| [U-Boot] gpio: Question about gpio_set_value() implementation in spear_gpio.c |
2013-06-19 |
Axel Lin |
|
New |
| [U-Boot,v4,3/3] Add TI816X evm board support |
2013-06-19 |
TENART Antoine |
|
New |
| [U-Boot,v4,2/3] Add TI816X support |
2013-06-19 |
TENART Antoine |
|
New |
| [U-Boot,v4,1/3] Prepare for TI816X : reuse existing code from TI814X |
2013-06-19 |
TENART Antoine |
|
New |
| [U-Boot,[PATCH] ] imx6: fix GPR2 wrong definition |
2013-06-19 |
Pierre Aubert |
|
New |
| [U-Boot] Fix for incorrect conversion hex string to number (FMAN firmware address). |
2013-06-19 |
Николай Пузанов |
|
New |
| [U-Boot] ARM: OMAP4+: Fix MA detection during SDRAM_AUTO_DETECTION |
2013-06-19 |
Lokesh Vutla |
|
New |
| [U-Boot,v3,16/16] dm: Move old driver model documentation into an 'old-docs' directory |
2013-06-19 |
Simon Glass |
|
New |
| [U-Boot,v3,15/16] dm: Add README for driver model |
2013-06-19 |
Simon Glass |
|
New |
| [U-Boot,v3,14/16] dm: Enable gpio command to support driver model |
2013-06-19 |
Simon Glass |
|
New |
| [U-Boot,v3,13/16] sandbox: Convert GPIOs to use driver model |
2013-06-19 |
Simon Glass |
|
New |
| [U-Boot,v3,12/16] dm: Add GPIO support and tests |
2013-06-19 |
Simon Glass |
|
New |
| [U-Boot,v3,11/16] dm: Add a demonstration/example driver |
2013-06-19 |
Simon Glass |
|
New |
| [U-Boot,v3,10/16] dm: Add a 'dm' command for testing |
2013-06-19 |
Simon Glass |
|
New |
| [U-Boot,v3,09/16] dm: Add basic tests |
2013-06-19 |
Simon Glass |
|
New |
| [U-Boot,v3,08/16] dm: Set up driver model after relocation |
2013-06-19 |
Simon Glass |
|
New |
| [U-Boot,v3,07/16] dm: Add base driver model support |
2013-06-19 |
Simon Glass |
|
New |
| [U-Boot,v3,06/16] sandbox: config: Enable driver model |
2013-06-19 |
Simon Glass |
|
New |
| [U-Boot,v3,05/16] Add cmd_process_error() to report and process errors |
2013-06-19 |
Simon Glass |
|
New |
| [U-Boot,v3,04/16] sandbox: Build a device tree file for sandbox |
2013-06-19 |
Simon Glass |
|
New |
| [U-Boot,v3,03/16] sandbox: config: Don't use 64-bit physical memory |
2013-06-19 |
Simon Glass |
|
New |
| [U-Boot,v3,02/16] sandbox: Correct data sizes and printf() strings in fdtdec.c |
2013-06-19 |
Simon Glass |
|
New |
| [U-Boot,v3,01/16] sandbox: Make map_to_sysmem() use a constant pointer |
2013-06-19 |
Simon Glass |
|
New |
| [U-Boot,v6,2/2] pxa: palmtreo680 flash programming utility |
2013-06-18 |
Mike Dunn |
|
New |
| [U-Boot,v6,1/2] pxa: add support for palmtreo680 board |
2013-06-18 |
Mike Dunn |
|
New |
| [U-Boot,V2,2/2] ARM: tegra: enable LCD panel on Ventana |
2013-06-18 |
Stephen Warren |
tomcwarren |
New |
| [U-Boot,V2,1/2] ARM: tegra: enable LCD panel on Harmony |
2013-06-18 |
Stephen Warren |
tomcwarren |
New |
| [U-Boot,v2,3/3] net2big_v2: initialize LEDs at startup |
2013-06-18 |
Simon Guinot |
|
New |
| [U-Boot,v2,2/3] LaCie/common: add support for the CPLD GPIO bus |
2013-06-18 |
Simon Guinot |
|
New |
| [U-Boot,v2,1/3] net2big_v2: initialize I2C fan at startup |
2013-06-18 |
Simon Guinot |
|
New |
| [U-Boot,10/10] powerpc: p1022ds: support TPL on the P1022DS |
2013-06-18 |
ying.zhang@freescale.com |
afleming |
New |
| [U-Boot,09/10,v2] nand: tpl : introduce the TPL based on the SPL |
2013-06-18 |
ying.zhang@freescale.com |
afleming |
New |
| [U-Boot,05/10,v2] powerpc: deleted unused symbol CONFIG_SPL_NAND_MINIMAL and enabled some functionality for common SPL |
2013-06-18 |
ying.zhang@freescale.com |
afleming |
New |
| [U-Boot,RFC] Safe Linux Updater |
2013-06-18 |
Alexandre Dilly |
|
New |
