Patchwork U-Boot

login
register
mail settings

Incoming patches

« Previous 1 2 3 4 5 6 7 8 9 10 ... 14 15 Next »
Filters: State = Action Required remove filter
Patch A/R/T Date Submitter Delegate State
[U-Boot,5/6] zynqmp: Enable FS_GENERIC option 0 0 0 2015-04-15 Michal Simek monstr New
[U-Boot,4/6] zynqmp: Add SPI driver support for ZynqMP 0 0 0 2015-04-15 Michal Simek monstr New
[U-Boot,3/6] zynqmp: i2c: Enable i2c driver for zynqMP 0 0 0 2015-04-15 Michal Simek monstr New
[U-Boot,2/6] zynqmp: Add support for EMMC bootmode 0 0 0 2015-04-15 Michal Simek monstr New
[U-Boot,1/6] zynqmp: Add support for emulation platform - Veloce 0 0 0 2015-04-15 Michal Simek monstr New
[U-Boot] zynq: slcr: Disable all level shifters 0 0 0 2015-04-15 Michal Simek monstr New
[U-Boot] serial: zynq: Add support for slow emulation platform 0 0 0 2015-04-15 Michal Simek monstr New
[U-Boot] microblaze: Fix EMAC Lite initialization 0 0 0 2015-04-14 Nathan Rossi monstr New
[U-Boot] zynq: Add Zynq PicoZed board support 0 0 0 2015-04-14 Nathan Rossi monstr New
[U-Boot] gpio: add Xilinx Zynq PS GPIO driver 0 0 1 2015-03-20 rnd4@dave-tech.it monstr New
[U-Boot,2/2] microblaze: spl: Add LISTS to linker script 0 0 0 2015-02-03 Michal Simek monstr New
[U-Boot,1/2] microblaze: spl: Do not call mem_malloc_init and use early alloc 0 0 0 2015-02-03 Michal Simek monstr New
[U-Boot,v2,5/5] microblaze: Add support for CONFIG_SYS_MALLOC_F_LEN 0 0 0 2015-02-02 Michal Simek monstr New
[U-Boot,v2,4/5] microblaze: Do not use CONFIG_SYS_GENERIC_GLOBAL_DATA 0 0 0 2015-02-02 Michal Simek monstr New
[U-Boot,v2,3/5] bdinfo: Show information about fdt blob via bdinfo 0 0 0 2015-02-02 Michal Simek monstr New
[U-Boot,v2,2/5] microblaze: Speedup code copy 0 0 0 2015-02-02 Michal Simek monstr New
[U-Boot,v2,1/5] microblaze: Move architecture to use generic board init 0 0 0 2015-02-02 Michal Simek monstr New
[U-Boot,14/14] bdinfo: Show information about fdt blob via bdinfo 0 0 0 2015-01-27 Michal Simek monstr New
[U-Boot,13/14] microblaze: Speedup code copy 0 0 0 2015-01-27 Michal Simek monstr New
[U-Boot,12/14] microblaze: Move architecture to use generic board init 0 0 0 2015-01-27 Michal Simek monstr New
[U-Boot,11/14] microblaze: Enable SPL_NOR support when FLASH_BASE is setup 0 0 0 2015-01-27 Michal Simek monstr New
[U-Boot,10/14] microblaze: Fix gd_t address which is placed at the end of BRAM 0 0 0 2015-01-27 Michal Simek monstr New
[U-Boot,09/14] microblaze: Remove unused asm label 0 0 0 2015-01-27 Michal Simek monstr New
[U-Boot,08/14] microblaze: Use standard interrupt_init() function 0 0 0 2015-01-27 Michal Simek monstr New
[U-Boot,07/14] microblaze: Remove unneeded data section adding from DTB 0 0 0 2015-01-27 Michal Simek monstr New
[U-Boot,06/14] microblaze: Add debug message about enabling interrupts 0 0 0 2015-01-27 Michal Simek monstr New
[U-Boot,05/14] microblaze: Fix coding style 0 0 0 2015-01-27 Michal Simek monstr New
[U-Boot,04/14] microblaze: Remove DEBUG_INT macro and use debug() instead 0 0 0 2015-01-27 Michal Simek monstr New
[U-Boot,03/14] microblaze: Fix coding style in exception.c 0 0 0 2015-01-27 Michal Simek monstr New
[U-Boot,02/14] microblaze: Show return address from exception 0 0 0 2015-01-27 Michal Simek monstr New
[U-Boot,01/14] microblaze: Fix stack usage in interrupt handler 0 0 0 2015-01-27 Michal Simek monstr New
[U-Boot] mmc: zynq: Use phys_addr_t for addresses 0 0 0 2015-01-14 Michal Simek monstr New
[U-Boot] net: gem: Use phys_addr_t instead of int for addresses 0 0 0 2015-01-14 Michal Simek monstr New
[U-Boot] serial: Extend structure comments with register offset 0 0 0 2015-01-14 Michal Simek monstr New
