Patchwork U-Boot

login
register
mail settings

Incoming patches

« Previous 1 2 3 4 5 6 7 8 9 10 ... 10 11 Next »
Filters: State = Action Required remove filter    |    Archived = No remove filter
Patch A/R/T Date Submitter Delegate State
[U-Boot,v1,04/12] arm: mvebu: spl.c: Add call to board_early_init_f() 0 0 0 2015-06-03 Stefan Roese prafulla@marvell.com New
[U-Boot,v1,03/12] arm: mvebu: Use default reg base address for SPL on A38x 0 0 0 2015-06-03 Stefan Roese prafulla@marvell.com New
[U-Boot,v1,02/12] tools/kwboot: Add parameters to set delay and timeout via cmdline 0 0 0 2015-06-03 Stefan Roese prafulla@marvell.com New
[U-Boot] tools/kwboot: Add parameters to set delay and timeout via cmdline 0 0 0 2015-05-29 Stefan Roese prafulla@marvell.com New
[U-Boot,v3,4/4] db-88f6820-gp.h: Load data blobs into lower memory 1 0 0 2015-05-18 Kevin Smith prafulla@marvell.com New
[U-Boot,v3,3/4] mv-common.h: Include support for device trees 1 0 0 2015-05-18 Kevin Smith prafulla@marvell.com New
[U-Boot,v3,2/4] arm: mvebu: Update CBAR with SOC regs base 1 0 0 2015-05-18 Kevin Smith prafulla@marvell.com New
[U-Boot,v3,1/4] arm: mvebu: Disable L2 cache before enabling d-cache 0 0 1 2015-05-18 Kevin Smith prafulla@marvell.com New
[U-Boot] arm: mvebu: Remove "u-boot.kwb" CONFIG_BUILD_TARGET for non-SPL targets 0 1 0 2015-05-04 Stefan Roese prafulla@marvell.com New
[U-Boot,RESEND,v3,13/13] arm: mvebu: Add Armada A38x DB-88F6820-GP board support 0 0 2 2015-04-25 Stefan Roese prafulla@marvell.com New
[U-Boot,RESEND,v3,12/13] arm: mvebu: Add d-cache invalidate before enabling the d-cache 0 0 2 2015-04-25 Stefan Roese prafulla@marvell.com New
[U-Boot,RESEND,v3,11/13] arm: mvebu: mv-common.h: Add CONFIG_PREBOOT 0 0 2 2015-04-25 Stefan Roese prafulla@marvell.com New
[U-Boot,RESEND,v3,10/13] arm: mvebu: Remove coherency configuration 0 0 2 2015-04-25 Stefan Roese prafulla@marvell.com New
[U-Boot,RESEND,v3,09/13] arm: mvebu: Change network init code to allow a more flexible setup 1 0 2 2015-04-25 Stefan Roese prafulla@marvell.com New
[U-Boot,RESEND,v3,08/13] arm: mvebu: Add basic Armada 38x support 0 0 2 2015-04-25 Stefan Roese prafulla@marvell.com New
[U-Boot,RESEND,v3,07/13] arm: mvebu: Move CONFIG_SPL_LDSCRIPT to common header 0 0 2 2015-04-25 Stefan Roese prafulla@marvell.com New
[U-Boot,RESEND,v3,06/13] arm: mvebu: Only define MV88F78X60 for Armada XP 0 0 2 2015-04-25 Stefan Roese prafulla@marvell.com New
[U-Boot,RESEND,v3,05/13] arm: mvebu: Remove unreferenced define 0 0 2 2015-04-25 Stefan Roese prafulla@marvell.com New
[U-Boot,RESEND,v3,04/13] arm: mvebu: Change header macros from ARMADA_XP to MVEBU 0 0 2 2015-04-25 Stefan Roese prafulla@marvell.com New
[U-Boot,RESEND,v3,03/13] arm: mvebu: Move mvebu-common into mach-mvebu 0 0 2 2015-04-25 Stefan Roese prafulla@marvell.com New
[U-Boot,RESEND,v3,02/13] arm: armada-xp: Move SoC headers to mach-mvebu/include/mach 0 0 2 2015-04-25 Stefan Roese prafulla@marvell.com New
[U-Boot,RESEND,v3,01/13] arm: armada-xp: Move SoC sources to mach-mvebu 0 0 2 2015-04-25 Stefan Roese prafulla@marvell.com New
