| [U-Boot,3/5] microblaze: Add support for device tree driven board configuration |
2012-06-29 |
Michal Simek |
monstr |
New |
| [U-Boot,3/5] drivers/sec : Freescale SEC driver |
2013-03-28 |
Ruchika Gupta |
afleming |
New |
| [U-Boot,3/5] arm: make relocation symbols compiler-generated |
2013-05-14 |
Albert ARIBAUD |
aaribaud |
New |
| [U-Boot,3/5] EXYNOS: PINMUX: Add pinmux support for i2c |
2012-09-24 |
Piotr Wilczek |
prom |
Under Review |
| [U-Boot,3/5,v5] board/p1010rdb:Add NAND boot support using new SPL format |
2013-04-16 |
Prabhakar Kushwaha |
afleming |
New |
| [U-Boot,3/4] smdk5250: enable support for tmu throttling |
2013-04-03 |
Akshay Saraswat |
prom |
New |
| [U-Boot,3/4] sf: Add extended address access support |
2013-02-23 |
Jagannadha Sutradharudu Teki |
trini |
New |
| [U-Boot,3/4] power: Explicitly select pmic device's bus |
2013-04-02 |
Simon Glass |
prom |
New |
| [U-Boot,3/4] pmic: max77693: add defines for safeout 1 and 2 |
2013-04-10 |
Piotr Wilczek |
prafulla@marvell.com |
New |
| [U-Boot,3/4] nand_spl/spiboot/sdboot: Add ability to have smaller middle loader |
2011-06-02 |
Matthew McClintock |
afleming |
New |
| [U-Boot,3/4] microblaze: Flush caches before enabling them |
2012-10-05 |
Michal Simek |
monstr |
New |
| [U-Boot,3/4] common: cmd_bdinfo: Fix compilation warning for microblaze |
2013-01-23 |
Michal Simek |
monstr |
New |
| [U-Boot,3/4] arm: make relocation section symbols compiler-generated |
2013-05-10 |
Albert ARIBAUD |
aaribaud |
New |
| [U-Boot,3/4] EXYNOS4210: Configure GPIO for uart |
2013-04-25 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,3/4] ELPPC: Don't write magic numbers via short. |
2013-05-13 |
Tom Rini |
trini |
New |
| [U-Boot,3/4,v2] smdk5250: enable support for tmu throttling |
2013-05-13 |
Akshay Saraswat |
prom |
New |
| [U-Boot,3/4,V5] S5P: Serial: Add fdt support to driver |
2013-05-17 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,3/4,V4] S5P: Serial: Add fdt support to driver |
2013-04-02 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,3/3] usb: Correct CLEAR_FEATURE code in ehci-hcd |
2013-05-11 |
Simon Glass |
marex |
New |
| [U-Boot,3/3] net: macb: add support for gigabit MAC |
2013-04-24 |
Bo Shen |
jhersh |
New |
| [U-Boot,3/3] microblaze: Wire up OF support for emaclite |
2012-07-04 |
Stephan Linz |
monstr |
Under Review |
| [U-Boot,3/3] exynos5250: Add arndale board support |
2013-03-26 |
Inderpal Singh |
prom |
Under Review |
| [U-Boot,3/3] arm/km: add support for kmsuv31 board |
2013-01-16 |
Holger Brunck |
prafulla@marvell.com |
New |
| [U-Boot,3/3] Tegra: Config: Enable Tegra30/Tegra114 USB function |
2013-04-29 |
Jim Lin |
tomcwarren |
Under Review |
| [U-Boot,3/3] ARM: tegra: make use of negative ENV_OFFSET on NVIDIA boards |
2013-05-21 |
Stephen Warren |
|
New |
| [U-Boot,3/3,v3] common, menu: show menu on startup if CONFIG_MENU_SHOW is defined |
2012-01-18 |
Heiko Schocher |
vapier |
New |
| [U-Boot,3/3,V5] EXYNOS5: GPIO: Enable GPIO Command for EXYNOS5 |
2013-04-03 |
Rajeshwari Shinde |
prom |
Under Review |
| [U-Boot,2/9] mx53loco: Return error if the SDHC port index is invalid |
2013-05-21 |
Fabio Estevam |
|
New |
| [U-Boot,2/9] NET: fec_mxc.c: Add support for MII for MX5 SOCs |
2012-02-22 |
Stefano Babic |
sbabic |
New |
| [U-Boot,2/8] microblaze: Remove address offset for uart16550 |
2011-08-31 |
Michal Simek |
monstr |
New |
| [U-Boot,2/7] ahci: fix unaligned access |
2013-05-21 |
Rob Herring |
|
New |
| [U-Boot,2/7] JFFS2: Change allocated buffer size |
2011-04-24 |
Baidu Boy |
dzu |
New |
| [U-Boot,2/6] powerpc/mpc85xx: modify the functionality clear_bss and the end address of the BSS |
2013-05-20 |
ying.zhang@freescale.com |
|
New |
| [U-Boot,2/6] README: mx28_common: Do not hardcode the SSP port |
