| [U-Boot,5/6] Exynos: Exynos4x10: add sysreg structure for exynos4x10 |
2012-10-12 |
Piotr Wilczek |
prom |
New |
| [U-Boot,v2,9/9] Add a maintainer entry for the Trats2 board. |
2013-04-04 |
Piotr Wilczek |
prom |
New |
| [U-Boot,4/5] DRIVERS: I2C: Modify I2C driver for EXYNOS4 |
2012-09-24 |
Piotr Wilczek |
prom |
Under Review |
| [U-Boot,6/6] arm: trats: Use exynos4x10 structures on Trats board |
2012-10-12 |
Piotr Wilczek |
prom |
New |
| [U-Boot,3/4] pmic: max77693: add defines for safeout 1 and 2 |
2013-04-10 |
Piotr Wilczek |
prafulla@marvell.com |
New |
| [U-Boot] drivers:power:max77693: add support for new multi function pmic max77693 |
2013-05-21 |
Piotr Wilczek |
|
New |
| [U-Boot,v3,04/12] i2c:multi_i2c: adapt file to new i2c framework |
2013-05-17 |
Piotr Wilczek |
prom |
Under Review |
| [U-Boot,5/5] DRIVERS: MISC: PMIC: Modify pmic driver to support multibus I2C |
2012-09-24 |
Piotr Wilczek |
prom |
Under Review |
| [U-Boot,4/4] trats2: enable ums support on Trats2 |
2013-04-10 |
Piotr Wilczek |
prafulla@marvell.com |
New |
| [U-Boot,2/6] Exynos: Exynos4x10: Add clock structure for exynos4x10 |
2012-10-12 |
Piotr Wilczek |
prom |
New |
| [U-Boot,2/5] EXYNOS: Add Exynos4 I2C spacing |
2012-09-24 |
Piotr Wilczek |
prom |
Under Review |
| [U-Boot,v2,1/2] imx: Complete the pin definitions for the i.MX6DL / i.MX6Solo |
2013-04-22 |
Pierre Aubert |
sbabic |
Under Review |
| [U-Boot,v2,2/2] imx: Add support for the SabreSD shipped with i.MX6DL |
2013-04-22 |
Pierre Aubert |
sbabic |
Under Review |
| [U-Boot] sh: Add support for SH2A freestanding build |
2011-06-01 |
Phil Edworthy |
iwamatsu |
New |
| [U-Boot] tpm: add AUTH1 cmds for LoadKey2 and GetPubKey |
2013-04-11 |
Pfau, Reinhard |
trini |
New |
| [U-Boot,PATCHv3,6/6] am335x: enable falcon boot mode for mmc (raw and fat) and nand |
2013-05-13 |
Peter Korsgaard |
trini |
New |
| [U-Boot,PATCHv3,4/6] spl_mmc: mmc_load_image_raw(): Add sector argument |
2013-05-13 |
Peter Korsgaard |
trini |
New |
| [U-Boot,PATCHv3,1/6] spl_mmc: return error from mmc_load_image_{raw, fat} rather than hanging |
2013-05-13 |
Peter Korsgaard |
trini |
New |
| [U-Boot,PATCHv3,5/6] spl_mmc: add Falcon mode support for raw variant |
2013-05-13 |
Peter Korsgaard |
trini |
New |
| [U-Boot,PATCHv3,3/6] spl_mmc: add Falcon mode support for FAT variant |
2013-05-13 |
Peter Korsgaard |
trini |
New |
| [U-Boot,PATCHv3,2/6] spl_mmc: mmc_load_image_fat(): Add filename argument and move fat init out |
2013-05-13 |
Peter Korsgaard |
trini |
New |
| [U-Boot,U-BOOT,1/1] smdk2410:coding style cleanup |
2011-05-30 |
Peter Kong |
prom |
Under Review |
| [U-Boot,v3,2/2] Use loop block device in sandbox board |
2012-09-05 |
Pavel Herrmann |
trini |
New |
| [U-Boot] mmc: Add an mmcsilent option |
2012-11-29 |
Pantelis Antoniou |
afleming |
New |
| [U-Boot,2/2] power: exynos-tmu: use the mux_addr bit fields in tmu_control register |
2013-04-05 |
Naveen Krishna Ch |
prom |
New |
| [U-Boot] fdtdec: Add compatible string for High speed i2c |
2013-04-29 |
Naveen Krishna Ch |
hs |
Under Review |
| [U-Boot,1/2] power: exynos-tmu: fix warnings and clean up code |
2013-04-05 |
Naveen Krishna Ch |
prom |
New |
| [U-Boot] powpc/mpc85xx: explicit cast the SDRAM size to type phys_size_t |
2013-04-12 |
Mingkai Hu |
afleming |
New |
| [U-Boot] powerpc/mpc85xx: explicit cast the SDRAM size to type phys_size_t |
2013-04-12 |
Mingkai Hu |
afleming |
New |
| [U-Boot,v2] fsl_ifc: add support for different IFC bank count |
2013-05-16 |
Mingkai Hu |
afleming |
New |
| [U-Boot,V3,1/2] mtd/spi/spi_flash: support CMD_READ_ID=0x90 case |
2012-07-09 |
Mikhail Kshevetskiy |
vapier |
Under Review |
| [U-Boot] ppc460: read get_sys_info from CPR registers instead of STRP registers |
2011-07-21 |
Mike Williams |
stroese |
Under Review |
