Patches

Show patches with: State = Action Required       |    Archived = No   
« 1 2 3 412 13 »
Patch A/R/T S/W/F Date Submitter Delegate State
[U-Boot,23/23] boston: Enable CONFIG_DISTRO_DEFAULTS in defconfigs - - - 0 0 0 2016-09-26 Paul Burton New
[U-Boot,22/23] boston: Probe ethernet controller during boot - - - 0 0 0 2016-09-26 Paul Burton New
[U-Boot,21/23] boston: Enable Realtek ethernet PHY support - - - 0 0 0 2016-09-26 Paul Burton New
[U-Boot,20/23] boston: Bump CONFIG_SYS_BOOTM_LEN to 64MiB - - - 0 0 0 2016-09-26 Paul Burton New
[U-Boot,19/23] boston: Setup memory ranges in FDT provided to Linux - - - 0 0 0 2016-09-26 Paul Burton New
[U-Boot,18/23] boston: Move CM GCRs away from flash - - - 0 0 0 2016-09-26 Paul Burton New
[U-Boot,17/23] MIPS: Make CM GCR base configurable - - - 0 0 0 2016-09-26 Paul Burton New
[U-Boot,16/23] net: pch_gbe: Support PHY reset GPIOs - 1 - 0 0 0 2016-09-26 Paul Burton New
[U-Boot,15/23] gpio: eg20t: Add driver for Intel EG20T GPIO controllers - - - 0 0 0 2016-09-26 Paul Burton New
[U-Boot,14/23] gpio: Provide dummy get/request & is_valid functions - - - 0 0 0 2016-09-26 Paul Burton New
[U-Boot,13/23] net: pch_gbe: Add cache maintenance - - - 0 0 0 2016-09-26 Paul Burton New
[U-Boot,12/23] net: pch_gbe: CPU accessible addresses are virtual - - - 0 0 0 2016-09-26 Paul Burton New
[U-Boot,11/23] net: pch_gbe: Fix rx descriptor buffer addresses - - - 0 0 0 2016-09-26 Paul Burton New
[U-Boot,10/23] net: pch_gbe: Reset during probe - - - 0 0 0 2016-09-26 Paul Burton New
[U-Boot,09/23] boston: Disable PCI bridge memory space alignment - 1 - 0 0 0 2016-09-26 Paul Burton New
[U-Boot,08/23] pci: Make PCI bridge memory alignment configurable - 1 - 0 0 0 2016-09-26 Paul Burton New
[U-Boot,07/23] pci: Handle MIPS systems with virtual CONFIG_SYS_SDRAM_BASE - - - 0 0 0 2016-09-26 Paul Burton New
[U-Boot,06/23] pci: Set of_offset for devices not probed via DT compatible strings - - - 0 0 0 2016-09-26 Paul Burton New
[U-Boot,05/23] pci: xilinx: Avoid writing memory base or limit registers - - - 0 0 0 2016-09-26 Paul Burton New
[U-Boot,04/23] pci: xilinx: Initialise the root bridge during probe - - - 0 0 0 2016-09-26 Paul Burton New
[U-Boot,03/23] MIPS: Fix map_physmem for cached mappings - - - 0 0 0 2016-09-26 Paul Burton New
[U-Boot,02/23] MIPS: Use ram_top, not bi_memsize, in arch_lmb_reserve - - - 0 0 0 2016-09-26 Paul Burton New
[U-Boot,01/23] image: Use ram_top, not bi_memsize, in getenv_bootm_size - - - 0 0 0 2016-09-26 Paul Burton New
[U-Boot] Please pull fsl-qoriq master - - - 0 0 0 2016-09-26 York Sun New
[U-Boot] i.MX6: NAND boot with SPL - - - 0 0 0 2016-09-26 Jagannadha Sutradharudu Teki New
