| [U-Boot,v4,09/10] i2c, ppc4xx_i2c: switch to new multibus/multiadapter support |
2013-05-18 |
Heiko Schocher |
hs |
Under Review |
| [U-Boot,v4,02/10] i2c: common changes for multibus/multiadapter support |
2013-05-18 |
Heiko Schocher |
hs |
Under Review |
| [U-Boot,v4,07/10] tegra: i2c: Add function to know about current bus |
2013-05-18 |
Heiko Schocher |
hs |
Under Review |
| [U-Boot,v4,03/10] i2c, soft-i2c: switch to new multibus/multiadapter support |
2013-05-18 |
Heiko Schocher |
|
New |
| [U-Boot,v2] common, menu: do not timeout again if an item was selected but not found |
2012-01-18 |
Heiko Schocher |
vapier |
New |
| [U-Boot,1/4,v2] Add TPL and P1021MDS board support |
2011-02-07 |
Haiying Wang |
afleming |
New |
| [U-Boot] p1020rdb-pd: platform support |
2013-04-28 |
Haijun.Zhang |
afleming |
New |
| [U-Boot,2/2] cmd_sf: "sf update" preserve the final part of the last sector |
2012-04-03 |
Gerlando Falauto |
vapier |
New |
| [U-Boot,1/2] cmd_sf: let "sf update" erase last sector as a whole |
2012-04-03 |
Gerlando Falauto |
vapier |
New |
| [U-Boot,v3,08/10] MIPS: qemu-malta: bring up ethernet |
2013-05-22 |
Gabor Juhos |
danielschwierzeck |
Under Review |
| [U-Boot,v3,02/10] MIPS: qemu-malta: add reset support |
2013-05-22 |
Gabor Juhos |
danielschwierzeck |
Under Review |
| [U-Boot,v3,09/10] MIPS: bootm.c: add YAMON style Linux preparation/jump code |
2013-05-22 |
Gabor Juhos |
danielschwierzeck |
Under Review |
| [U-Boot,v3,05/10] MIPS: qemu-malta: setup GT64120 registers as done by YAMON |
2013-05-22 |
Gabor Juhos |
danielschwierzeck |
Under Review |
| [U-Boot,v3,04/10] MIPS: import gt64120.h header from Linux |
2013-05-22 |
Gabor Juhos |
danielschwierzeck |
Under Review |
| [U-Boot,v3,10/10] MIPS: start.S: emulate REVISION register for qemu-malta |
2013-05-22 |
Gabor Juhos |
danielschwierzeck |
Under Review |
| [U-Boot,v3,01/10] MIPS: qemu-malta: add support for emulated MIPS Malta board |
2013-05-22 |
Gabor Juhos |
danielschwierzeck |
Under Review |
| [U-Boot,v3,03/10] MIPS: qemu-malta: enable flash support |
2013-05-22 |
Gabor Juhos |
danielschwierzeck |
Under Review |
| [U-Boot] MIPS: fix __raw_* IO accessors |
2013-02-21 |
Gabor Juhos |
danielschwierzeck |
Under Review |
| [U-Boot,v3,06/10] MIPS: qemu-malta: add PCI support |
2013-05-22 |
Gabor Juhos |
danielschwierzeck |
Under Review |
| [U-Boot,v3,07/10] net: pcnet: use pci_virt_to_mem to obtain buffer addresses |
2013-05-22 |
Gabor Juhos |
danielschwierzeck |
Under Review |
| [U-Boot,2/2] u-boot/drivers/net/designware with cache support. |
2013-01-22 |
Frank Dols |
jhersh |
New |
| [U-Boot,1/2] drivers/net/designware, do an explicit memory access instead of implicit, re-written assignments to use readl() and writel(), all of this as preperation for making the driver able to work in a cached environment (I$D$ support). |
