Patchwork U-Boot

login
register
mail settings

Incoming patches

« Previous 1 2 3 4 5 6 7 8 9 10 Next »
Filters: State = Action Required remove filter    |    Archived = No remove filter
Patch A/R/T Date Submitter Delegate State
[U-Boot,v3:,DNS320,support,1/4] kirkwood: Rename dns325 to dnskw 0 0 0 2014-05-22 Bastien ROUCARIES prafulla@marvell.com New
[U-Boot,4/4] kirkwood: Shorten DNS-325 IDENT_STRING to match DNS-320 0 0 0 2014-05-18 Bastien ROUCARIES prafulla@marvell.com New
[U-Boot,3/4] kirkwood: Set unused SD pins back to GPIO for DNS-320 & DNS-325 0 0 0 2014-05-18 Bastien ROUCARIES prafulla@marvell.com New
[U-Boot,2/4] kirkwood: Add support for the D-Link DNS-320 0 0 0 2014-05-18 Bastien ROUCARIES prafulla@marvell.com New
[U-Boot,1/4] kirkwood: Rename dns325 to dnskw 0 0 0 2014-05-18 Bastien ROUCARIES prafulla@marvell.com New
[U-Boot,8/8] video: imx25lcdc: add board_video_init() call 0 0 0 2014-05-15 dietho@gmx.de sbabic New
[U-Boot,7/8] imx25: Add new registers defines 0 0 0 2014-05-15 dietho@gmx.de sbabic New
[U-Boot,6/8] zmx25: Extended support for cpu and base boards 0 0 0 2014-05-15 dietho@gmx.de sbabic New
[U-Boot,5/8] input: Add support for MPR121 touch controller 0 0 0 2014-05-15 dietho@gmx.de sbabic New
[U-Boot,4/8] input: Add support for FMA1125 touch controller 0 0 0 2014-05-15 dietho@gmx.de sbabic New
[U-Boot,3/8] mxc_i2c: Use the 3th i2c channel for imx25 1 0 0 2014-05-15 dietho@gmx.de sbabic New
[U-Boot,2/8] input: Add polytouch touch sensor controller 0 0 0 2014-05-15 dietho@gmx.de sbabic New
[U-Boot,1/8] imx25: Add new hardware registers 0 0 0 2014-05-15 dietho@gmx.de sbabic New
[U-Boot,v2] mtd: nand: Fix address cycle problem with NAND_CMD_RNDOUT 0 0 1 2014-05-06 Stefan Roese scottwood New
[U-Boot,5/5] arm: mxs: olinuxino: Fine-tune DRAM configuration 0 0 0 2014-04-28 Marek Vasut sbabic New
[U-Boot,4/5] arm: mxs: olinuxino: Enable USB only when needed 0 0 0 2014-04-28 Marek Vasut sbabic New
[U-Boot,3/5] arm: mxs: Wait for DRAM to start 0 0 0 2014-04-28 Marek Vasut sbabic New
[U-Boot,2/5] arm: mxs: Wait when disabling VDDMEM current limiter 0 0 0 2014-04-28 Marek Vasut sbabic New
[U-Boot,1/5] usb: ehci: mxs: Add board-specific callbacks 0 0 0 2014-04-28 Marek Vasut sbabic New
[U-Boot,v2,6/6] ARM: tegra: paz00: enable nvec keyboard 0 0 0 2014-04-27 Andrey Danin tomcwarren New
[U-Boot,v2,5/6] ARM: tegra: paz00: add dt bindings for nvec 0 0 0 2014-04-27 Andrey Danin tomcwarren New
[U-Boot,v2,4/6] ARM: tegra: nvec: add keyboard support 0 0 0 2014-04-27 Andrey Danin tomcwarren New
[U-Boot,v2,3/6] ARM: tegra: i2c: add nvec driver 0 0 0 2014-04-27 Andrey Danin tomcwarren New
[U-Boot,v2,2/6] ARM: tegra: i2c: add slave mode support 0 0 0 2014-04-27 Andrey Danin tomcwarren New
[U-Boot] Enable big-endian processors to use EHCI interrupt transfers 0 0 0 2014-04-09 Adrian Cox marex New
[U-Boot] Enable big-endian processors to use EHCI interrupt transfers 0 1 0 2014-04-09 Adrian Cox marex New
[U-Boot,4/4] i2c: Add ST33ZP24 I2C TPM support 0 0 0 2014-04-01 Jean-Luc BLANC trini New
[U-Boot,3/4] spi: ST33ZP24 SPI: Patch driver to support hash in locality 4 1 0 0 2014-04-01 Jean-Luc BLANC trini New
[U-Boot,2/4] spi: ST33ZP24 SPI: Patch driver to support 2 TPMs 0 0 0 2014-04-01 Jean-Luc BLANC trini New
[U-Boot,1/4] spi: Add ST33ZP24 SPI TPM support 0 0 0 2014-04-01 Jean-Luc BLANC trini New
[U-Boot] Xilinx Zed Board resets with Master 0 0 0 2014-03-28 Tim Sander monstr New
[U-Boot] Xilinx Zed Board resets with Master 0 0 0 2014-03-27 Michal Simek monstr New