[U-Boot,7/7] armv7: ls102xa: Rename GIC_ADDR and DCSR_RCPM_ADDR - 1 - 0 0 0 2016-09-26 York Sun yorksun New
[U-Boot,6/7] armv7: ls1021a: Convert CONFIG_LS1_DEEP_SLEEP to Kconfig option - 1 - 0 0 0 2016-09-26 York Sun yorksun New
[U-Boot,5/7] armv8: ls1046ardb_emmc: Fix a typo in defconfig - 1 - 0 0 0 2016-09-26 York Sun yorksun New
[U-Boot,4/7] Convert CONFIG_SYS_FSL_ERRATUM_A010315 to Kconfig option - - - 0 0 0 2016-09-26 York Sun yorksun New
[U-Boot,3/7] armv8: ls1012a: Convert CONFIG_LS1012A to Kconfig option ARCH_LS1021A - 1 - 0 0 0 2016-09-26 York Sun yorksun New
[U-Boot,2/7] driver: ddr: fsl_mmdc: Pass board parameters through data structure - 1 - 0 0 0 2016-09-26 York Sun yorksun New
[U-Boot,1/7] armv8: ls1046a: Convert CONFIG_LS1046A to Kconfig option ARCH_LS1046A - 1 - 0 0 0 2016-09-26 York Sun yorksun New
[U-Boot,9/9] dtoc: Make integer division python 3.x safe 1 - - 0 0 0 2016-09-26 Paul Burton New
[U-Boot,8/9] dtoc: Decode strings for struct.unpack on python 3.x 1 - - 0 0 0 2016-09-26 Paul Burton New
[U-Boot,7/9] dtoc: Use items() to iterate over dictionaries in python 3.x - - - 0 0 0 2016-09-26 Paul Burton New
[U-Boot,6/9] patman: Use items() to iterate over dictionaries in python 3.x - - - 0 0 0 2016-09-26 Paul Burton New
[U-Boot,5/9] patman: Decode stdout/stderr as utf8, be python 3.x safe 1 - - 0 0 0 2016-09-26 Paul Burton New
[U-Boot,4/9] patman: Import 'configparser' lower case to be python 3.x safe 1 - - 0 0 0 2016-09-26 Paul Burton New
[U-Boot,3/9] patman: Make exception handling python 3.x safe 1 - - 0 0 0 2016-09-26 Paul Burton New
[U-Boot,2/9] patman: Make print statements python 3.x safe 1 - - 0 0 0 2016-09-26 Paul Burton New
[U-Boot,1/9] patman: Replace tabs with spaces 1 - - 0 0 0 2016-09-26 Paul Burton New
[U-Boot] spl: saveenv: adding saveenv support in SPL - 1 - 0 0 0 2016-09-26 B, Ravi New
[U-Boot] env: tool: add command line option to input lockfile path - - - 0 0 0 2016-09-26 B, Ravi New
[U-Boot] dra7x: dfu: qspi: increase the qspi spl partition to 256K - - - 0 0 0 2016-09-26 B, Ravi New
[U-Boot] dra7x: dfu: qspi: increase the qspi spl partition to 256K - - - 0 0 0 2016-09-26 B, Ravi New
[U-Boot] dra7xx: config: cleanup: moved to kconfig for CONFIG_SPL_ENV_SUPPORT - - - 0 0 0 2016-09-26 B, Ravi New
[U-Boot,9/9] ARM: bcm283x: use OF_CONTROL for bcm283x - 1 - 0 0 0 2016-09-26 Fabian Vogt New
[U-Boot,8/9] board: rpi: move uart deactivation to board_init - 1 - 0 0 0 2016-09-26 Fabian Vogt New
[U-Boot,7/9] serial: bcm283x_mu: support disabling after initialization - 1 - 0 0 0 2016-09-26 Fabian Vogt New
[U-Boot,6/9] fdt: adjust bcm283x device tree for u-boot - 1 - 0 0 0 2016-09-26 Fabian Vogt New
