Patchwork U-Boot

login
register
mail settings

Incoming patches

« Previous 1 2 ... 5 6 7 8 9 10 11 12 13 14 Next »
Filters: State = Action Required remove filter
Patch A/R/T Date Submitter Delegate State
[U-Boot,v2] sunxi: Make dram odt-en configurable through Kconfig for A33 based boards 0 0 0 2015-05-15 Hans de Goede jwrdegoede New
[U-Boot,v2] tegra20: tamonten: Fix the early gpio init 1 0 0 2015-02-24 Alban Bedel tomcwarren New
[U-Boot,v2] tegra2: Enable data cache 0 0 0 2011-09-21 Simon Glass New
[U-Boot,v2] usb: musb-new: omap2430: Reset the MUSB controller early 0 1 0 2015-01-19 Paul Kocialkowski marex New
[U-Boot,v2] usb_storage : scan all interfaces to find a storage device 0 0 0 2015-03-04 Franck Jullien marex New
[U-Boot,v2] wandboard: Add board revision detection support 0 1 1 2015-05-21 Fabio Estevam sbabic Under Review
[U-Boot,v2] zynq: Use system timer implementation instead of our 0 0 0 2015-04-29 Michal Simek monstr New
[U-Boot,v3,(RFC),1/4] sunxi/nand: change BLOCK_SIZE in mksunxiboot to match NAND block size 0 1 0 2015-05-22 Roy Spliet jwrdegoede New
[U-Boot,v3,(RFC),2/4] sunxi: Add DMA definitions 0 0 0 2015-05-22 Roy Spliet jwrdegoede New
[U-Boot,v3,(RFC),3/4] sunxi: Match sun4i nand clock name with sun6i 0 0 0 2015-05-22 Roy Spliet jwrdegoede New
[U-Boot,v3,(RFC),4/4] sunxi/nand: Add support for booting from internal NAND memory 0 0 0 2015-05-22 Roy Spliet jwrdegoede New
[U-Boot,v3,01/10] ARM: dove: add support for Marvell Dove SoC 0 0 0 2013-01-16 Sebastian Hesselbarth prafulla@marvell.com New
[U-Boot,v3,01/10] Add getenv_ulong() to read an integer from an environment variable 0 0 0 2011-10-14 Simon Glass New
[U-Boot,v3,01/11] ARM: UniPhier: replace <asm/io.h> with <linux/io.h> 0 0 0 2015-05-29 Masahiro Yamada masahir0y New
[U-Boot,v3,02/10] GPIO: add gpio driver for Orion SoCs 0 0 0 2013-01-16 Sebastian Hesselbarth prafulla@marvell.com New
[U-Boot,v3,02/11] ARM: UniPhier: update the vendor name of UniPhier in Kconfig 0 0 0 2015-05-29 Masahiro Yamada masahir0y New
[U-Boot,v3,02/21] Fix use of int as pointer in image.c 1 0 0 2011-09-27 Simon Glass New
[U-Boot,v3,03/10] MMC: sdhci: Add support for dove sdhci 0 0 0 2013-01-16 Sebastian Hesselbarth prafulla@marvell.com New
[U-Boot,v3,03/11] ARM: UniPhier: use 32 bit register access for debug UART setting 0 0 0 2015-05-29 Masahiro Yamada masahir0y New
[U-Boot,v3,04/11] ARM: UniPhier: remove unnecessary cache coherency code 0 0 0 2015-05-29 Masahiro Yamada masahir0y New
[U-Boot,v3,05/10] block: mvsata: add dove include 1 0 0 2013-01-16 Sebastian Hesselbarth prafulla@marvell.com New
[U-Boot,v3,05/11] ARM: UniPhier: remove meaningless CONFIG_SPL_BUILD ifdefs 0 0 0 2015-05-29 Masahiro Yamada masahir0y New
[U-Boot,v3,06/10] NET: phy: add 88E1310 PHY initialization 0 0 0 2013-01-16 Sebastian Hesselbarth prafulla@marvell.com New