2013-05-03 |
Fabio Estevam |
sbabic |
New |
| [U-Boot,2/6] Exynos: Exynos4x10: Add clock structure for exynos4x10 |
2012-10-12 |
Piotr Wilczek |
prom |
New |
| [U-Boot,2/6] ARM: add assembly routine to switch to non-secure state |
2013-05-06 |
Andre Przywara |
aaribaud |
New |
| [U-Boot,2/6,v2] powerpc/boot: Change the macro of Boot from SRIO and PCIE master module |
2013-05-07 |
Liu Gang |
afleming |
New |
| [U-Boot,2/5] x86: config: Reflect the name changes of LPC TPM configs |
2013-04-12 |
Simon Glass |
trini |
New |
| [U-Boot,2/5] powerpc/pamu : PAMU configuration for accessing SEC block |
2013-03-28 |
Ruchika Gupta |
afleming |
New |
| [U-Boot,2/5] arm: make __image_copy_{start, end} compiler-generated |
2013-05-14 |
Albert ARIBAUD |
aaribaud |
New |
| [U-Boot,2/5] EXYNOS: Add Exynos4 I2C spacing |
2012-09-24 |
Piotr Wilczek |
prom |
Under Review |
| [U-Boot,2/5,v5] powerpc/mpc85xx: new SPL support for IFC NAND |
2013-04-16 |
Prabhakar Kushwaha |
afleming |
New |
| [U-Boot,2/4] usb:composite: use memcpy to avoid unaligned access |
2013-04-10 |
Piotr Wilczek |
prafulla@marvell.com |
New |
| [U-Boot,2/4] sf: Add extended address register reading support |
2013-02-23 |
Jagannadha Sutradharudu Teki |
trini |
New |
| [U-Boot,2/4] microblaze: Fix byteorder for microblaze |
2012-10-05 |
Michal Simek |
monstr |
New |
| [U-Boot,2/4] exynos5: Enable tps65090 on smdk5250 |
2013-04-02 |
Simon Glass |
prom |
New |
| [U-Boot,2/4] board: xilinx: Remove common folder |
2013-01-23 |
Michal Simek |
monstr |
New |
| [U-Boot,2/4] arm: make __image_copy_{start, end} compiler-generated |
2013-05-10 |
Albert ARIBAUD |
aaribaud |
New |
| [U-Boot,2/4] Exynos5: cpufreq: Implement frequency scaling for exynos5 |
2013-04-03 |
Akshay Saraswat |
prom |
New |
| [U-Boot,2/4] EXYNOS: LDS file move to common |
2013-04-25 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,2/4,v2] Exynos5: cpufreq: Implement frequency scaling for exynos5 |
2013-05-13 |
Akshay Saraswat |
prom |
New |
| [U-Boot,2/4,V5] EXYNOS5: FDT: Add serial device node values |
2013-05-17 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,2/4,V4] EXYNOS5: FDT: Add serial device node values |
2013-04-02 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,2/3] usb: workaround non-working keyboards. |
2013-05-11 |
Simon Glass |
marex |
New |
| [U-Boot,2/3] net: macb: using phylib to configure phy device |
2013-04-24 |
Bo Shen |
jhersh |
New |
| [U-Boot,2/3] exynos5250: move board specific configs to board specific config file |
2013-03-26 |
Inderpal Singh |
prom |
Under Review |
| [U-Boot,2/3] env_mmc: allow negative CONFIG_ENV_OFFSET |
2013-05-21 |
Stephen Warren |
|
New |
| [U-Boot,2/3] arm/km: use CONFIG_NAND_ECC_BCH |
2013-01-16 |
Holger Brunck |
prafulla@marvell.com |
New |
| [U-Boot,2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114 |
2013-04-29 |
Jim Lin |
tomcwarren |
Under Review |
| [U-Boot,2/3,V5] S5P: Rename GPIO definitions |
2013-04-03 |
Rajeshwari Shinde |
prom |
Under Review |
| [U-Boot,2/2] video:trats:logo: Make tizen_hd_logo cache line aligned. |
2012-08-08 |
Łukasz Majewski |
ag |
Under Review |
| [U-Boot,2/2] usb: gadget: Use unaligned access for wMaxPacketSize |
2013-05-13 |
Vivek Gautam |
marex |
New |
| [U-Boot,2/2] u-boot/drivers/net/designware with cache support. |
2013-01-22 |
Frank Dols |
jhersh |
New |
| [U-Boot,2/2] spi: mxc_spi: Update pre and post divider algorithm |
2013-05-09 |
Dirk Behme |
sbabic |
New |
| [U-Boot,2/2] serial: Make nulldev a serial device |
2012-11-01 |
Joe Hershberger |
marex |
Under Review |
| [U-Boot,2/2] powerpc/c29xpcie: add support for C29XPCIE board |
2013-04-24 |
Po Liu |
afleming |
New |
| [U-Boot,2/2] powerpc/83xx/km: make local functions and structs static |
2013-05-06 |
Holger Brunck |