2013-01-22 |
Frank Dols |
jhersh |
New |
| [U-Boot,4/6] README: mxs: Introduce README.mxs |
2013-05-03 |
Fabio Estevam |
sbabic |
New |
| [U-Boot] mx23: Add a README file |
2013-05-03 |
Fabio Estevam |
sbabic |
New |
| [U-Boot,3/9] mx51evk: Return error if the SDHC port index is invalid |
2013-05-21 |
Fabio Estevam |
|
New |
| [U-Boot,6/9] mx53smd: Return error if the SDHC port index is invalid |
2013-05-21 |
Fabio Estevam |
|
New |
| [U-Boot,9/9] mx6qsabresd: Return error if the SDHC port index is invalid |
2013-05-21 |
Fabio Estevam |
|
New |
| [U-Boot] mx6: Fix the reading of CPU revision |
2013-03-26 |
Fabio Estevam |
sbabic |
New |
| [U-Boot] powerpc: Use lower case for the core names |
2013-04-21 |
Fabio Estevam |
afleming |
New |
| [U-Boot,2/9] mx53loco: Return error if the SDHC port index is invalid |
2013-05-21 |
Fabio Estevam |
|
New |
| [U-Boot,8/9] mx6qsabrelite: Return error if the SDHC port index is invalid |
2013-05-21 |
Fabio Estevam |
|
New |
| [U-Boot,4/9] mx53ard: Return error if the SDHC port index is invalid |
2013-05-21 |
Fabio Estevam |
|
New |
| [U-Boot,1/9] wandboard: Return error if the SDHC port index is invalid |
2013-05-21 |
Fabio Estevam |
|
New |
| [U-Boot,3/6] README: mx28_common: Fix structure of sentence |
2013-05-03 |
Fabio Estevam |
sbabic |
New |
| [U-Boot,2/6] README: mx28_common: Do not hardcode the SSP port |
2013-05-03 |
Fabio Estevam |
sbabic |
New |
| [U-Boot,1/6] README: mx28_common: Keep the text within 80 columns |
2013-05-03 |
Fabio Estevam |
sbabic |
New |
| [U-Boot,5/9] mx53evk: Return error if the SDHC port index is invalid |
2013-05-21 |
Fabio Estevam |
|
New |
| [U-Boot,7/9] mx6qarm2: Return error if the SDHC port index is invalid |
2013-05-21 |
Fabio Estevam |
|
New |
| [U-Boot] i.MX6: consolidate pad names for multi-CPU boards |
2013-02-14 |
Eric Nelson |
sbabic |
New |
| [U-Boot] video: exynos: Change mipi dsi write function parameters correctly |
2013-05-08 |
Donghwa Lee |
prom |
New |
| [U-Boot] S5P: adds s6e63m0 amoled display driver |
2010-09-14 |
Donghwa Lee |
ag |
Under Review |
| [U-Boot] video: exynos: remove unused variable of exynos_mipi_dsi_wr_data() |
2013-05-08 |
Donghwa Lee |
prom |
New |
| [U-Boot] Fix handling of some broken test expressions |
2012-11-15 |
Domenico Andreoli |
trini |
New |
| [U-Boot,01/11] powerpc/ppc4xx: Add generic accessor functions for gdsys FPGA |
2013-04-22 |
Dirk Eibach |
stroese |
New |
| [U-Boot,v5,5/7] Add Atmel I2C tpm |
2013-04-30 |
Dirk Eibach |
afleming |
New |
| [U-Boot,v5,4/7] i2c: fsl_i2c: i2c_read(): dont try to write address w/ alen=0 |
2013-04-30 |
Dirk Eibach |
afleming |
New |
| [U-Boot,v5,3/7] mpc85xx: Add CONFIG_RELEASE_CORE0_ONLY |
2013-04-30 |
Dirk Eibach |
afleming |
New |
| [U-Boot,v5,1/7] Update gdsys email account |
2013-04-30 |
Dirk Eibach |