[U-Boot,v3,06/11] ARM: UniPhier: move CONFIG_SYS_TEXT_BASE to Kconfig 0 0 0 2015-05-29 Masahiro Yamada masahir0y New
[U-Boot,v3,07/10] NET: mvgbe: add phylib support 1 0 0 2013-01-16 Sebastian Hesselbarth prafulla@marvell.com New
[U-Boot,v3,07/11] ARM: UniPhier: set MACH_PH1_PRO4 as default SoC 0 0 0 2015-05-29 Masahiro Yamada masahir0y New
[U-Boot,v3,08/10] NET: mvgbe: add support for Dove 0 0 0 2013-01-16 Sebastian Hesselbarth prafulla@marvell.com New
[U-Boot,v3,08/11] ARM: UniPhier: enable CONFIG_NET_RANDOM_ETHADDR 0 0 0 2015-05-29 Masahiro Yamada masahir0y New
[U-Boot,v3,09/10] Boards: Add support for SolidRun CuBox 0 0 0 2013-01-16 Sebastian Hesselbarth prafulla@marvell.com New
[U-Boot,v3,09/11] ARM: UniPhier: update DDR PHY register map for PH1-Pro5 0 0 0 2015-05-29 Masahiro Yamada masahir0y New
[U-Boot,v3,1/2] arm: marvell: add LIBFDT support to sheevaplug 0 0 0 2014-10-25 DrEagle prafulla@marvell.com New
[U-Boot,v3,1/3] lacie_kw: sort #ifdef lists by CONFIG_ identifiers 0 0 0 2013-07-01 Frederic Leroy prafulla@marvell.com New
[U-Boot,v3,1/3] sunxi: Create helper function veryfing valid boot signature on MMC 0 0 0 2015-05-29 Daniel Kochmański New
[U-Boot,v3,1/3] usb: usb_new_device return codes consistency 0 0 0 2015-04-04 Paul Kocialkowski marex New
[U-Boot,v3,1/4] Kconfig: Enable usage of escape char '\' in string values 0 1 0 2015-05-18 Stefan Roese trini Under Review
[U-Boot,v3,1/4] arm: mvebu: Disable L2 cache before enabling d-cache 0 0 1 2015-05-18 Kevin Smith prafulla@marvell.com New
[U-Boot,v3,1/6] Move vsprintf functions into their own header 0 0 0 2011-10-18 Simon Glass New
[U-Boot,v3,1/6] SHEEVAPLUG : FIX typo 0 0 0 2014-12-17 DrEagle prafulla@marvell.com New
[U-Boot,v3,1/6] fdt: ARM: Add device tree control of U-Boot (CONFIG_OF_CONTROL) 0 0 0 2011-10-11 Simon Glass New
[U-Boot,v3,1/9] sf: Update SST flash params 0 0 0 2014-12-10 Bin Meng jagan Under Review
[U-Boot,v3,1/9] tegra: Rename NV_PA_PMC_BASE to TEGRA2_PMC_BASE 1 0 0 2012-02-04 Simon Glass New
[U-Boot,v3,10/10] tools: Add support for Dove to kwboot 1 0 0 2013-01-16 Sebastian Hesselbarth prafulla@marvell.com New
[U-Boot,v3,10/11] ARM: UniPhier: fix pin mux setting for USB port 2 of PH1-sLD8 0 0 0 2015-05-29 Masahiro Yamada masahir0y New
[U-Boot,v3,11/11] ARM: UniPhier: add pin mux setting for NAND CS1 of PH1-Pro4 0 0 0 2015-05-29 Masahiro Yamada masahir0y New
[U-Boot,v3,13/14] dm: tegra: Enable driver model in SPL and adjust the GPIO driver 0 0 0 2014-11-11 Simon Glass sjg New
[U-Boot,v3,19/21] Use uintptr_t for 32/64-bit compatibility 0 0 0 2011-09-27 Simon Glass New
[U-Boot,v3,2/2] arm: marvell: fix ENV and MTDPARTS for sheevaplug 0 0 0 2014-10-25 DrEagle prafulla@marvell.com New
[U-Boot,v3,2/2] common/lcd: use lcd_setcolreg() to setup CLUT 0 0 0 2012-11-06 Andreas Bießmann ag Under Review