| [U-Boot,3/3] net2big_v2: initialize LEDs at startup |
2013-06-17 |
Simon Guinot |
|
New |
| [U-Boot,2/3] LaCie/common: add support for the GPIO extension bus |
2013-06-17 |
Simon Guinot |
|
New |
| [U-Boot,1/3] net2big_v2: initialize I2C fan at startup |
2013-06-17 |
Simon Guinot |
|
New |
| [U-Boot,3/3] omap: cm_t35: Fix cm_t35 for weak splash_screen_prepare |
2013-06-17 |
Robert Winkler |
ag |
Under Review |
| [U-Boot,2/3] video: lcd: Make splash_screen_prepare weak, remove config macro |
2013-06-17 |
Robert Winkler |
ag |
Under Review |
| [U-Boot,1/3,v2] video: lcd: Add CONFIG_SPLASH_SCREEN_PREPARE support to CONFIG_VIDEO |
2013-06-17 |
Robert Winkler |
ag |
Under Review |
| [U-Boot] arm: fix memory coherency problem after relocation |
2013-06-17 |
Mike Dunn |
|
New |
| [U-Boot] pxa: turn icache off in cpu_init_crit() |
2013-06-17 |
Mike Dunn |
|
New |
| [U-Boot] mtd: nand/docg4: fix driver after Linux resync |
2013-06-17 |
Mike Dunn |
|
New |
| [U-Boot] mpc83xx: add support for mpc8306 |
2013-06-17 |
Filip Brozovic |
|
New |
| [U-Boot,v4,8/8] main: Use autoconf in main_loop() |
2013-06-17 |
Simon Glass |
trini |
New |
| [U-Boot,v4,7/8] main: Use autoconf in command line reading |
2013-06-17 |
Simon Glass |
trini |
New |
| [U-Boot,v4,6/8] main: Use autoconf for parser selection |
2013-06-17 |
Simon Glass |
trini |
New |
| [U-Boot,v4,5/8] main: Use autoconf for boot_delay code |
2013-06-17 |
Simon Glass |
trini |
New |
| [U-Boot,v4,4/8] main: Use autoconf to remove #ifdefs around process_boot_delay() |
2013-06-17 |
Simon Glass |
trini |
New |
| [U-Boot,v4,3/8] main: Remove CONFIG #ifdefs from the abortboot() code |
2013-06-17 |
Simon Glass |
trini |
New |
| [U-Boot,v4,2/8] main: Use autoconf for boot retry feature |
2013-06-17 |
Simon Glass |
trini |
New |
| [U-Boot,v4,1/8] Implement autoconf header file |
2013-06-17 |
Simon Glass |
trini |
New |
| [U-Boot,v2,3/3] arm: omap3: Add SPL support to cm_t35 |
2013-06-17 |
Stefan Roese |
trini |
New |
| [U-Boot] am33xx: fix the ddr_cmdtctrl structure |
2013-06-17 |
Ilya Ledvich |
trini |
New |
| [U-Boot,v5,14/14] arm: add Faraday A360/A369 SoC platform support |
2013-06-17 |
Kuo-Jung Su |
|
New |
| [U-Boot,v5,13/14] mmc: ftsdc010_mci: clk_get_rate() -> clock_get_rate() |
2013-06-17 |
Kuo-Jung Su |
|
New |
| [U-Boot,v5,12/14] arm: add Faraday specific boot command |
2013-06-17 |
Kuo-Jung Su |
|
New |
| [U-Boot,v5,11/14] arm: add Faraday FTPWMTMR010 timer support |
2013-06-17 |
Kuo-Jung Su |
|
New |
| [U-Boot,v5,10/14] arm: add Faraday FTTMR010 timer support |
2013-06-17 |
Kuo-Jung Su |
|
New |
| [U-Boot,v5,09/14] arm: add Faraday FTINTC020 interrupt controller support |
2013-06-17 |
Kuo-Jung Su |
|
New |
| [U-Boot,v5,08/14] arm: add Faraday processor core support |
2013-06-17 |
Kuo-Jung Su |
|
New |
| [U-Boot,v5,07/14] arm: add MMU/D-Cache support for Faraday cores |
2013-06-17 |
Kuo-Jung Su |
|
New |
| [U-Boot,v5,06/14] cfi_flash: use buffer length in unmap_physmem() |
2013-06-17 |
Kuo-Jung Su |
|
New |
| [U-Boot,v5,05/14] nand: add Faraday FTNANDC021 NAND controller support |
2013-06-17 |
Kuo-Jung Su |
|
New |
| [U-Boot,v5,04/14] video: add Faraday FTLCDC200 LCD controller support |
2013-06-17 |
Kuo-Jung Su |
|
New |
| [U-Boot,v5,03/14] net: add Faraday FTMAC110 10/100Mbps ethernet support |
2013-06-17 |
Kuo-Jung Su |
|
New |
| [U-Boot,v5,02/14] net: ftgmac100: add MMU/D-cache support |
2013-06-17 |
Kuo-Jung Su |
|
New |
| [U-Boot,v5,01/14] arm: dma_alloc_coherent: malloc() -> memalign() |
2013-06-17 |
Kuo-Jung Su |
|
New |