[U-Boot,12/12] ARM: zynq: Add USB lthor download protocol support 0 0 0 2015-01-14 Michal Simek monstr New
[U-Boot,11/12] ARM: zynq: Enable DFU functionality in zynq 0 0 0 2015-01-14 Michal Simek monstr New
[U-Boot,10/12] ARM: zynq: provide config option to select emio 0 0 0 2015-01-14 Michal Simek monstr New
[U-Boot,09/12] ARM: zynq: Group ethernet configuration options together 0 0 0 2015-01-14 Michal Simek monstr New
[U-Boot,08/12] ARM: zynq: Use CMD_FS_GENERIC 0 0 0 2015-01-14 Michal Simek monstr New
[U-Boot,07/12] ARM: zynq: Show board information by default 0 0 0 2015-01-14 Michal Simek monstr New
[U-Boot,04/12] ARM: zynq: slcr: Dont modify the reserved bits 0 2 0 2015-01-14 Michal Simek monstr New
[U-Boot,03/12] ARM: zynq: ddrc: Setup half of memory only for ECC case 0 0 0 2015-01-14 Michal Simek monstr New
[U-Boot,02/12] ARM: zynq: Remove empty line 0 0 0 2015-01-14 Michal Simek monstr New
[U-Boot,01/12] ARM: zynq: Enable the Neon instructions 1 0 0 2015-01-14 Michal Simek monstr New
[U-Boot,11/11] fpga: zynqpl: Add support for zc7035 0 0 0 2015-01-14 Michal Simek monstr New
[U-Boot,10/11] fpga: xilinx: Show fpga info if defined 0 1 0 2015-01-14 Michal Simek monstr New
[U-Boot,09/11] fpga: xilinx: Check if fpga operations are defined 0 1 0 2015-01-14 Michal Simek monstr New
[U-Boot,08/11] fpga: xilinx: zynqpl: Setup NULL fpga_op without driver 0 0 0 2015-01-14 Michal Simek monstr New
[U-Boot,07/11] fpga: xilinx: virtex2: Fix macro indentation 0 0 0 2015-01-14 Michal Simek monstr New
[U-Boot,06/11] fpga: xilinx: virtex2: Setup NULL fpga_op without driver 0 0 0 2015-01-14 Michal Simek monstr New
[U-Boot,05/11] fpga: xilinx: spartan3: Setup NULL fpga_op without driver 0 0 0 2015-01-14 Michal Simek monstr New
[U-Boot,04/11] fpga: xilinx: spartan2: Setup NULL fpga_op without driver 0 0 0 2015-01-14 Michal Simek monstr New
[U-Boot,03/11] fpga: Export fpga_get_desc for SPL 0 0 0 2015-01-14 Michal Simek monstr New
[U-Boot,02/11] fpga: Remove extern prototypes from .h 0 0 0 2015-01-14 Michal Simek monstr New
[U-Boot,01/11] fpga: Protect GZIP usage when LOADMK is enabled 0 1 0 2015-01-14 Michal Simek monstr New
[U-Boot] serial: zynq: Use global baudrate instead of hardcoded one 0 0 0 2015-01-14 Michal Simek monstr New
[U-Boot,2/2] microblaze: Support stack protection feature 0 0 0 2015-01-14 Michal Simek monstr New
[U-Boot,1/2] microblaze: Enable hardware exception by default 0 0 0 2015-01-14 Michal Simek monstr New
[U-Boot,2/3] configs: zynq: Add config support for ZYBO 0 0 0 2014-08-28 Peter Crosthwaite monstr New
[U-Boot,1/3] arm: dts: zynq: Add digilent ZYBO board dts 1 0 0 2014-08-28 Peter Crosthwaite monstr New
[U-Boot] arm: zynq: Add compile time boot mode override 0 0 0 2014-08-20 Peter Crosthwaite monstr New
[U-Boot,2/2] ARM: zynq: Remove spl.h 0 1 0 2014-08-11 Michal Simek monstr New
[U-Boot,1/2] ARM: zynq: Move ps7_init() out of spl.h 0 1 0 2014-08-11 Michal Simek monstr New
[U-Boot] zynq: spl: Add vectors section to linker script 0 0 1 2014-08-07 Peter Crosthwaite monstr New
[U-Boot] zynq: spl: Add vectors section to linker script 0 0 1 2014-08-04 Peter Crosthwaite monstr New
[U-Boot] Xilinx Zed Board resets with Master 0 0 0 2014-03-28 Tim Sander monstr New
[U-Boot] Xilinx Zed Board resets with Master 0 0 0 2014-03-27 Michal Simek monstr New
[U-Boot] Xilinx Zed Board resets with Master 0 0 0 2014-03-27 Michal Simek monstr New
[U-Boot] mmc_spi: Big-endian support 0 0 0 2015-06-01 Yoshinori Sato panto New
[U-Boot,7/7,V5] powerpc/esdhc: Update esdhc command execution process 0 0 0 2013-12-30 Haijun.Zhang panto New
[U-Boot,6/7,V5] Powerpc/esdhc: Add esdhc host version define 0 0 0 2013-12-30 Haijun.Zhang panto New