| [U-Boot,1/2] add ST PSD4256G6V to table of supported legacy flashs |
2012-07-31 |
Mike Frysinger |
vapier |
New |
| [U-Boot] tools/env: check flash length before probing |
2012-04-05 |
Mike Frysinger |
jhersh |
New |
| [U-Boot,RESEND] arm: bootm: call udc_disable() before booting linux |
2013-04-20 |
Mike Dunn |
aaribaud |
New |
| [U-Boot,10/12] microblaze: Call serial multi initialization |
2012-07-09 |
Michal Simek |
monstr |
New |
| [U-Boot,2/4] board: xilinx: Remove common folder |
2013-01-23 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,09/15] zynq: Move macros to hardware.h |
2013-04-23 |
Michal Simek |
monstr |
New |
| [U-Boot,12/12] microblaze: board: Use bi_flashstart instead of CONFIG_SYS_FLASH_BASE |
2012-07-09 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,07/15] net: gem: Do not initialize BDs again |
2013-04-23 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,10/15] net: gem: Pass phy address to init |
2013-04-23 |
Michal Simek |
monstr |
New |
| [U-Boot,09/12] microblaze: timer: Add device-tree driver configuration |
2012-07-09 |
Michal Simek |
monstr |
New |
| [U-Boot,v3,1/9] fpga: Clean coding style |
2013-05-03 |
Michal Simek |
aaribaud |
New |
| [U-Boot,07/12] microblaze: Move __udelay implementation |
2012-07-09 |
Michal Simek |
monstr |
New |
| [U-Boot,v3,6/9] cmd: fpga: Do not include net.h |
2013-05-03 |
Michal Simek |
aaribaud |
New |
| [U-Boot,4/4] microblaze: Remove FSL support from generic board |
2013-01-23 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,03/15] zynq: Move scutimer baseaddr to hardware.h |
2013-04-23 |
Michal Simek |
monstr |
New |
| [U-Boot,v3,3/9] cmd: fpga: Clean coding style |
2013-05-03 |
Michal Simek |
aaribaud |
New |
| [U-Boot,v3,5/9] fpga: Change the first parameter in fpga_loadbitstream |
2013-05-03 |
Michal Simek |
aaribaud |
New |
| [U-Boot,v2,11/15] net: gem: Preserve clk on emio interface |
2013-04-23 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,12/15] net: gem: Add support for phy autodetection |
2013-04-23 |
Michal Simek |
monstr |
New |
| [U-Boot,03/12] microblaze: intc: Clear interrupt code |
2012-07-09 |
Michal Simek |
monstr |
New |
| [U-Boot,04/12] microblaze: intc: Registering interrupt should return value |
2012-07-09 |
Michal Simek |
monstr |
New |
| [U-Boot,v3,9/9] fpga: Remove all CONFIG_SYS_* fpga related options |
2013-05-03 |
Michal Simek |
aaribaud |
New |
| [U-Boot,01/12] microblaze: board: Remove compilation warning |
2012-07-09 |
Michal Simek |
monstr |
New |
| [U-Boot,4/4] microblaze: Fix compilation failure because of missing libdts |
2012-10-05 |
Michal Simek |
monstr |
New |
| [U-Boot] Pull request - zynq |
2013-04-30 |
Michal Simek |
aaribaud |
New |
| [U-Boot,3/4] microblaze: Flush caches before enabling them |
2012-10-05 |
Michal Simek |
monstr |
New |
| [U-Boot,2/4] microblaze: Fix byteorder for microblaze |
2012-10-05 |
Michal Simek |
monstr |
New |
| [U-Boot,11/12] microblaze: Clean microblaze initialization |
2012-07-09 |
Michal Simek |
monstr |
New |
| [U-Boot,5/5] microblaze: Wire up fdt emaclite initialization |
2012-06-29 |
Michal Simek |
monstr |
New |
| [U-Boot,08/12] microblaze: timer: Prepare for device-tree initialization |
2012-07-09 |
Michal Simek |
monstr |
New |
| [U-Boot,3/5] microblaze: Add support for device tree driven board configuration |
2012-06-29 |
Michal Simek |
monstr |
New |
| [U-Boot,v3,2/9] fpga: Fix debug message compilation error |
2013-05-03 |
Michal Simek |
aaribaud |
New |
| [U-Boot,v3,8/9] fpga: Check device name against bitstream name |
2013-05-03 |
Michal Simek |
aaribaud |
New |
| [U-Boot,v2,13/15] mmc: Add support for Xilinx Zynq sdhci controller |
2013-04-23 |
Michal Simek |
monstr |
New |
| [U-Boot,06/12] microblaze: intc: Add device-tree driver configuration |
2012-07-09 |
