| [U-Boot,v2] powerpc: fix 8xx and 82xx type-punning warnings with GCC 4.7 |
2013-05-18 |
Scott Wood |
|
New |
| [U-Boot,v4,1/4] mx31pdk: copy SPL directly, not using relocate_code. |
2013-05-19 |
Albert ARIBAUD |
|
New |
| [U-Boot,1/6] powerpc/mpc85xx: support application without resetvec segment in the linker script |
2013-05-20 |
ying.zhang@freescale.com |
|
New |
| [U-Boot] disk: Fix possible out-of-bounds access in part_efi.c |
2013-05-19 |
Marek Vasut |
|
New |
| [U-Boot,3/6] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL |
2013-05-20 |
ying.zhang@freescale.com |
|
New |
| [U-Boot,v4,3/4] arm: do not compile relocate_code() for SPL builds |
2013-05-19 |
Albert ARIBAUD |
|
New |
| [U-Boot] tools/fw_env: use fsync to ensure that data is physically stored |
2013-05-20 |
Michael Heimpold |
|
New |
| [U-Boot,5/6] spl: Make CONFIG_SPL_BUILD contain more functionality |
2013-05-20 |
ying.zhang@freescale.com |
|
New |
| [U-Boot] Fix device detection for API consumers |
2013-05-19 |
Ilya Bakulin |
|
New |
| [U-Boot,6/6] powerpc/p1022ds: boot from SD Card with SPL |
2013-05-20 |
ying.zhang@freescale.com |
|
New |
| [U-Boot,2/6] powerpc/mpc85xx: modify the functionality clear_bss and the end address of the BSS |
2013-05-20 |
ying.zhang@freescale.com |
|
New |
| [U-Boot,4/6] Makefile: move the common makefile line to public area |
2013-05-20 |
ying.zhang@freescale.com |
|
New |
| [U-Boot,2/2] common: Use separate dirs for each board for ccache |
2013-05-20 |
Marek Vasut |
|
New |
| [U-Boot,v4,4/4] arm: factorize relocate_code routine |
2013-05-19 |
Albert ARIBAUD |
|
New |
| [U-Boot,v4,03/10] i2c, soft-i2c: switch to new multibus/multiadapter support |
2013-05-18 |
Heiko Schocher |
|
New |
| [U-Boot,v4,2/4] tx25: copy SPL directly, not using relocate_code. |
2013-05-19 |
Albert ARIBAUD |
|
New |
| [U-Boot,V2,OMAP-ULPI] : This patch fix the omap access to the transceiver configuration registers using the ulpi bus. |
2013-05-20 |
Michael Trimarchi |
|
New |
| [U-Boot,1/2] common: Add CCACHE variable to allow use of ccache |
2013-05-20 |
Marek Vasut |
|
New |
| [U-Boot] ppc: ppmc7xx: Fix possible out-of-bound access |
2013-05-20 |
Marek Vasut |
|
New |
| [U-Boot] (patch) segfault when calling fit_check_format() on corrupt FIT images |
2010-03-05 |
Jon Nalley |
wd |
New |
| [U-Boot,SPEAr,Fixes,02/11] spear/configs: Split config files hierarchically into plat, arch, soc and board |
2012-11-02 |
Vipin Kumar |
vipink |
New |
| [U-Boot,SPEAr,Enhancement,2/9] spear3xx: Add pinmux support |
2012-11-02 |
Vipin Kumar |
vipink |
New |
| [U-Boot,SPEAr,Fixes,04/11] spear/board: Cleanup spear related board files |
2012-11-02 |
Vipin Kumar |
vipink |
New |
| [U-Boot,SPEAr,Fixes,11/11] spear3xx: FIX: Enable access to memory for spear310 and spear320 |
2012-11-02 |
Vipin Kumar |
vipink |
