| [U-Boot,v4,8/9] main: Add debug_parser() to avoid #ifdefs |
2013-05-15 |
Simon Glass |
trini |
New |
| [U-Boot,v4,9/9] main: Add debug_bootkeys to avoid #ifdefs |
2013-05-15 |
Simon Glass |
trini |
New |
| [U-Boot,v4] common/Makefile: Add new symbol CONFIG_SPL_ENV_xxx for environment in SPL |
2013-05-16 |
ying.zhang@freescale.com |
trini |
New |
| [U-Boot] README: Correct reference for CONFIG_SUPPORT_RAW_INITRD |
2013-05-16 |
Tom Rini |
trini |
New |
| [U-Boot,03/10] ARM: highbank: update config options |
2013-05-15 |
Rob Herring |
aaribaud |
New |
| [U-Boot,04/10] ARM: highbank: fix get_tbclk value to timer rate |
2013-05-15 |
Rob Herring |
aaribaud |
New |
| [U-Boot,06/10] ARM: highbank: avoid bss write in timer_init |
2013-05-15 |
Rob Herring |
aaribaud |
New |
| [U-Boot,07/10] ARM: highbank: enable reset on command timeout |
2013-05-15 |
Rob Herring |
aaribaud |
New |
| [U-Boot,08/10] ARM: highbank: setup peripherals based on power domain status |
2013-05-15 |
Rob Herring |
aaribaud |
New |
| [U-Boot,09/10] ARM: highbank: fix build with CONFIG_MISC_INIT_R turned off |
2013-05-15 |
Rob Herring |
aaribaud |
New |
| [U-Boot,10/10] highbank: enable keyed autoboot stop |
2013-05-15 |
Rob Herring |
aaribaud |
New |
| [U-Boot,v3,1/4] mx31pdk: copy SPL directly, not using relocate_code. |
2013-05-16 |
Albert ARIBAUD |
aaribaud |
New |
| [U-Boot,v3,2/4] tx25: copy SPL directly, not using relocate_code. |
2013-05-16 |
Albert ARIBAUD |
aaribaud |
New |
| [U-Boot,v3,3/4] arm: do not compile relocate_code() for SPL builds |
2013-05-16 |
Albert ARIBAUD |
aaribaud |
New |
| [U-Boot,v3,4/4] arm: factorize relocate_code routine |
2013-05-16 |
Albert ARIBAUD |
aaribaud |
New |
| [U-Boot] sandbox: block driver using host file/device as backing store |
2013-05-14 |
Henrik Nordström |
sjg |
New |
| [U-Boot,OMAP-ULPI] This patch fix the omap access to the tranceiver configuration registers using the ulpi bus. |
2013-05-17 |
Michael Trimarchi |
marex |
New |
| [U-Boot,v2] mmc: fix env in mmc with redundant compile error |
2013-05-15 |
Bo Shen |
afleming |
New |
| [U-Boot,v9,2/5] usb: ehci: add weak-aliased function for PORTSC |
2013-05-15 |
Kuo-Jung Su |
marex |
New |
| [U-Boot,v9,3/5] usb: hub: make minimum power-on delay configurable |
2013-05-15 |
Kuo-Jung Su |
marex |
New |
| [U-Boot,v6] Add support for Congatec Conga-QEVAl board |
2013-05-16 |
SARTRE Leo |
sbabic |
New |
| [U-Boot,v3,01/10] bootstage: Introduce sub-IDs for use with image loading |
2013-05-16 |
Simon Glass |
trini |
New |
| [U-Boot,v3,06/10] sandbox: Adjust bootm command to work with sandbox |
2013-05-16 |
Simon Glass |
trini |
New |
| [U-Boot,v3,09/10] bootstage: Remove unused entries related to kernel/ramdisk/fdt load |
2013-05-16 |
Simon Glass |
trini |
New |
| [U-Boot,2/4,V5] EXYNOS5: FDT: Add serial device node values |
2013-05-17 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,1/2,V2] EXYNOS: Export timer_get_us() to get microsecond timer |