[U-Boot,v3,2/3] LaCie/common: Uses #defines for ethernet phy leds setup 0 0 0 2013-07-01 Frederic Leroy prafulla@marvell.com New
[U-Boot,v3,2/3] sunxi/spl: Detect at runtime where from SPL was read 0 0 0 2015-05-29 Daniel Kochmański New
[U-Boot,v3,2/3] usb: Check usb_new_device for failure 0 0 0 2015-04-04 Paul Kocialkowski marex New
[U-Boot,v3,2/4] arm: mvebu: Update CBAR with SOC regs base 1 0 0 2015-05-18 Kevin Smith prafulla@marvell.com New
[U-Boot,v3,2/4] autoboot.c: Remove CONFIG_AUTOBOOT_STOP_STR2 and CONFIG_AUTOBOOT_DELAY_STR2 0 2 0 2015-05-18 Stefan Roese trini Under Review
[U-Boot,v3,2/5] Make 'run' use run_command_list() instead of run_command() 0 0 0 2013-10-26 Simon Glass trini New
[U-Boot,v3,2/6] Add limits.h to hold basic limits 0 0 0 2011-10-18 Simon Glass New
[U-Boot,v3,2/6] SHEEVAPLUG : FIX multiple defines 0 0 0 2014-12-17 DrEagle prafulla@marvell.com New
[U-Boot,v3,2/6] fdt: Add support for embedded device tree (CONFIG_OF_EMBED) 0 0 0 2011-10-11 Simon Glass New
[U-Boot,v3,2/9] sf: Update Atmel flash params 0 0 0 2014-12-10 Bin Meng jagan Under Review
[U-Boot,v3,20/21] Adjust dependency rules to permit per-file flags 0 0 0 2011-09-27 Simon Glass New
[U-Boot,v3,3/3] arm: add support for LaCie CloudBox 0 0 0 2013-07-01 Frederic Leroy prafulla@marvell.com New
[U-Boot,v3,3/3] mmc: Protect `mmc_initialize` from initilizing mmc multiple times 0 0 0 2015-05-29 Daniel Kochmański New
[U-Boot,v3,3/3] usb: Early failure when the first descriptor read fails or is invalid 0 0 0 2015-04-04 Paul Kocialkowski marex New
[U-Boot,v3,3/4] arm: ls102xa: Enable Driver Model SPI for ls1021aqds 0 0 0 2015-05-18 Haikun.Wang@freescale.com jagan New
[U-Boot,v3,3/4] autoboot.c: Move config options to Kconfig 0 1 0 2015-05-18 Stefan Roese trini Under Review
[U-Boot,v3,3/4] mv-common.h: Include support for device trees 1 0 0 2015-05-18 Kevin Smith prafulla@marvell.com New
[U-Boot,v3,3/4] x86: gpio: add pinctrl support from the device tree 0 0 0 2015-05-12 Gabriel Huau sjg New
[U-Boot,v3,3/5] Allow U-Boot scripts to be placed in a .env file 0 0 0 2013-10-26 Simon Glass trini New
[U-Boot,v3,3/6] Add safe vsnprintf and snprintf library functions 0 0 0 2011-10-18 Simon Glass New
[U-Boot,v3,3/6] SHEEVAPLUG : ADD generic board define 0 0 0 2014-12-17 DrEagle prafulla@marvell.com New
[U-Boot,v3,3/6] fdt: Add support for a separate device tree (CONFIG_OF_SEPARATE) 0 0 0 2011-10-11 Simon Glass New
[U-Boot,v3,3/9] sf: Update EON flash params 0 0 0 2014-12-10 Bin Meng jagan Under Review
[U-Boot,v3,4/4] arm: ls102xa: Enable Driver Model SPI for ls1021atwr 0 1 1 2015-05-18 Haikun.Wang@freescale.com jagan New
[U-Boot,v3,4/4] autoboot.c: Add feature to stop autobooting via SHA256 encrypted password 0 1 0 2015-05-18 Stefan Roese trini Under Review
[U-Boot,v3,4/4] db-88f6820-gp.h: Load data blobs into lower memory 1 0 0 2015-05-18 Kevin Smith prafulla@marvell.com New
