-11-30 Andy Shevchenko New
[v2,1/2] binman: Do not pollute source tree when build with `make O=...` [v2,1/2] binman: Do not pollute source tree when build with `make O=...` - - - - --- 2021-11-30 Andy Shevchenko New
[v1,1/1] binman: Do not pollute source tree when build with `make O=...` [v1,1/1] binman: Do not pollute source tree when build with `make O=...` - - - - --- 2021-11-30 Andy Shevchenko New
[v1,1/1] tools/netconsole: Add support for socat [v1,1/1] tools/netconsole: Add support for socat - - - 1 --- 2021-11-17 Andy Shevchenko rfried New
[v1,2/2] x86: scu: Add a few debug messages to the driver [v1,1/2] hexdump: Introduce debug APIs - - 1 - --- 2021-11-09 Andy Shevchenko trini New
[v1,1/2] hexdump: Introduce debug APIs [v1,1/2] hexdump: Introduce debug APIs - - - - --- 2021-11-09 Andy Shevchenko trini New
[v1,1/1] Makefile.lib: Always rebuild DSDT [v1,1/1] Makefile.lib: Always rebuild DSDT - - - - --- 2021-10-20 Andy Shevchenko bmeng New
[2/2] sunxi: fix non working console on uart2 [1/2] sunxi: add H2+ config option - - - - --- 2021-10-09 Angelo Dureghello apritzel New
[2/2] cmd: fuse: Add a command to read fuses to memory [1/2] cmd: fuse: add a fuse comparison function - - - - --- 2021-11-28 Angus Ainslie sbabic New
[1/2] cmd: fuse: add a fuse comparison function [1/2] cmd: fuse: add a fuse comparison function - - - - --- 2021-11-28 Angus Ainslie sbabic New
drivers: spi-nor: Add JEDEC id for W25Q16JV drivers: spi-nor: Add JEDEC id for W25Q16JV - - - - --- 2021-11-28 Angus Ainslie jagan New
mxc_gpio: on imx8m read the DR instead of the PSR mxc_gpio: on imx8m read the DR instead of the PSR - - - - --- 2021-11-28 Angus Ainslie sbabic New
[v2,2/2] bsh: imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boards imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boards - - - - --- 2021-11-23 Ariel D'Alessandro sbabic New
[v2,1/2] imx8m: add regs used by GPMI imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boards - - - - --- 2021-11-23 Ariel D'Alessandro sbabic New
[v6,1/1] imx8mn_var_som: Add support for Variscite VAR-SOM-MX8M-NANO board imx8mn_var_som: Add support for Variscite VAR-SOM-MX8M-NANO board - - 2 - --- 2021-11-23 Ariel D'Alessandro sbabic New
« 1 2 3 48 9 »