[U-Boot] Xilinx Zed Board resets with Master 0 0 0 2014-03-27 Michal Simek monstr New
[U-Boot,V4,09/13] ARM: tegra: use clrsetbits_le32 in pinmux driver 0 0 0 2014-03-25 Wolfgang Denk tomcwarren New
[U-Boot,V3,09/13] ARM: tegra: use clrsetbits_le32 in pinmux driver 1 0 0 2014-03-25 Stephen Warren tomcwarren New
[U-Boot,6/6] sandbox: Add board_run_command() function 0 0 0 2014-03-24 Simon Glass trini New
[U-Boot,5/6] main: Process FDT options even without CONFIG_BOOTDELAY 0 0 0 2014-03-24 Simon Glass trini New
[U-Boot,4/6] main: Exclude getline code when CONFIG_CMDLINE is not defined 0 0 0 2014-03-24 Simon Glass trini New
[U-Boot,3/6] Add CONFIG_CMDLINE to allow removal of all commands 0 0 0 2014-03-24 Simon Glass trini New
[U-Boot,2/6] Refactor command macros so they can compile to nothing 0 0 0 2014-03-24 Simon Glass trini New
[U-Boot,1/6] Add an info word to commands 0 0 0 2014-03-24 Simon Glass trini New
[U-Boot] usb/xhci: remove XHCI init code from other usb controllers 0 0 0 2014-03-24 Zhao Qiang marex New
[U-Boot,V2,09/13] ARM: tegra: use clrsetbits_le32 in pinmux driver 1 0 0 2014-03-21 Stephen Warren tomcwarren New
[U-Boot] Wired cursor colors.... 0 0 0 2014-03-21 Reinhard Arlt ag New
[U-Boot] usb start crashing on arndale 0 0 0 2014-03-12 Inderpal Singh marex New
[U-Boot] cfi_flash: Micron Nor flash don't support read operation after send 0 0 0 2014-03-12 qi wang stroese New
[U-Boot] cfi_flash: Micron Nor flash don't support read operation after send write command 0 0 0 2014-03-11 qi wang stroese New
[U-Boot] cfi_flash: Micron Nor flash don't support read operation after send write command 0 0 0 2014-03-11 qi wang stroese New
[U-Boot] lcd: Add support for CONFIG_LCD_NOSTDOUT 0 0 0 2014-03-06 Hannes Petermaier ag Under Review
[U-Boot,v2] net: fec_mxc: fix mii_speed configuration for MX6's 0 0 0 2014-02-19 Philippe De Muyter sbabic New
[U-Boot] net: phy: micrel: add support for KSZ8895 switch in SMI mode 0 0 0 2014-02-19 Philippe De Muyter jhersh New
[U-Boot,RFC] try to merge different i.MX environment 0 0 0 2014-02-14 Stefano Babic sbabic New
[U-Boot,v2,2/6] Add MS7206SE ethernet support 0 0 0 2014-02-13 Yoshinori Sato jhersh New
[U-Boot] ATMEL AT45DB041D spi flash and gplugd 0 0 0 2014-02-09 Yogi P jagan Under Review
[U-Boot,RFC] usb: add driver for Synopsis DWC2 USB IP block 0 0 0 2014-02-06 Stephen Warren marex New
[U-Boot] tools: mxsboot: Implement SPI SMEM block support 0 0 0 2014-02-06 Marek Vasut sbabic New
[U-Boot,v4,5/5] sf: Update bank configuration 0 0 0 2014-02-04 Jagannadha Sutradharudu Teki jagan Under Review
[U-Boot,v4,4/5] doc: SPI: Update the dual_flash info 0 0 0 2014-02-04 Jagannadha Sutradharudu Teki jagan Under Review
[U-Boot,v4,3/5] sf: Use slave mode for dual_flash connection 0 0 0 2014-02-04 Jagannadha Sutradharudu Teki jagan Under Review
[U-Boot,v4,2/5] sf: Optimize flash features code 0 0 0 2014-02-04 Jagannadha Sutradharudu Teki jagan Under Review
[U-Boot,3/3] mpc83xx: add ids8313 support 0 0 0 2014-01-25 Heiko Schocher kimphill New
[U-Boot,2/3] mpc8313, bootcount: mpc8313 has no qe muram 0 0 0 2014-01-25 Heiko Schocher kimphill New
[U-Boot,1/3] powerpc, ids8247: create vendor board dir ids 0 0 0 2014-01-25 Heiko Schocher kimphill New
[U-Boot,3/3] arm: vf610: Add QSPI driver support 0 0 0 2014-01-13 Alison Wang jagan Under Review
[U-Boot,2/3] arm: vf610: Add QSPI support for VF610TWR 0 0 0 2014-01-13 Alison Wang jagan Under Review
[U-Boot,1/3] arm: imx: Add two macros for VF610 in IOMUX_PAD structure 0 0 0 2014-01-13 Alison Wang jagan Under Review