New |
| [U-Boot,SPEAr,Fixes,03/11] spear/include: Clean up the spear include files |
2012-11-02 |
Vipin Kumar |
vipink |
New |
| [U-Boot,SPEAr,Fixes,08/11] spear/spl: Cleanup spear SPL |
2012-11-02 |
Vipin Kumar |
vipink |
New |
| [U-Boot,SPEAr,Fixes,10/11] spear: Enable ehci support |
2012-11-02 |
Vipin Kumar |
vipink |
New |
| [U-Boot,SPEAr13xx,1/7] spear1340: Add support for spear1340 SoC |
2012-11-02 |
Vipin Kumar |
vipink |
New |
| [U-Boot,SPEAr13xx,4/7] spear1310evb: Add support for evb machine |
2012-11-02 |
Vipin Kumar |
vipink |
New |
| [U-Boot,SPEAr,Enhancement,3/9] spear320plc: Correct the MACB interface |
2012-11-02 |
Vipin Kumar |
vipink |
New |
| [U-Boot,SPEAr,Fixes,07/11] spear: Cleanup SoC area |
2012-11-02 |
Vipin Kumar |
vipink |
New |
| [U-Boot,SPEAr,Enhancement,1/9] spear: Add cache support |
2012-11-02 |
Vipin Kumar |
vipink |
New |
| [U-Boot,SPEAr13xx,5/7] spear1340lcad: Add support for LCAD machine |
2012-11-02 |
Vipin Kumar |
vipink |
New |
| [U-Boot,SPEAr,Fixes,09/11] spear: Add POST memory support |
2012-11-02 |
Vipin Kumar |
vipink |
New |
| [U-Boot,SPEAr13xx,2/7] spear1310: Add support for spear1310 SoC |
2012-11-02 |
Vipin Kumar |
vipink |
New |
| [U-Boot,SPEAr,Enhancement,6/9] spear320-hmi: Add support for hmi machine |
2012-11-02 |
Vipin Kumar |
vipink |
New |
| [U-Boot,SPEAr,Enhancement,5/9] spear320: Add support for SD/MMC |
2012-11-02 |
Vipin Kumar |
vipink |
New |
| [U-Boot,SPEAr,Enhancement,8/9] spear/spl: Add support to boot from Parallel NOR device |
2012-11-02 |
Vipin Kumar |
vipink |
New |
| [U-Boot,SPEAr,Enhancement,9/9] spear300evb: Add SPL support |
2012-11-02 |
Vipin Kumar |
vipink |
New |
| [U-Boot,SPEAr,Enhancement,7/9] spear6xx/spear3xx: Add support to boot via NAND device |
2012-11-02 |
Vipin Kumar |
vipink |
New |
| [U-Boot,SPEAr13xx,6/7] spear1340evb: Add SPL support |
2012-11-02 |
Vipin Kumar |
vipink |
New |
| [U-Boot,SPEAr,Enhancement,4/9] spear/configs: Modify several configurations |
2012-11-02 |
Vipin Kumar |
vipink |
New |
| [U-Boot,SPEAr,Fixes,06/11] spear: Read ethaddr from I2C memory |
2012-11-02 |
Vipin Kumar |
vipink |
New |
| [U-Boot,SPEAr13xx,7/7] spear1310evb: Add SPL support |
2012-11-02 |
Vipin Kumar |
vipink |
New |
| [U-Boot,SPEAr,Fixes,01/11] SPEAr: Remove extra spear board configurations |
2012-11-02 |
Vipin Kumar |
vipink |
New |
| [U-Boot,SPEAr13xx,3/7] spear1340evb: Add support for evb machine |
2012-11-02 |
Vipin Kumar |
vipink |
New |
| [U-Boot,SPEAr,Fixes,05/11] spear: Append MISC_ as prefix to misc register bitmasks |
2012-11-02 |
Vipin Kumar |
vipink |
New |
| [U-Boot,03/12] cmd_sf: Add wr_inst argument to 'sf update' command |
2012-12-31 |
Jagan Teki |
vapier |
New |
| [U-Boot,PATH,v3,2/2] sf: Add config register reading support |
2013-01-03 |
Jagan Teki |
vapier |
New |