afleming |
New |
| [U-Boot,v5,7/7] mpc85xx: Add gdsys ControlCenter Digital board |
2013-04-30 |
Dirk Eibach |
afleming |
New |
| [U-Boot,v5,2/7] tpm: add AUTH1 cmds for LoadKey2 and GetPubKey |
2013-04-30 |
Dirk Eibach |
afleming |
New |
| [U-Boot,09/11] powerpc/ppc4xx: Increase timeout for gdsys mclink bus startup |
2013-04-22 |
Dirk Eibach |
stroese |
New |
| [U-Boot,v5,6/7] Build arch/$ARCH/lib/bootm.o depending on CONFIG_CMD_BOOTM |
2013-04-30 |
Dirk Eibach |
afleming |
New |
| [U-Boot,11/11] powerpc/ppc4xx: Remove CONFIG_SYS_FLASH_PROTECTION from gdsys boards |
2013-04-22 |
Dirk Eibach |
stroese |
New |
| [U-Boot,07/11] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards |
2013-04-22 |
Dirk Eibach |
stroese |
New |
| [U-Boot,03/11] powerpc/ppc4xx: Add fpgad command for dumping gdsys fpga registers |
2013-04-22 |
Dirk Eibach |
stroese |
New |
| [U-Boot,02/11] powerpc/ppc4xx: Add gdsys mclink interface |
2013-04-22 |
Dirk Eibach |
stroese |
New |
| [U-Boot,10/11] powerpc/ppc4xx: Consider gdsys FPGA OSD size |
2013-04-22 |
Dirk Eibach |
stroese |
New |
| [U-Boot,08/11] powerpc/ppc4xx: Fixup phy erratum on gdsys iocon hardware |
2013-04-22 |
Dirk Eibach |
stroese |
New |
| [U-Boot,06/11] powerpc/ppc4xx: Support gdsys multichannel iocon hardware |
2013-04-22 |
Dirk Eibach |
stroese |
New |
| [U-Boot,05/11] powerpc/ppc4xx: Use generic FPGA accessors in gdsys common code |
2013-04-22 |
Dirk Eibach |
stroese |
New |
| [U-Boot,04/11] powerpc/ppc4xx: Add bitbang i2c interface for gdsys boards |
2013-04-22 |
Dirk Eibach |
stroese |
New |
| [U-Boot] spi: mxc_spi: Fix pre and post divider calculation |
2013-05-02 |
Dirk Behme |
sbabic |
New |
| [U-Boot,2/2] spi: mxc_spi: Update pre and post divider algorithm |
2013-05-09 |
Dirk Behme |
sbabic |
New |
| [U-Boot,v2,1/2] spi: mxc_spi: Fix pre and post divider calculation |
2013-05-09 |
Dirk Behme |
sbabic |
New |
| [U-Boot,v2] spi: mxc_spi: Set master mode for all channels |
2013-05-01 |
Dirk Behme |
sbabic |
New |
| [U-Boot,v2] spi: mxc_spi: Update pre and post divider algorithm |
2013-05-11 |
Dirk Behme |
prom |
New |
| [U-Boot,RFC] ARM: byteorder: add optimized swab16 and swab32 |
2013-05-10 |
Dirk Behme |
aaribaud |
New |
| [U-Boot,v0] mmc: forced sector mode when accessing OCR register |
2012-11-29 |
Davide Bonfanti |
afleming |
New |
| [U-Boot,v2] PHY: micrel.c: add support for KSZ9031 |
2013-02-06 |
David Andrey |
jhersh |
New |
| [U-Boot] MIPS: bootm.c: drop obsolete Qemu specific bootm implementation |
2013-01-12 |
Daniel Schwierzeck |
danielschwierzeck |
Under Review |
| [U-Boot] FSL SPI read fix. |
2012-09-26 |
Dale Smith |
galak |
New |
| [U-Boot] fsl espi: Fix reading from device |
2012-09-26 |
Dale P. Smith |
galak |
New |
| [U-Boot,v3] tpm: Add TPM command library |
2013-02-28 |
Che-liang Chiou |
trini |
New |