2013-05-17 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,2/2,V2] EXYNOS: SPI: Support a delay after deactivate |
2013-05-17 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,v4,3/4] arm: do not compile relocate_code() for SPL builds |
2013-05-19 |
Albert ARIBAUD |
aaribaud |
New |
| [U-Boot,v4,4/4] arm: factorize relocate_code routine |
2013-05-19 |
Albert ARIBAUD |
aaribaud |
New |
| [U-Boot,1/6] powerpc/mpc85xx: support application without resetvec segment in the linker script |
2013-05-20 |
ying.zhang@freescale.com |
afleming |
New |
| [U-Boot,3/6] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL |
2013-05-20 |
ying.zhang@freescale.com |
afleming |
New |
| [U-Boot,4/6] Makefile: move the common makefile line to public area |
2013-05-20 |
ying.zhang@freescale.com |
afleming |
New |
| [U-Boot,V2,OMAP-ULPI] : This patch fix the omap access to the transceiver configuration registers using the ulpi bus. |
2013-05-20 |
Michael Trimarchi |
trini |
New |
| [U-Boot,v03,2/2] OMAP5: add ABB setup for MPU voltage domain |
2013-05-21 |
Andrii Tseglytskyi |
trini |
New |
| [U-Boot,v3,2/6] arm: mvf600: Add IOMUX support for Vybrid MVF600 |
2013-05-21 |
Alison Wang |
aaribaud |
New |
| [U-Boot,V2] drivers:power:max77686: add function to set voltage and mode |
2013-05-21 |
Piotr Wilczek |
prom |
New |
| [U-Boot,v2] ARM: highbank: setup peripherals based on power domain status |
2013-05-21 |
Rob Herring |
aaribaud |
New |
| [U-Boot,v2,batch,4,09/29] powerpc/T4160: Merge T4160 and T4240 in config_mpc85xx.h |
2013-03-25 |
York Sun |
afleming |
New |
| [U-Boot,1/7] ahci: use ports implemented map instead of num_ports |
2013-05-21 |
Rob Herring |
trini |
New |
| [U-Boot,V3,4/4] ARM: tegra: make use of negative ENV_OFFSET on NVIDIA boards |
2013-05-23 |
Stephen Warren |
afleming |
New |
| [U-Boot,V3,2/4] mmc: report capacity for the selected partition |
2013-05-23 |
Stephen Warren |
afleming |
New |
| [U-Boot] board/bsc9131rdb: Add targets for Sysclk 100MHz |
2013-04-01 |
Priyanka Jain |
afleming |
New |
| [U-Boot] da830: add MMC support |
2013-05-24 |
Vishwanathrao Badarkhe, Manish |
trini |
New |
| [U-Boot] drivers:video:s6e8ax0: change data_to_send array to static |
2013-05-24 |
Piotr Wilczek |
ag |
New |
| [U-Boot,V3,2/3] i2c:multi_i2c: add new macros I2C_7 and I2C_8 |
2013-05-24 |
Piotr Wilczek |
prom |
New |
| [U-Boot,5/6] spl: Make CONFIG_SPL_BUILD contain more functionality |
2013-05-20 |
ying.zhang@freescale.com |
afleming |
New |
| [U-Boot,v2] ARM: highbank: update config options |
2013-05-21 |
Rob Herring |
aaribaud |
New |
| [U-Boot,v2] ARM: move interrupt_init to before relocation |
2013-05-21 |
Rob Herring |
aaribaud |
New |
| [U-Boot,v03,1/2] OMAP3+: introduce generic ABB support |
2013-05-21 |
Andrii Tseglytskyi |
trini |
New |
| [U-Boot,U-BOOT] mmc: sdhci: Enable 8-bit bus width only for 3.0 spec onwards |