afleming |
New |
| [U-Boot,2/2] power: exynos-tmu: use the mux_addr bit fields in tmu_control register |
2013-04-05 |
Naveen Krishna Ch |
prom |
New |
| [U-Boot,2/2] net: add ICPlus PHY driver |
2012-11-28 |
Yegor Yefremov |
jhersh |
New |
| [U-Boot,2/2] net/tftp: sparse fixes |
2013-01-17 |
Kim Phillips |
jhersh |
New |
| [U-Boot,2/2] nand: remote biterr command stub |
2012-03-28 |
Scott Wood |
scottwood |
Under Review |
| [U-Boot,2/2] mx6qsabreauto: Add Port Expander reset |
2013-05-14 |
Renato Frias |
sbabic |
Under Review |
| [U-Boot,2/2] microblaze: move ENV onto top of flash |
2012-07-01 |
Stephan Linz |
monstr |
New |
| [U-Boot,2/2] corenet_ds: enable buffered reads |
2011-04-06 |
Scott Wood |
afleming |
New |
| [U-Boot,2/2] common: Use separate dirs for each board for ccache |
2013-05-20 |
Marek Vasut |
|
New |
| [U-Boot,2/2] cmd_sf: "sf update" preserve the final part of the last sector |
2012-04-03 |
Gerlando Falauto |
vapier |
New |
| [U-Boot,2/2] cfi_flash: return NULL for invalid base address input |
2013-05-17 |
Masahiro Yamada |
stroese |
New |
| [U-Boot,2/2] buildman: Produce a sensible error message when branch is missing |
2013-05-03 |
Simon Glass |
sjg |
New |
| [U-Boot,2/2] am33xx: Board: Make CPSW section of ethernet initialization depend on CPSW driver |
2013-05-07 |
Joel A Fernandes |
trini |
New |
| [U-Boot,2/2] Update MAINTAINERS file for sandbox |
2013-05-15 |
Simon Glass |
trini |
Under Review |
| [U-Boot,2/2] OMAP4: Add basic support for OMAP4470/TWL6032 |
2013-04-03 |
Lubomir Popov |
trini |
New |
| [U-Boot,2/2] EXYNOS: SPI: Support SPI_PREAMBLE mode |
2013-05-03 |
Vadim Bendebury |
prom |
New |
| [U-Boot,2/2] Add instruction file (based on the README for the sabrelite) for booting the Congatec board from SD-Card. |
2013-05-13 |
SARTRE Leo |
sbabic |
New |
| [U-Boot,2/2] ARM: bcm2835: add simplefb DT node during bootz/m |
2013-05-08 |
Stephen Warren |
aaribaud |
New |
| [U-Boot,2/2] ARM: OMAP4/5: Remove dead code against CONFIG_SYS_ENABLE_PADS_ALL |
2012-08-07 |
Jassi Brar |
trini |
New |
| [U-Boot,2/2,v4] tools: add support for Dove to kwboot |
2013-02-12 |
Luka Perkov |
prafulla@marvell.com |
New |
| [U-Boot,2/2,v3] Exynos5: spl: Reduce clock init in spl |
2013-03-06 |
Akshay Saraswat |
prom |
New |
| [U-Boot,2/2,V2] EXYNOS: SPI: Support a delay after deactivate |
2013-05-17 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,12/12] sf: Pass rd_qeb_req variable as 0 for status and config reg reads |
2012-12-31 |
Jagan Teki |
vapier |
New |
| [U-Boot,12/12] microblaze: board: Use bi_flashstart instead of CONFIG_SYS_FLASH_BASE |
2012-07-09 |
Michal Simek |
monstr |
New |
| [U-Boot,11/22] ARM: sunxi: U-Boot SPL capable of booting directly from MMC |
2012-11-25 |
Henrik Nordström |
aaribaud |
New |
| [U-Boot,11/12] microblaze: Clean microblaze initialization |
2012-07-09 |
Michal Simek |
monstr |
New |
| [U-Boot,11/11] powerpc/ppc4xx: Remove CONFIG_SYS_FLASH_PROTECTION from gdsys boards |
2013-04-22 |
Dirk Eibach |
stroese |
New |
| [U-Boot,10/22] sunxi: Add more network commands and netconsole support |
2012-11-25 |
Henrik Nordström |
jhersh |
New |
| [U-Boot,10/12] microblaze: Call serial multi initialization |
2012-07-09 |
Michal Simek |
monstr |
New |
| [U-Boot,10/11] powerpc/ppc4xx: Consider gdsys FPGA OSD size |
2013-04-22 |
Dirk Eibach |
stroese |
New |
| [U-Boot,10/10] pxe: add ipappend support |
2012-12-03 |
Rob Herring |
jhersh |
New |
| [U-Boot,10/10] highbank: enable keyed autoboot stop |
2013-05-15 |
Rob Herring |
aaribaud |
New |
| [U-Boot,1/9] wandboard: Return error if the SDHC port index is invalid |
2013-05-21 |
Fabio Estevam |
|
New |
| [U-Boot,1/9] arm926ej-s: Invalidate instruction cache in flush_cache |
2011-03-17 |
Michael Spang |
marex |
Under Review |