[U-Boot] arm: mvebu: db-mv784mp-gp: Fix ECC I2C address 0 0 0 2015-04-22 Stefan Roese prafulla@marvell.com New
[U-Boot] tools/kwbimage.c: Correct header size for SPI boot 0 0 1 2015-03-16 Kevin Smith prafulla@marvell.com New
[U-Boot] arm: armada-xp: Fix SPL for AXP by using save_boot_params_ret 0 0 0 2015-03-11 Stefan Roese prafulla@marvell.com New
[U-Boot,RFC,v1] kwbimage: Align v1 binary header to 4B 1 0 0 2015-02-22 Chris Packham prafulla@marvell.com New
[U-Boot,2/2] arm:aspenite: Convert to generic board 1 0 0 2015-02-16 Ajay Bhargav prafulla@marvell.com New
[U-Boot,1/2] arm:gplugd: Convert to generic board 1 0 0 2015-02-16 Ajay Bhargav prafulla@marvell.com New
[U-Boot] lsxl: add a README file 0 0 0 2015-02-13 Michael Walle prafulla@marvell.com New
[U-Boot,v2,11/11] arm: armada-xp: Change built target to include the SPL binary as bin_hdr 0 0 0 2015-01-19 Stefan Roese prafulla@marvell.com New
[U-Boot,v2,10/11] arm: mvebu: Placeholder bin_hdr file can now be removed 0 0 0 2015-01-19 Stefan Roese prafulla@marvell.com New
[U-Boot,v2,09/11] arm: maxbcm: Enable SPL to include DDR training code into U-Boot 0 0 0 2015-01-19 Stefan Roese prafulla@marvell.com New
[U-Boot,v2,08/11] arm: db-mv784mp-gp: Enable SPL to include DDR training code into U-Boot 0 0 0 2015-01-19 Stefan Roese prafulla@marvell.com New
[U-Boot,v2,07/11] Makefile: Add another kwb build target used on Marvell Armada-XP (AXP) 0 0 0 2015-01-19 Stefan Roese prafulla@marvell.com New
[U-Boot,v2,05/11] scripts/Makefile.spl: Add MVEBU DDR code to SPL 0 0 0 2015-01-19 Stefan Roese prafulla@marvell.com New
[U-Boot,v2,04/11] arm: armada-xp: Add SPL support used to include the DDR training code 0 0 0 2015-01-19 Stefan Roese prafulla@marvell.com New
[U-Boot,v2,03/11] arm: mvebu: Add Serdes PHY config code 0 0 0 2015-01-19 Stefan Roese prafulla@marvell.com New
[U-Boot,v2,02/11] arm: mvebu: drivers/ddr: Add DDR3 driver with training code from Marvell bin_hdr 0 0 0 2015-01-19 Stefan Roese prafulla@marvell.com New
[U-Boot] net: Add mv88e60xx support to the mv88e61xx driver 0 1 0 2015-01-06 Joshua Scott prafulla@marvell.com New
[U-Boot,v2,1/1] marvell: kirkwood: guruplug refresh for newer kernel 0 0 0 2014-12-19 DrEagle prafulla@marvell.com New
[U-Boot,1/1] kikwood: uboot-envtools: add plugs boards 0 0 0 2014-12-18 DrEagle prafulla@marvell.com New
[U-Boot,v3,6/6] SHEEVAPLUG : REDEFINE MTDPARTS 0 0 0 2014-12-17 DrEagle prafulla@marvell.com New
[U-Boot,v3,5/6] SHEEVAPLUG : ADD FDT support 0 0 0 2014-12-17 DrEagle prafulla@marvell.com New
[U-Boot,v3,4/6] SHEEVAPLUG : ADD CONFIG_CMD_FAT 0 0 0 2014-12-17 DrEagle prafulla@marvell.com New
[U-Boot,v3,3/6] SHEEVAPLUG : ADD generic board define 0 0 0 2014-12-17 DrEagle prafulla@marvell.com New
[U-Boot,v3,2/6] SHEEVAPLUG : FIX multiple defines 0 0 0 2014-12-17 DrEagle prafulla@marvell.com New
[U-Boot,v3,1/6] SHEEVAPLUG : FIX typo 0 0 0 2014-12-17 DrEagle prafulla@marvell.com New
[U-Boot,v2,1/1] ARM: kirkwood: mvebu_mmc: Speed up access time 0 0 0 2014-12-04 DrEagle prafulla@marvell.com New