[U-Boot,v3,4/4] x86: minnowmax: initialize the pin-muxing from device tree 1 0 0 2015-05-12 Gabriel Huau sjg New
[U-Boot,v3,4/5] env: Allow environment files to use the C preprocessor 0 0 0 2013-10-26 Simon Glass trini New
[U-Boot,v3,4/6] SHEEVAPLUG : ADD CONFIG_CMD_FAT 0 0 0 2014-12-17 DrEagle prafulla@marvell.com New
[U-Boot,v3,4/6] fdt: ARM: Implement embedded and separate device tree 0 0 0 2011-10-11 Simon Glass New
[U-Boot,v3,4/6] vsprintf: Introduce ugly macros to reduce code size 0 0 0 2011-10-18 Simon Glass New
[U-Boot,v3,4/9] sf: Update GigaDevice flash params 0 0 0 2014-12-10 Bin Meng jagan Under Review
[U-Boot,v3,5/5] RFC: tegra: Convert to using environment files 0 0 0 2013-10-26 Simon Glass trini New
[U-Boot,v3,5/6] SHEEVAPLUG : ADD FDT support 0 0 0 2014-12-17 DrEagle prafulla@marvell.com New
[U-Boot,v3,5/6] fdt: ARM: Add fdtcontroladdr to set device tree address in environment 0 0 0 2011-10-11 Simon Glass New
[U-Boot,v3,5/6] serial: stm32: add stm32f1 support 0 0 0 2015-05-05 Matt Porter trini Under Review
[U-Boot,v3,5/6] vsprintf: Move function documentation into header file 0 0 0 2011-10-18 Simon Glass New
[U-Boot,v3,5/9] sf: Update Macronix flash params 0 0 0 2014-12-10 Bin Meng jagan Under Review
[U-Boot,v3,6/6] Make printf and vprintf safe from buffer overruns 0 0 0 2011-10-18 Simon Glass New
[U-Boot,v3,6/6] SHEEVAPLUG : REDEFINE MTDPARTS 0 0 0 2014-12-17 DrEagle prafulla@marvell.com New
[U-Boot,v3,6/6] board: add stm3210e-eval board support 0 0 0 2015-05-05 Matt Porter trini Under Review
[U-Boot,v3,6/6] fdt: add decode helper library 0 0 0 2011-10-11 Simon Glass New
[U-Boot,v3,6/9] sf: Update Spansion flash params 0 0 0 2014-12-10 Bin Meng jagan Under Review
[U-Boot,v3,7/9] sf: Update Micron flash params 0 0 0 2014-12-10 Bin Meng jagan Under Review
[U-Boot,v3,8/9] sf: Update Winbond flash params 0 0 0 2014-12-10 Bin Meng jagan Under Review
[U-Boot,v3,9/9] sf: Give proper spacing between flash table params 0 0 0 2014-12-10 Bin Meng jagan Under Review
[U-Boot,v3,follow-up,3/3] sunxi: Remove redundant check from `board_mmc_init` for signature 0 0 0 2015-05-29 Daniel Kochmański New
[U-Boot,v3,resend,2/3] sunxi/spl: Detect at runtime where from SPL was read 0 0 0 2015-05-29 Daniel Kochmański New
[U-Boot,v3:,DNS320,support,1/4] kirkwood: Rename dns325 to dnskw 0 0 0 2014-05-22 Bastien ROUCARIES prafulla@marvell.com New
[U-Boot,v3:,DNS320,support,2/4] kirkwood: Add support for the D-Link DNS-320 0 0 0 2014-05-22 Bastien ROUCARIES prafulla@marvell.com New
[U-Boot,v3:,DNS320,support,3/4] kirkwood: Set unused SD pins back to GPIO for DNS-320 & DNS-325 0 0 0 2014-05-22 Bastien ROUCARIES prafulla@marvell.com New
[U-Boot,v3:,DNS320,support,4/4] kirkwood: Shorten DNS-325 IDENT_STRING to match DNS-320 0 0 0 2014-05-22 Bastien ROUCARIES prafulla@marvell.com New