[U-Boot,v3] spi/cadence: Adding Cadence SPI driver support for SOCFPGA 0 0 0 2014-01-10 Chin Liang See jagan Under Review
[U-Boot] spi: oc_tiny_spi: Refactor to simplify spi_xfer implementation 0 0 0 2014-01-10 Axel Lin jagan Under Review
[U-Boot,7/7,V5] powerpc/esdhc: Update esdhc command execution process 0 0 0 2013-12-30 Haijun.Zhang panto New
[U-Boot,6/7,V5] Powerpc/esdhc: Add esdhc host version define 0 0 0 2013-12-30 Haijun.Zhang panto New
[U-Boot,5/7,V5] mmc: Enhance mmcinfo command 0 0 0 2013-12-30 Haijun.Zhang panto New
[U-Boot,4/7,V5] mmc: Update the handling of returned erase block 0 0 0 2013-12-30 Haijun.Zhang panto New
[U-Boot,3/7,V5] mmc: Enhance erase handling procedure 0 0 0 2013-12-30 Haijun.Zhang panto New
[U-Boot,2/7,V5] mmc: Get secure erase information from card 0 0 0 2013-12-30 Haijun.Zhang panto New
[U-Boot,1/7,V5] mmc: Add some usefull macro definition 0 0 0 2013-12-30 Haijun.Zhang panto New
[U-Boot,v3,4/4] mtd:vf610twr:add flash at26df081a for vf610twr platform 0 0 0 2013-12-20 Chao Fu jagan Under Review
[U-Boot,v3,3/4] arm:vf610:vf610-twr:Enable the DSPI for Freesacale vf610-twr board 0 0 0 2013-12-20 Chao Fu jagan Under Review
[U-Boot,v3,2/4] arm:vf610:Enable the DSPI for Freescale vf610 platform 0 0 0 2013-12-20 Chao Fu jagan Under Review
[U-Boot,v3,1/4] spi:rewrite the Freescale DSPI driver. 0 0 0 2013-12-20 Chao Fu jagan Under Review
[U-Boot,RFC,V4,1/2] ARM: OMAP4/5: Add alternative method for HSIC USB devices reset 0 0 0 2013-12-19 Lubomir Popov trini New
[U-Boot,RFC,2/2] ARM: omap5_uevm: Example usage of alternative HSIC USB device reset 0 0 0 2013-12-19 Lubomir Popov trini New
[U-Boot,v15] Introduced btrfs file-system with btrload command 0 0 0 2013-12-12 Koen Kooi trini New
[U-Boot,2/2] net: Merge asm/fsl_enet.h into fsl_mdio.h 0 0 0 2013-12-10 Claudiu Manoil jhersh New
[U-Boot,1/2] net: tsec: Fix NULL access in case init_phy() fails 0 0 0 2013-12-10 Claudiu Manoil jhersh New
[U-Boot] ARM: tegra: Use the IRAM for the early stack 0 0 0 2013-12-09 Alban Bedel tomcwarren New
[U-Boot,v8] nand: add Faraday FTNANDC021 NAND controller support 1 0 0 2013-11-28 Kuo-Jung Su scottwood New
[U-Boot,v2,1/4] i2c: fti2c010: cosmetic: coding style cleanup 0 0 0 2013-11-28 Kuo-Jung Su kimphill New
[U-Boot,RESEND,2/2] Update all references to get_ram_size to unsigned long 0 0 0 2013-11-14 Oliver Schinagl trini New
[U-Boot,RESEND,1/2] get_ram_size incorrectly returns long, should be unsigned long 0 0 0 2013-11-14 Oliver Schinagl trini New
[U-Boot,1/2] hashtable: fix the export lenght computation. 0 0 0 2013-11-14 Pierre Aubert jhersh New
[U-Boot,v2,4/4] x86: Support loading kernel setup from a FIT 0 0 0 2013-11-10 Simon Glass sjg New
[U-Boot,v2,3/4] x86: Allow cmdline setup in setup_zimage() to be optional 0 0 0 2013-11-10 Simon Glass sjg New
[U-Boot,v2,2/4] x86: Rewrite bootm.c to make it similar to ARM 0 0 0 2013-11-10 Simon Glass sjg New
[U-Boot,v2,1/4] x86: Enable LMB and RAMDISK_HIGH by default 0 0 0 2013-11-10 Simon Glass sjg New
[U-Boot,v4,8/8] main: Use autoconf in main_loop() 0 1 0 2013-10-26 Simon Glass trini New
[U-Boot,v4,7/8] main: Use autoconf in command line reading 0 1 0 2013-10-26 Simon Glass trini New
[U-Boot,v4,6/8] main: Use autoconf for parser selection 0 0 0 2013-10-26 Simon Glass trini New
[U-Boot,v4,5/8] main: Use autoconf for boot_delay code 0 0 0 2013-10-26 Simon Glass trini New
[U-Boot,v4,4/8] main: Use autoconf to remove #ifdefs around process_boot_delay() 0 0 0 2013-10-26 Simon Glass trini New
[U-Boot,v4,3/8] main: Remove CONFIG #ifdefs from the abortboot() code 0 1 0 2013-10-26 Simon Glass trini New