[U-Boot,6/6] kirkwood: sheevaplug: add CONFIG_SYS_GENERIC_BOARD define 1 0 0 2014-11-30 Luka Perkov prafulla@marvell.com New
[U-Boot,5/6] kirkwood: pogo_e02: add CONFIG_SYS_GENERIC_BOARD define 1 0 0 2014-11-30 Luka Perkov prafulla@marvell.com New
[U-Boot,4/6] kirkwood: iconnect: add CONFIG_SYS_GENERIC_BOARD define 1 0 0 2014-11-30 Luka Perkov prafulla@marvell.com New
[U-Boot,3/6] kirkwood: goflexhome: add CONFIG_SYS_GENERIC_BOARD define 1 0 0 2014-11-30 Luka Perkov prafulla@marvell.com New
[U-Boot,2/6] kirkwood: dockstar: add CONFIG_SYS_GENERIC_BOARD define 1 0 0 2014-11-30 Luka Perkov prafulla@marvell.com New
[U-Boot,1/6] kirkwood: ib62x0: add CONFIG_SYS_GENERIC_BOARD define 1 0 0 2014-11-30 Luka Perkov prafulla@marvell.com New
[U-Boot,v1] tools/kwboot: Allow just -t to function 1 0 0 2014-11-25 Suriyan Ramasami prafulla@marvell.com New
[U-Boot] mvebu_mmc: Speed up access time 0 0 0 2014-11-03 Mario Schuknecht prafulla@marvell.com New
[U-Boot,v3,2/2] arm: marvell: fix ENV and MTDPARTS for sheevaplug 0 0 0 2014-10-25 DrEagle prafulla@marvell.com New
[U-Boot,v3,1/2] arm: marvell: add LIBFDT support to sheevaplug 0 0 0 2014-10-25 DrEagle prafulla@marvell.com New
[U-Boot] openrd: Undefine CONFIG_CMD_NFS 0 0 0 2014-10-23 Tom Rini prafulla@marvell.com New
[U-Boot,2/2] ARM: sheevaplug: fix ENV offset and MTDPARTS 0 0 0 2014-10-18 DrEagle prafulla@marvell.com New
[U-Boot,1/1] ARM: sheevaplug: add LIBFDT support 0 0 0 2014-10-18 DrEagle prafulla@marvell.com New
[U-Boot,1/1] ARM: sheevaplug: convert to generic board support 0 0 0 2014-09-30 David du Colombier prafulla@marvell.com New
[U-Boot,1/1] ARM: sheevaplug: convert to generic board support 0 0 0 2014-09-30 David du Colombier prafulla@marvell.com New
[U-Boot,v1,22/25] tools/kwboot: Sync with latest barebox version to support Armada XP 0 0 1 2014-07-03 Luka Perkov prafulla@marvell.com New
[U-Boot] kirkwood: ib62x0: add CONFIG_SYS_GENERIC_BOARD define 2 0 0 2014-07-02 Luka Perkov prafulla@marvell.com New
[U-Boot] kirkwood: define empty CONFIG_MVGBE_PORTS by default 2 0 0 2014-07-02 Luka Perkov prafulla@marvell.com New
[U-Boot] ARM: kirkwood: fix cpu info for 6282 device id 2 0 0 2014-07-02 Luka Perkov prafulla@marvell.com New
[U-Boot] kirkwood: cosmetic: style fixes in kwbimage.cfg files 2 0 0 2014-07-02 Luka Perkov prafulla@marvell.com New
[U-Boot,4/4] kirkwood: Shorten DNS-325 IDENT_STRING to match DNS-320 0 0 0 2014-06-08 Bastien ROUCARIES prafulla@marvell.com New
[U-Boot,3/4] kirkwood: Set unused SD pins back to GPIO for DNS-320 & DNS-325 0 0 0 2014-06-08 Bastien ROUCARIES prafulla@marvell.com New
[U-Boot,2/4] kirkwood: Add support for the D-Link DNS-320 0 0 0 2014-06-08 Bastien ROUCARIES prafulla@marvell.com New
[U-Boot,1/4] kirkwood: Rename dns325 to dnskw 0 0 0 2014-06-08 Bastien ROUCARIES prafulla@marvell.com New
[U-Boot,v3:,DNS320,support,4/4] kirkwood: Shorten DNS-325 IDENT_STRING to match DNS-320 0 0 0 2014-05-22 Bastien ROUCARIES prafulla@marvell.com New
[U-Boot,v3:,DNS320,support,3/4] kirkwood: Set unused SD pins back to GPIO for DNS-320 & DNS-325 0 0 0 2014-05-22 Bastien ROUCARIES prafulla@marvell.com New