[U-Boot,5/9] fdt: import bcm283x device tree sources from the linux kernel tree - 1 - 0 0 0 2016-09-26 Fabian Vogt New
[U-Boot,4/9] fdt: add dt-bindings for bcm2835 - 1 - 0 0 0 2016-09-26 Fabian Vogt New
[U-Boot,3/9] serial: pl01x: expose skip_init platdata option in DT - 1 - 0 0 0 2016-09-26 Fabian Vogt New
[U-Boot,2/9] serial: bcm283x_mu: add device tree support - 1 - 0 0 0 2016-09-26 Fabian Vogt New
[U-Boot,1/9] gpio: bcm2835: add device tree support - 1 - 0 0 0 2016-09-26 Fabian Vogt New
[U-Boot,v3,2/2] mx6sabresd: Add SPL support for the mx6dl variant - - - 0 0 0 2016-09-26 Fabio Estevam New
[U-Boot,v3,1/2] mx6sabresd: Make SPL DDR configuration to match the DCD table - - - 0 0 0 2016-09-26 Fabio Estevam New
[U-Boot,3/3] Revert "ns16650: Make sure we have CONFIG_CLK set before using infrastructure" - 1 - 0 0 0 2016-09-26 Masahiro Yamada trini New
[U-Boot,2/3] ARM: keystone: rename clk_get_rate() to ks_clk_get_rate() - 1 - 0 0 0 2016-09-26 Masahiro Yamada trini New
[U-Boot,1/3] ARM: keystone: remove declaration of unused functions - - - 0 0 0 2016-09-26 Masahiro Yamada trini New
[U-Boot,v2] net: fec_mxc: Convert into driver model - - - 0 0 0 2016-09-26 Jagan Teki New
[U-Boot] Please pull from u-boot-i2c - - - 0 0 0 2016-09-26 Heiko Schocher New
[U-Boot] tools: imximage: use 'new style' header length for imximage v1 - - - 0 0 0 2016-09-26 Martin Kaiser New
[U-Boot] mach-zynq/Kconfig: Make SYS_VENDOR configurable - - - 0 0 0 2016-09-26 Mike Looijmans New
[U-Boot,v2] x86: baytrail: Add 2nd eMMC controller to the PCI probe list - 1 - 0 0 0 2016-09-26 Stefan Roese bmeng New
[U-Boot,PATCHv2,2/2] armv8/fsl-lsch3: consolidate the clock system initialization - - - 0 0 0 2016-09-26 Zhiqiang Hou New
[U-Boot,PATCHv2,1/2] armv8/fsl-lsch2: refactor the clock system initialization - - - 0 0 0 2016-09-26 Zhiqiang Hou New
[U-Boot,v2,1/3] arm: mvebu: create generic 88F6820 config option - - - 0 0 0 2016-09-26 Chris Packham New
[U-Boot,6/6] pcm052: add new BK4r1 target based on PCM052 SoM - - - 0 0 0 2016-09-26 Albert ARIBAUD (3ADEV) New
[U-Boot,5/6] pcm052: allow specifying onboard DDR size in configs - - - 0 0 0 2016-09-26 Albert ARIBAUD (3ADEV) New
[U-Boot,4/6] tools: mkimage: add support for Vybrid image format - - - 0 0 0 2016-09-26 Albert ARIBAUD (3ADEV) New
[U-Boot,3/6] pcm052: add 'm4go' command - - - 0 0 0 2016-09-26 Albert ARIBAUD (3ADEV) New
[U-Boot,2/6] pcm052: remove target-specific dtb name from env - - - 0 0 0 2016-09-26 Albert ARIBAUD (3ADEV) New
[U-Boot,1/6] pcm052: fix MTD partitioning - - - 0 0 0 2016-09-26 Albert ARIBAUD (3ADEV) New
[U-Boot,v2] at91: video: Support driver-model for the HLCD driver - - - 0 0 0 2016-09-26 Songjun Wu New