| [U-Boot] board/bsc913x: Add config flag for bootdelay |
2013-06-17 |
harninder.rai@freescale.com |
afleming |
New |
| [U-Boot,v2,5/5] ARM: at91: atmel_nand: add code to check the ONFI parameter ECC requirement |
2013-06-17 |
Wu, Josh |
|
New |
| [U-Boot,v2,4/5] mtd: atmel_nand: alloc memory instead of use static array for pmecc data |
2013-06-17 |
Wu, Josh |
|
New |
| [U-Boot,v2,3/5] linux/compat.h: move dev_err, dev_info and dev_dbg from usb driver to compat.h |
2013-06-17 |
Wu, Josh |
|
New |
| [U-Boot,v2,2/5] ARM: at91: sama5d3: remove unused definition about PMECC alpha table offset |
2013-06-17 |
Wu, Josh |
|
New |
| [U-Boot,v2,1/5] ARM: at91: atmel_nand: pmecc driver will select the galois table by sector size |
2013-06-17 |
Wu, Josh |
|
New |
| [U-Boot,v3,3/3] Tegra: Config: Enable Tegra30/Tegra114 USB function |
2013-06-17 |
Jim Lin |
tomcwarren |
New |
| [U-Boot,v3,2/3] ARM: Tegra: USB: EHCI: Add support for Tegra30/Tegra114 |
2013-06-17 |
Jim Lin |
tomcwarren |
New |
| [U-Boot,v3,1/3] ARM: Tegra: FDT: Add USB EHCI function for T30/T114 |
2013-06-17 |
Jim Lin |
tomcwarren |
New |
| [U-Boot] U-boot: Erase/read/write issue with S25fl256S flash device |
2013-06-17 |
Poddar, Sourav |
|
New |
| [U-Boot,2/2] I2C: mxc_i2c: Add support for Vybrid VF610 platform |
2013-06-17 |
Alison Wang |
|
New |
| [U-Boot,1/2] vf610: Add I2C support for Vybrid VF610 platform |
2013-06-17 |
Alison Wang |
|
New |
| [U-Boot] U-boot: Erase/read/write issue with S25fl256S flash device |
2013-06-17 |
Poddar, Sourav |
|
New |
| [U-Boot,v2] dfu, nand: before write a buffer to nand, erase the nand sectors |
2013-06-17 |
Heiko Schocher |
|
New |
| [U-Boot,v2] board/p1010rdb: add pin mux and sdhc support in any boot |
2013-06-17 |
Shengzhou Liu |
afleming |
New |
| [U-Boot] please pull u-boot-samsung master |
2013-06-17 |
Minkyu Kang |
|
New |
| [U-Boot] checkpatch.pl: Do not hardcode perl path |
2013-06-16 |
Jagannadha Sutradharudu Teki |
|
New |
| [U-Boot,V2] ARM: mxs: Consolidate configuration options |
2013-06-16 |
Marek Vasut |
sbabic |
New |
| [U-Boot] checkpatch.pl: Do not hardcode perl path |
2013-06-16 |
Jagannadha Sutradharudu Teki |
|
New |
| [U-Boot] dwc_ahsata: Allow use with dcache enabled |
2013-06-15 |
Eric Nelson |
|
New |
| [U-Boot] ARM: mxs: Make the console buffer smaller |
2013-06-15 |
Marek Vasut |
sbabic |
New |
| [U-Boot,v2,4/4] sf: Warn to use BAR for > 16MiB flashes |
2013-06-15 |
Jagannadha Sutradharudu Teki |
|
New |
| [U-Boot,v2,3/4] sf: Add debug messages on spi_flash_read_common |
2013-06-15 |
Jagannadha Sutradharudu Teki |
|
New |
| [U-Boot,v2,2/4] sf: Place the sf calls in proper order |
2013-06-15 |
Jagannadha Sutradharudu Teki |
|
New |
| [U-Boot,v2,1/4] sf: Unify spi_flash write code |
2013-06-15 |
Jagannadha Sutradharudu Teki |
|
New |
| [U-Boot] gpio: s5p_gpio: Call s5p_gpio_set_value() instead of open-code |
2013-06-15 |
Axel Lin |
prom |
New |
| [U-Boot] gpio: s3c2440_gpio: Fix wrong writel arguments |
2013-06-15 |
Axel Lin |
prom |
New |
| [U-Boot] gpio: altera_pio: Fix inversed logic of gpio_is_valid() implementation |
2013-06-15 |
Axel Lin |
|
New |
| [U-Boot] imx: nitrogen6x: Add splash screen support to nitrogen6x |
2013-06-14 |
Robert Winkler |
|
New |
| [U-Boot,4/4] sf: Warn to use BAR for > 16MiB flashes |
2013-06-14 |
Jagannadha Sutradharudu Teki |
|
New |
| [U-Boot,3/4] sf: Add debug messages on spi_flash_read_common |
2013-06-14 |
Jagannadha Sutradharudu Teki |
|
New |
| [U-Boot,2/4] sf: Place the sf calls in proper order |
2013-06-14 |
Jagannadha Sutradharudu Teki |
|
New |