[U-Boot,v3:,DNS320,support,2/4] kirkwood: Add support for the D-Link DNS-320 0 0 0 2014-05-22 Bastien ROUCARIES prafulla@marvell.com New
[U-Boot,v3:,DNS320,support,1/4] kirkwood: Rename dns325 to dnskw 0 0 0 2014-05-22 Bastien ROUCARIES prafulla@marvell.com New
[U-Boot,4/4] kirkwood: Shorten DNS-325 IDENT_STRING to match DNS-320 0 0 0 2014-05-18 Bastien ROUCARIES prafulla@marvell.com New
[U-Boot,3/4] kirkwood: Set unused SD pins back to GPIO for DNS-320 & DNS-325 0 0 0 2014-05-18 Bastien ROUCARIES prafulla@marvell.com New
[U-Boot,2/4] kirkwood: Add support for the D-Link DNS-320 0 0 0 2014-05-18 Bastien ROUCARIES prafulla@marvell.com New
[U-Boot,1/4] kirkwood: Rename dns325 to dnskw 0 0 0 2014-05-18 Bastien ROUCARIES prafulla@marvell.com New
[U-Boot] arm/km: fix i2c mux define for km_kirkwood_128m16 target 1 0 0 2013-10-07 Holger Brunck prafulla@marvell.com New
[U-Boot] kirkwood: use 64bit integer for IDE LBA sector numbers 0 0 0 2013-08-11 Sascha Silbe prafulla@marvell.com New
[U-Boot,8/8] arm kirkwood update sheevaplug defaults config 0 0 0 2013-07-07 DrEagle prafulla@marvell.com New
[U-Boot,7/8] arm kirkwood add MVSATA sheevaplug support 0 0 0 2013-07-07 DrEagle prafulla@marvell.com New
[U-Boot,6/8] arm kirkwood add MVSDIO sheevaplug support 0 0 0 2013-07-07 DrEagle prafulla@marvell.com New
[U-Boot,5/8] arm kirkwood add MVSDIO kirkwood support 0 0 0 2013-07-07 DrEagle prafulla@marvell.com New
[U-Boot,4/8] arm kirkwood add MVSDIO driver v3 0 0 0 2013-07-07 DrEagle prafulla@marvell.com New
[U-Boot,3/8] arm kirkwood add kw88f6282 support 0 0 0 2013-07-07 DrEagle prafulla@marvell.com New
[U-Boot,2/8] arm kirkwood update supported devices and revisions 0 0 0 2013-07-07 DrEagle prafulla@marvell.com New
[U-Boot,1/8] arm kirkwood - add kirkwood_id 0 0 0 2013-07-07 DrEagle prafulla@marvell.com New
[U-Boot] Marvell SheevaPlug v2013.04 Refresh (ask for review) 0 0 0 2013-07-02 DrEagle prafulla@marvell.com New
[U-Boot,v3,3/3] arm: add support for LaCie CloudBox 0 0 0 2013-07-01 Frederic Leroy prafulla@marvell.com New
[U-Boot,v3,2/3] LaCie/common: Uses #defines for ethernet phy leds setup 0 0 0 2013-07-01 Frederic Leroy prafulla@marvell.com New
[U-Boot,v3,1/3] lacie_kw: sort #ifdef lists by CONFIG_ identifiers 0 0 0 2013-07-01 Frederic Leroy prafulla@marvell.com New
[U-Boot,v5,8/8] Boards: Add support for SolidRun CuBox 0 0 0 2013-06-25 Sascha Silbe prafulla@marvell.com New
[U-Boot,v5,7/8] NET: mvgbe: avoid unused variable warning when used without phylib support 0 0 0 2013-06-25 Sascha Silbe prafulla@marvell.com Under Review
[U-Boot,v5,6/8] block: mvsata: add dove include 1 0 0 2013-06-25 Sascha Silbe prafulla@marvell.com New
[U-Boot,v5,4/8] MMC: sdhci: Add support for dove sdhci 0 0 0 2013-06-25 Sascha Silbe prafulla@marvell.com New
[U-Boot,v5,3/8] GPIO: add Dove support to Kirkwood GPIO driver 0 0 0 2013-06-25 Sascha Silbe prafulla@marvell.com New
[U-Boot,v5,2/8] usb: ehci-marvell: add support for second USB controller 0 0 0 2013-06-25 Sascha Silbe prafulla@marvell.com New