| [U-Boot] add support for Xilinx 1000BASE-X phy (GTX) |
2013-02-21 |
Charles Coldwell |
jhersh |
New |
| [U-Boot,v2] mmc: fix env in mmc with redundant compile error |
2013-05-15 |
Bo Shen |
afleming |
New |
| [U-Boot,3/3] net: macb: add support for gigabit MAC |
2013-04-24 |
Bo Shen |
jhersh |
New |
| [U-Boot,1/3] net: macb: using AT91FAMILY replace #ifdeferry |
2013-04-24 |
Bo Shen |
jhersh |
New |
| [U-Boot,v2,3/3] ARM: at91sam9n12: add network support with ksz8851_16mll |
2013-04-24 |
Bo Shen |
jhersh |
New |
| [U-Boot,v2,1/3] checkpatch: add ignore for network block comment style checking |
2013-04-24 |
Bo Shen |
jhersh |
New |
| [U-Boot,2/3] net: macb: using phylib to configure phy device |
2013-04-24 |
Bo Shen |
jhersh |
New |
| [U-Boot,v2,2/3] net: ks8851_mll: add ethernet support |
2013-04-24 |
Bo Shen |
jhersh |
New |
| [U-Boot] exynos: Adjust the starting MIF voltage to 1.05v |
2013-04-15 |
Bernie Thompson |
prom |
New |
| [U-Boot,1/7] JFFS2: Bug fix for summary support |
2011-04-24 |
Baidu Boy |
dzu |
New |
| [U-Boot,7/7] JFFS2: reduce number of read operations |
2011-04-24 |
Baidu Boy |
dzu |
New |
| [U-Boot,5/7] JFFS2: Change DEFAULT_EMPTY_SCAN_SIZE to 256 Bytes |
2011-04-24 |
Baidu Boy |
dzu |
New |
| [U-Boot,6/7] JFFS2: scanning performance improvement |
2011-04-24 |
Baidu Boy |
dzu |
New |
| [U-Boot,3/7] JFFS2: Calculate buf_len before we read data from flash |
2011-04-24 |
Baidu Boy |
dzu |
New |
| [U-Boot,4/7] JFFS2: Improve error checking |
2011-04-24 |
Baidu Boy |
dzu |
New |
| [U-Boot,2/7] JFFS2: Change allocated buffer size |
2011-04-24 |
Baidu Boy |
dzu |
New |
| [U-Boot,v2,1/2] ARM: arm720t: Add missing CONFIG_SKIP_LOWLEVEL_INIT guard for cpu_init_crit |
2013-05-21 |
Axel Lin |
tomcwarren |
New |
| [U-Boot,v2,2/2] tegra: Define CONFIG_SKIP_LOWLEVEL_INIT for SPL build |
2013-05-21 |
Axel Lin |
tomcwarren |
New |
| [U-Boot,v4,2/2] board: add support for amcore board |
2013-01-23 |
Angelo Dureghello |
jasonjin |
New |
| [U-Boot,v6,2/2] board: add support for amcore board |
2013-01-26 |
Angelo Dureghello |
jasonjin |
New |
| [U-Boot,v4,1/2] m68k: add support for mcf5307 cpu |
2013-01-22 |
Angelo Dureghello |
jasonjin |
New |
| [U-Boot,1/5] arch/powerpc/cpu/mpc8xxx: PAMU driver support |
2013-05-22 |
Andy Fleming |
|
New |
| [U-Boot,v03,1/2] OMAP3+: introduce generic ABB support |
2013-05-21 |
Andrii Tseglytskyi |
|
New |
| [U-Boot,v03,2/2] OMAP5: add ABB setup for MPU voltage domain |
2013-05-21 |
Andrii Tseglytskyi |
|
New |
| [U-Boot,v02,2/2] OMAP5: add ABB setup for MPU voltage domain |
2013-05-13 |
Andrii Tseglytskyi |
trini |
New |
| [U-Boot] ARM: cfi_flash: Fix unaligned accesses to cfi_qry structure |
2013-04-29 |
Andrew Gabbasov |
stroese |
New |
| [U-Boot,v2] cfi_flash: Fix unaligned accesses to cfi_qry structure |
2013-05-14 |
Andrew Gabbasov |
stroese |
New |