Michal Simek |
monstr |
New |
| [U-Boot,1/4] microblaze: Fix compilation warning in ext2_find_next_zero_bit |
2012-10-05 |
Michal Simek |
monstr |
New |
| [U-Boot,RFC] arm: lds: Remove libgcc eabi exception handling tables |
2013-05-13 |
Michal Simek |
aaribaud |
New |
| [U-Boot,1/8] microblaze: Do not select NFS for platforms without ethernet |
2011-08-31 |
Michal Simek |
monstr |
New |
| [U-Boot] net: phy: Define Marvell 88e1518 phy |
2013-01-23 |
Michal Simek |
jhersh |
New |
| [U-Boot,v2,1/2] microblaze: bootm: Fix coding style issues |
2013-05-06 |
Michal Simek |
monstr |
New |
| [U-Boot,v3,4/9] cmd: fpga: Move fpga_loadbitstream to fpga.c |
2013-05-03 |
Michal Simek |
aaribaud |
New |
| [U-Boot,v2,14/15] i2c: zynq: Add support for Xilinx Zynq |
2013-04-23 |
Michal Simek |
monstr |
New |
| [U-Boot] spi: xilinx_spi: Perform software reset during slave setup |
2013-01-23 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,15/15] fpga: Add support for loading bitstream for Xilinx Zynq |
2013-04-23 |
Michal Simek |
monstr |
New |
| [U-Boot,v2] gpio: Add support for microblaze xilinx GPIO |
2013-05-03 |
Michal Simek |
monstr |
New |
| [U-Boot,1/4] board: xilinx: Remove unused ancient i2c driver |
2013-01-23 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,2/2] microblaze: bootm: Add support for loading initrd |
2013-05-06 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,01/15] arm: zynq: U-Boot udelay < 1000 FIX |
2013-04-23 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,4/4] watchdog: Add support for Xilinx Microblaze watchdog |
2013-04-23 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,02/15] arm: zynq: Rename XPSS_ prefix to ZYNQ_ for hardcoded SoC addresses |
2013-04-23 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,06/15] net: gem: Simplify return path in zynq_gem_recv |
2013-04-23 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,2/4] microblaze: Enable netconsole |
2013-04-23 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,04/15] net: phy: Define Marvell 88e1518 phy |
2013-04-23 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,3/4] microblaze: Disable all cpu features before reset |
2013-04-23 |
Michal Simek |
monstr |
New |
| [U-Boot] microblaze: Add muldi3.c which contains routines for _muldi3 |
2013-01-23 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,05/15] net: gem: Remove WRAP bit from TX buffer description |
2013-04-23 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,08/15] net: gem: Fix gem driver on 1Gbps LAN |
2013-04-23 |
Michal Simek |
monstr |
New |
| [U-Boot,3/4] common: cmd_bdinfo: Fix compilation warning for microblaze |
2013-01-23 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,1/4] microblaze: Fix reset function |
2013-04-23 |
Michal Simek |
monstr |
New |
| [U-Boot,8/8] microblaze: Enable phylib support |
2011-08-31 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,5/7] microblaze: timer: Prepare for device-tree initialization |
2012-08-06 |
Michal Simek |
vapier |
New |
| [U-Boot] microblaze: Call spi_init function |
2012-08-10 |
Michal Simek |
monstr |
New |
| [U-Boot] phy: Add support for Marvell 88E1118R |
2012-08-07 |
Michal Simek |
jhersh |
New |
| [U-Boot,v3,7/9] fpga: zynq: Add support for loading bitstream |
2013-05-03 |
Michal Simek |
aaribaud |
New |
| [U-Boot,v2,4/7] microblaze: intc: Coding style cleanup |
2012-08-06 |
Michal Simek |
vapier |
New |
| [U-Boot,2/8] microblaze: Remove address offset for uart16550 |
2011-08-31 |
Michal Simek |
monstr |
New |
| [U-Boot,RFC] arm: lds: Remove libgcc eabi exception handling tables |
2013-05-09 |
Michal Simek |
aaribaud |
New |
| [U-Boot,V2,OMAP-ULPI] : This patch fix the omap access to the transceiver configuration registers using the ulpi bus. |
2013-05-20 |
Michael Trimarchi |
|
New |