| [U-Boot] OSE support shouldnt be enabled by default |
2011-05-13 |
Torkel Lundgren |
vapier |
New |
| [U-Boot,v2,1/2] cmd_sf: Add DIOFR(Dual IO Fast Read) read instruction support |
2012-12-31 |
Jagan Teki |
vapier |
New |
| [U-Boot,08/12] cmd_sf: Add DOFR(Dual Output Fast Read) read instruction support |
2012-12-31 |
Jagan Teki |
vapier |
New |
| [U-Boot,PATH,v3,1/2] sf: Add status register reading support |
2013-01-03 |
Jagan Teki |
vapier |
New |
| [U-Boot,3/3,v3] common, menu: show menu on startup if CONFIG_MENU_SHOW is defined |
2012-01-18 |
Heiko Schocher |
vapier |
New |
| [U-Boot,07/12] cmd_sf: Add ASR(Array Slow Read) read instruction support |
2012-12-31 |
Jagan Teki |
vapier |
New |
| [U-Boot,04/12] cmd_sf: Add rd_inst argument to 'sf update' command |
2012-12-31 |
Jagan Teki |
vapier |
New |
| [U-Boot] SF: Add Spansion S25FL064P IDs |
2012-08-29 |
Marek Vasut |
vapier |
New |
| [U-Boot,v2,2/2] cmd_sf: Add QIOFR(Quad IO Fast Read) read instruction support |
2012-12-31 |
Jagan Teki |
vapier |
New |
| [U-Boot,06/12] cmd_sf: Add QPP(Quad-input Page Program) write instruction support |
2012-12-31 |
Jagan Teki |
vapier |
New |
| [U-Boot,U-Boot,v2,6/6] sf: Set QUAD enable bit support |
2012-12-19 |
Jagan Teki |
vapier |
New |
| [U-Boot,U-Boot,v2,2/6] cmd_sf: Add print messages on flash read/write commands |
2012-12-19 |
Jagan Teki |
vapier |
New |
| [U-Boot,U-Boot,v2,1/6] cmd_sf: Add print messages on flash erase command |
2012-12-19 |
Jagan Teki |
vapier |
New |
| [U-Boot,V3,1/2] mtd/spi/spi_flash: support CMD_READ_ID=0x90 case |
2012-07-09 |
Mikhail Kshevetskiy |
vapier |
Under Review |
| [U-Boot,01/12] cmd_sf: Add wr_inst argument to 'sf write' command |
2012-12-31 |
Jagan Teki |
vapier |
New |
| [U-Boot,U-Boot,v2,5/6] sf: Add config register reading support |
2012-12-19 |
Jagan Teki |
vapier |
New |
| [U-Boot,v2,5/7] microblaze: timer: Prepare for device-tree initialization |
2012-08-06 |
Michal Simek |
vapier |
New |
| [U-Boot,12/12] sf: Pass rd_qeb_req variable as 0 for status and config reg reads |
2012-12-31 |
Jagan Teki |
vapier |
New |
| [U-Boot,v2] common, menu: do not timeout again if an item was selected but not found |
2012-01-18 |
Heiko Schocher |
vapier |
New |
| [U-Boot,05/12] cmd_sf: Define a functions for parsing read and write instructions |
2012-12-31 |
Jagan Teki |
vapier |
New |
| [U-Boot,09/12] cmd_sf: Add QOFR(Quad Output Fast Read) read instruction support |
2012-12-31 |
Jagan Teki |
vapier |
New |
| [U-Boot,v2,4/7] microblaze: intc: Coding style cleanup |
2012-08-06 |
Michal Simek |
vapier |
New |
| [U-Boot,2/2] cmd_sf: "sf update" preserve the final part of the last sector |
2012-04-03 |
Gerlando Falauto |
vapier |
New |
| [U-Boot] sf: spansion: Correct the first byte of idcode1 for S25FL256S part |
2012-09-14 |
402jagan@gmail.com |
vapier |
New |