[U-Boot,5/7,V5] mmc: Enhance mmcinfo command 0 0 0 2013-12-30 Haijun.Zhang panto New
[U-Boot,4/7,V5] mmc: Update the handling of returned erase block 0 0 0 2013-12-30 Haijun.Zhang panto New
[U-Boot,3/7,V5] mmc: Enhance erase handling procedure 0 0 0 2013-12-30 Haijun.Zhang panto New
[U-Boot,2/7,V5] mmc: Get secure erase information from card 0 0 0 2013-12-30 Haijun.Zhang panto New
[U-Boot,1/7,V5] mmc: Add some usefull macro definition 0 0 0 2013-12-30 Haijun.Zhang panto New
[U-Boot] fsl_esdhc: Add Auto command 12 interrupt bit detecting 0 0 0 2013-10-12 Haijun.Zhang panto New
[U-Boot,v1,12/12] arm: mvebu: db-88f6820: Add SPL support with DDR init code 0 0 0 2015-06-03 Stefan Roese prafulla@marvell.com New
[U-Boot,v1,11/12] arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr 0 0 0 2015-06-03 Stefan Roese prafulla@marvell.com New
[U-Boot,v1,10/12] arm: mvebu: drivers/ddr: Move Armada XP DDR init code into new directory 0 0 0 2015-06-03 Stefan Roese prafulla@marvell.com New
[U-Boot,v1,09/12] arm: mvebu: Add Armada 38x SERDES / PHY init code from Marvell bin_hdr 0 0 0 2015-06-03 Stefan Roese prafulla@marvell.com New
[U-Boot,v1,08/12] arm: mvebu: serdes: Move Armada XP SERDES / PHY init code into new directory 0 0 0 2015-06-03 Stefan Roese prafulla@marvell.com New
[U-Boot,v1,07/12] Makefile: Fix mvebu build target to use SPL load and exe-address 0 0 0 2015-06-03 Stefan Roese prafulla@marvell.com New
[U-Boot,v1,06/12] arm: mvebu: Disable L2 cache before enabling d-cache 0 0 0 2015-06-03 Stefan Roese prafulla@marvell.com New
[U-Boot,v1,05/12] arm: mvebu: Disable MMU before changing register base address 0 0 0 2015-06-03 Stefan Roese prafulla@marvell.com New
[U-Boot,v1,04/12] arm: mvebu: spl.c: Add call to board_early_init_f() 0 0 0 2015-06-03 Stefan Roese prafulla@marvell.com New
[U-Boot,v1,03/12] arm: mvebu: Use default reg base address for SPL on A38x 0 0 0 2015-06-03 Stefan Roese prafulla@marvell.com New
[U-Boot,v1,02/12] tools/kwboot: Add parameters to set delay and timeout via cmdline 0 0 0 2015-06-03 Stefan Roese prafulla@marvell.com New
[U-Boot] tools/kwboot: Add parameters to set delay and timeout via cmdline 0 0 0 2015-05-29 Stefan Roese prafulla@marvell.com New
[U-Boot,v3,4/4] db-88f6820-gp.h: Load data blobs into lower memory 1 0 0 2015-05-18 Kevin Smith prafulla@marvell.com New
[U-Boot,v3,3/4] mv-common.h: Include support for device trees 1 0 0 2015-05-18 Kevin Smith prafulla@marvell.com New
[U-Boot,v3,2/4] arm: mvebu: Update CBAR with SOC regs base 1 0 0 2015-05-18 Kevin Smith prafulla@marvell.com New
[U-Boot,v3,1/4] arm: mvebu: Disable L2 cache before enabling d-cache 0 0 1 2015-05-18 Kevin Smith prafulla@marvell.com New
[U-Boot] arm: mvebu: Remove "u-boot.kwb" CONFIG_BUILD_TARGET for non-SPL targets 0 1 0 2015-05-04 Stefan Roese prafulla@marvell.com New
[U-Boot,RESEND,v3,13/13] arm: mvebu: Add Armada A38x DB-88F6820-GP board support 0 0 2 2015-04-25 Stefan Roese prafulla@marvell.com New
[U-Boot,RESEND,v3,12/13] arm: mvebu: Add d-cache invalidate before enabling the d-cache 0 0 2 2015-04-25 Stefan Roese prafulla@marvell.com New
[U-Boot,RESEND,v3,11/13] arm: mvebu: mv-common.h: Add CONFIG_PREBOOT 0 0 2 2015-04-25 Stefan Roese prafulla@marvell.com New
[U-Boot,RESEND,v3,10/13] arm: mvebu: Remove coherency configuration 0 0 2 2015-04-25 Stefan Roese prafulla@marvell.com New
[U-Boot,RESEND,v3,09/13] arm: mvebu: Change network init code to allow a more flexible setup 1 0 2 2015-04-25 Stefan Roese prafulla@marvell.com New
[U-Boot,RESEND,v3,08/13] arm: mvebu: Add basic Armada 38x support 0 0 2 2015-04-25 Stefan Roese prafulla@marvell.com New