[U-Boot,2/2] power: regulator: lp873x: Add regulator support - - - 0 0 0 2016-09-26 Keerthy New
[U-Boot,1/2] power: pmic: lp873x: Add the base pmic support - - - 0 0 0 2016-09-26 Keerthy New
[U-Boot,RFC] ARM: create .secure_stack section only for PSCI - - - 0 0 0 2016-09-26 Masahiro Yamada New
[U-Boot,v4,6/6] configs: am57xx_evm_defconfig: Enable PALMAS options - 1 - 0 0 0 2016-09-26 Keerthy New
[U-Boot,v4,5/6] configs: dra7xx_evm_defconfig: Enable PALMAS options - 1 - 0 0 0 2016-09-26 Keerthy New
[U-Boot,v4,4/6] power: regulator: palmas: Add regulator support - 2 - 0 0 0 2016-09-26 Keerthy New
[U-Boot,v4,3/6] power: pmic: Palmas: Add the base pmic support - 2 - 0 0 0 2016-09-26 Keerthy New
[U-Boot,v4,2/6] power: regulator: Add ctrl_reg and volt_reg fields for pmic - 2 - 0 0 0 2016-09-26 Keerthy New
[U-Boot,v4,1/6] dm: i2c: Add u8 read/write i2c functions - 2 - 0 0 0 2016-09-26 Keerthy New
[U-Boot] ARM: uniphier: do not setup pins for System Bus on NAND boot mode - - - 0 0 0 2016-09-26 Masahiro Yamada masahir0y New
[U-Boot,5/5] check-config: allow to complete build even with ad-hoc CONFIG options - - - 0 0 0 2016-09-26 Masahiro Yamada trini New
[U-Boot,4/5] kbuild: generate u-boot.cfg as a byproduct of include/autoconf.mk - 1 - 0 0 0 2016-09-26 Masahiro Yamada trini New
[U-Boot,3/5] kbuild: make dependencies in scripts/Makefile.autoconf more readable - 1 - 0 0 0 2016-09-26 Masahiro Yamada trini New
[U-Boot,2/5] kbuild: move no_new_adhoc_configs_check to "all" target command - 1 - 0 0 0 2016-09-26 Masahiro Yamada trini New
[U-Boot,1/5] check-config: fix wrong comment about how to build whitelist - - - 0 0 0 2016-09-26 Masahiro Yamada trini New
[U-Boot,82/82] x86: link: Switch to 64-bit U-Boot - - - 0 0 0 2016-09-26 Simon Glass bmeng New
[U-Boot,81/82] x86: Update compile/link flags to support 64-bit U-Boot - - - 0 0 0 2016-09-26 Simon Glass bmeng New
[U-Boot,80/82] x86: link: Add build options for SPL - - - 0 0 0 2016-09-26 Simon Glass bmeng New
[U-Boot,79/82] x86: link: Set up device tree for SPL - - - 0 0 0 2016-09-26 Simon Glass bmeng New
[U-Boot,78/82] x86: link: Add SPL declarations to the binman image - - - 0 0 0 2016-09-26 Simon Glass bmeng New
[U-Boot,77/82] x86: link: Add a text base for 64-bit U-Boot - - - 0 0 0 2016-09-26 Simon Glass bmeng New
[U-Boot,76/82] x86: Add a dummy setjmp implementation for x86_64 - - - 0 0 0 2016-09-26 Simon Glass bmeng New
[U-Boot,75/82] x86: Move setjmp to the i386 directory - - - 0 0 0 2016-09-26 Simon Glass bmeng New
[U-Boot,74/82] x86: Move call64 to the i386 directory - - - 0 0 0 2016-09-26 Simon Glass bmeng New
[U-Boot,73/82] x86: Change irq_already_routed to a local variable - - - 0 0 0 2016-09-26 Simon Glass bmeng New
« 1 2 3 412 13 »