2013-05-21 |
Jagannadha Sutradharudu Teki |
trini |
New |
| [U-Boot] common: board_f: Do not call board_postclk_init twice |
2013-05-22 |
Masahiro Yamada |
trini |
New |
| [U-Boot] input: fix unaligned access in key_matrix_decode_fdt() |
2013-05-22 |
Stephen Warren |
trini |
New |
| [U-Boot] input: simplify key_matrix_decode_fdt() |
2013-05-23 |
Stephen Warren |
trini |
New |
| [U-Boot,V3,1/3] power:battery: add battery support for Trats2 board |
2013-05-24 |
Piotr Wilczek |
prom |
New |
| [U-Boot,1/2,V4] SPI: Add support for preamble bytes |
2013-05-24 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,2/2,V4] EXYNOS: SPI: Support SPI_PREAMBLE mode |
2013-05-24 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot] drivers:lcd: fix unaligned access on lcd |
2013-05-24 |
Piotr Wilczek |
ag |
New |
| [U-Boot] da830: add MMC support |
2013-05-22 |
Vishwanathrao Badarkhe, Manish |
trini |
New |
| [U-Boot] arm: pxa: PXA270 D-Cache as ram |
2013-05-20 |
Sergey Yanovich |
marex |
New |
| [U-Boot] arm: pxa: config option for PXA270 turbo mode |
2013-05-21 |
Sergey Yanovich |
marex |
New |
| [U-Boot] arm: pxa: config option for PXA270 turbo mode |
2013-05-21 |
Sergey Yanovich |
marex |
New |
| [U-Boot,V3,1/4] README: document CONFIG_ENV_IS_IN_MMC |
2013-05-23 |
Stephen Warren |
afleming |
New |
| [U-Boot,V3,3/4] env_mmc: allow negative CONFIG_ENV_OFFSET |
2013-05-23 |
Stephen Warren |
afleming |
New |
| [U-Boot,2/6] powerpc/mpc85xx: modify the functionality clear_bss and the end address of the BSS |
2013-05-20 |
ying.zhang@freescale.com |
afleming |
New |
| [U-Boot,1/5] arch/powerpc/cpu/mpc8xxx: PAMU driver support |
2013-05-22 |
Andy Fleming |
afleming |
New |
| [U-Boot,6/6] powerpc/p1022ds: boot from SD Card with SPL |
2013-05-23 |
Zhang Ying-B40530 |
afleming |
New |
| [U-Boot] ppc: ppmc7xx: Fix possible out-of-bound access |
2013-05-20 |
Marek Vasut |
wd |
New |
| [U-Boot,v4,03/10] i2c, soft-i2c: switch to new multibus/multiadapter support |
2013-05-18 |
Heiko Schocher |
hs |
New |
| [U-Boot,v2] OMAP4/5: I2C: New read, write and probe functions |
2013-05-24 |
Lubomir Popov |
|
New |
| [U-Boot] usb: ehci: add missing cache managment |
2013-05-24 |
Stephen Warren |
|
New |
| [U-Boot,U-BOOT,1/1] smdk2410:coding style cleanup |
2011-05-30 |
Peter Kong |
prom |
Under Review |
| [U-Boot] S5P: adds s6e63m0 amoled display driver |
2010-09-14 |
Donghwa Lee |
ag |
Under Review |
| [U-Boot] at91rm9200ek.h: explicitly disable D-Cache |
2011-08-31 |
Andreas Bießmann |
reinhardm |
Under Review |
| [U-Boot] MIPS: bootm.c: drop obsolete Qemu specific bootm implementation |
2013-01-12 |
Daniel Schwierzeck |
danielschwierzeck |
Under Review |
| [U-Boot] ppc460: read get_sys_info from CPR registers instead of STRP registers |
2011-07-21 |
Mike Williams |
stroese |
Under Review |
| [U-Boot] AT91: Defer Dataflash access to env_relocate_spec |