| [U-Boot,1/2] cmd_sf: let "sf update" erase last sector as a whole |
2012-04-03 |
Gerlando Falauto |
vapier |
New |
| [U-Boot] sf: winbond: Add support for W25Q64DW |
2012-09-03 |
402jagan@gmail.com |
vapier |
New |
| [U-Boot,1/2] add ST PSD4256G6V to table of supported legacy flashs |
2012-07-31 |
Mike Frysinger |
vapier |
New |
| [U-Boot,02/12] cmd_sf: Add rd_inst argument to 'sf read' command |
2012-12-31 |
Jagan Teki |
vapier |
New |
| [U-Boot,v5,4/7] cros: add LPC support for cros_ec |
2013-05-15 |
Hung-ying Tyan |
trini |
New |
| [U-Boot] OMAP4/5: Add USB EHCI support |
2013-04-01 |
Lubomir Popov |
trini |
New |
| [U-Boot,v3] command/cache: Add flush command |
2013-04-05 |
York Sun |
trini |
New |
| [U-Boot,v5,5/7] cros: adds cros_ec keyboard driver |
2013-05-15 |
Hung-ying Tyan |
trini |
New |
| [U-Boot,PATCHv3,2/6] spl_mmc: mmc_load_image_fat(): Add filename argument and move fat init out |
2013-05-13 |
Peter Korsgaard |
trini |
New |
| [U-Boot,v5,3/7] cros: exynos: add SPI support for cros_ec |
2013-05-15 |
Hung-ying Tyan |
trini |
New |
| [U-Boot,v5,6/7] cros: exynos: add cros-ec device nodes to exynos5250-snow.dts |
2013-05-15 |
Hung-ying Tyan |
trini |
New |
| [U-Boot,v2] OMAP4: Add ID for OMAP4470_ES1_0 |
2013-04-04 |
Lubomir Popov |
trini |
New |
| [U-Boot] SPI: Winbond: Add W25Q32 to spi flash table |
2013-02-07 |
Rajeshwari Shinde |
trini |
New |
| [U-Boot,1/5] tpm: Rename generic_lpc_tpm to tpm_tis_lpc |
2013-04-12 |
Simon Glass |
trini |
New |
| [U-Boot,1/1] OMAP4/5: I2C: New read/write/probe functions |
2013-04-04 |
Lubomir Popov |
trini |
New |
| [U-Boot] mtd: spi: winbond: add W25PXX support |
2013-04-26 |
Kuo-Jung Su |
trini |
New |
| [U-Boot,v10] Add dmmalloc module for DM. |
2012-10-28 |
Tomas Hlavacek |
trini |
New |
| [U-Boot,v4,7/9] main: Correct header order |
2013-05-15 |
Simon Glass |
trini |
New |
| [U-Boot] Allow U-Boot scripts to be placed in a .env file |
2013-04-16 |
Simon Glass |
trini |
New |
| [U-Boot,v3,03/10] image: Introduce fit_image_load() to load images from FITs |
2013-05-16 |
Simon Glass |
trini |
New |
| [U-Boot,3/5] tpm: Add support for new Infineon I2C TPM (SLB 9645 TT 1.2 I2C) |
2013-04-12 |
Simon Glass |
trini |
New |
| [U-Boot] OMAP5: Power: Added more functionality to twl6035 driver |
2013-04-01 |
Lubomir Popov |
trini |
New |
| [U-Boot,2/2] OMAP4: Add basic support for OMAP4470/TWL6032 |
2013-04-03 |
Lubomir Popov |
trini |
New |
| [U-Boot,2/5] x86: config: Reflect the name changes of LPC TPM configs |
2013-04-12 |
Simon Glass |
trini |
New |
| [U-Boot,v3] tpm: Add TPM command library |
2013-02-28 |
Che-liang Chiou |
trini |
New |
| [U-Boot,v2,2/3] tpm: Add Infineon slb9635_i2c TPM driver |
2013-04-12 |
Simon Glass |
trini |
New |
| [U-Boot] Fix handling of some broken test expressions |
2012-11-15 |
Domenico Andreoli |
trini |
New |