2011-08-03 |
Xu, Hong |
reinhardm |
Under Review |
| [U-Boot] AT91: fix at91cap9 SoC files |
2011-08-03 |
Reinhard Meyer |
reinhardm |
Under Review |
| [U-Boot,v3,batch,3,01/17] common: Update cmd_bdinfo for PPC |
2013-05-14 |
York Sun |
afleming |
Under Review |
| [U-Boot,v2,batch,4,03/29] net/phy: fix select line for TN80xx |
2013-03-25 |
York Sun |
afleming |
Under Review |
| [U-Boot] cmd_nand: add biterror insertion command for NAND Flash |
2012-01-04 |
Holger Brunck |
scottwood |
Under Review |
| [U-Boot,v2,batch,4,02/29] Enable L2 cache parity/ECC error checking |
2013-03-25 |
York Sun |
afleming |
Under Review |
| [U-Boot,2/2] video:trats:logo: Make tizen_hd_logo cache line aligned. |
2012-08-08 |
Łukasz Majewski |
ag |
Under Review |
| [U-Boot] Sheevaplug: Add Kirkwood watchdog support |
2012-03-28 |
Stathis Voukelatos |
prafulla@marvell.com |
Under Review |
| [U-Boot,1/9] arm926ej-s: Invalidate instruction cache in flush_cache |
2011-03-17 |
Michael Spang |
marex |
Under Review |
| [U-Boot,v2,batch,4,19/29] powerpc/t4240qds: fix PHY reset timeout issue |
2013-03-25 |
York Sun |
afleming |
Under Review |
| [U-Boot,2/2] nand: remote biterr command stub |
2012-03-28 |
Scott Wood |
scottwood |
Under Review |
| [U-Boot,v2,batch,4,22/29] powerpc/p2041: fix serdes reference clock frequency display for PC board |
2013-03-25 |
York Sun |
afleming |
Under Review |
| [U-Boot,v2,batch,4,23/29] sf: spansion: Add support for S25FL128S |
2013-03-25 |
York Sun |
afleming |
Under Review |
| [U-Boot,3/3] microblaze: Wire up OF support for emaclite |
2012-07-04 |
Stephan Linz |
monstr |
Under Review |
| [U-Boot,V3,1/2] mtd/spi/spi_flash: support CMD_READ_ID=0x90 case |
2012-07-09 |
Mikhail Kshevetskiy |
vapier |
Under Review |
| [U-Boot] spl: exynos: make spl_boot common for all exynos based platforms |
2013-03-16 |
Inderpal Singh |
prom |
Under Review |
| [U-Boot,1/5] EXYNOS: CLK: Add i2c clock |
2012-09-24 |
Piotr Wilczek |
prom |
Under Review |
| [U-Boot,3/5] EXYNOS: PINMUX: Add pinmux support for i2c |
2012-09-24 |
Piotr Wilczek |
prom |
Under Review |
| [U-Boot,5/5] DRIVERS: MISC: PMIC: Modify pmic driver to support multibus I2C |
2012-09-24 |
Piotr Wilczek |
prom |
Under Review |
| [U-Boot,2/5] EXYNOS: Add Exynos4 I2C spacing |
2012-09-24 |
Piotr Wilczek |
prom |
Under Review |
| [U-Boot,v6] Exynos5: Pinmux: Add fdt for pinmux |
2013-03-11 |
Akshay Saraswat |
prom |
Under Review |
| [U-Boot,v3,2/2] common/lcd: use lcd_setcolreg() to setup CLUT |
2012-11-06 |
Andreas Bießmann |
ag |
Under Review |
| [U-Boot,v2,batch,4,06/29] T4240/ramboot: enable PBL tool for T4240 |
2013-03-25 |
York Sun |
afleming |
Under Review |
| [U-Boot,4/5] DRIVERS: I2C: Modify I2C driver for EXYNOS4 |
2012-09-24 |
Piotr Wilczek |
prom |
Under Review |
| [U-Boot,v2,batch,4,05/29] powerpc/t4240qds: Add VDD override |
2013-03-25 |
York Sun |
afleming |
Under Review |
