Show patches with: State = Action Required       |   1656 patches
« 1 2 3 416 17 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[U-Boot,1/1] virtio: pci: use correct type in virtio_pci_bind() [U-Boot,1/1] virtio: pci: use correct type in virtio_pci_bind() - - - - 0 0 0 2019-10-16 Heinrich Schuchardt New
[U-Boot,v3,2/2] ARM: dts: imx6ull-colibri: pre-reloc for uart pinmux modes imx6ull: Fix missing initial output from UART - 1 2 - 0 0 0 2019-10-16 Igor Opaniuk New
[U-Boot,v3,1/2] ARM: dts: imx6ull-colibri: change hierarchy of DTS files imx6ull: Fix missing initial output from UART - - 2 - 0 0 0 2019-10-16 Igor Opaniuk New
[U-Boot,10/10] imx8mm: evk: enable bd71837 pmic Enable i.MX8MM EVK BD71837 pmic - - - - 0 0 0 2019-10-16 Peng Fan New
[U-Boot,09/10] imx8m: evk: spl: probe clk in spl early stage Enable i.MX8MM EVK BD71837 pmic - - - - 0 0 0 2019-10-16 Peng Fan New
[U-Boot,08/10] power: pmic: Kconfig: add CONFIG_SPL_DM_PMIC_BD71837 Enable i.MX8MM EVK BD71837 pmic - - - - 0 0 0 2019-10-16 Peng Fan New
[U-Boot,07/10] pmic: bd71837: drop DEBUG macro Enable i.MX8MM EVK BD71837 pmic - - - - 0 0 0 2019-10-16 Peng Fan New
[U-Boot,06/10] arm: dts: imx8mm: sync dts from Linux Kernel Enable i.MX8MM EVK BD71837 pmic - - - - 0 0 0 2019-10-16 Peng Fan New
[U-Boot,05/10] dt-bindings: import usb pd Enable i.MX8MM EVK BD71837 pmic - - - - 0 0 0 2019-10-16 Peng Fan New
[U-Boot,04/10] imx: spl: implement spl_boot_mode for i.MX7/8/8M Enable i.MX8MM EVK BD71837 pmic - - - - 0 0 0 2019-10-16 Peng Fan New
[U-Boot,03/10] imx: imx8mq: add init_nand_clk Enable i.MX8MM EVK BD71837 pmic - - - - 0 0 0 2019-10-16 Peng Fan New
[U-Boot,02/10] imx8m: clock: improve irq response latency Enable i.MX8MM EVK BD71837 pmic - - - - 0 0 0 2019-10-16 Peng Fan New
[U-Boot,01/10] imx8m: imx8mq: get chip rev for B1 revision Enable i.MX8MM EVK BD71837 pmic - - - - 0 0 0 2019-10-16 Peng Fan New
[U-Boot,v2] pci: layerscape: remove multiple definitions of SVR [U-Boot,v2] pci: layerscape: remove multiple definitions of SVR - - - - 0 0 0 2019-10-16 Pankaj Bansal New
[U-Boot] arm: freescale: ls102xa: add helper Macro to get the SVR [U-Boot] arm: freescale: ls102xa: add helper Macro to get the SVR - - - - 0 0 0 2019-10-16 Pankaj Bansal New
[U-Boot,6/6] powerpc: t4240: dts: Added Sata DT nodes [U-Boot,1/6] powerpc: p2041: dts: Added Sata DT nodes - - - - 0 0 0 2019-10-16 Peng Ma New
[U-Boot,5/6] powerpc: t104x: dts: Added Sata DT nodes [U-Boot,1/6] powerpc: p2041: dts: Added Sata DT nodes - - - - 0 0 0 2019-10-16 Peng Ma New
[U-Boot,4/6] powerpc: t102x: dts: Added Sata DT nodes [U-Boot,1/6] powerpc: p2041: dts: Added Sata DT nodes - - - - 0 0 0 2019-10-16 Peng Ma New
[U-Boot,3/6] powerpc: p5040: dts: Added Sata DT nodes [U-Boot,1/6] powerpc: p2041: dts: Added Sata DT nodes - - - - 0 0 0 2019-10-16 Peng Ma New
[U-Boot,2/6] powerpc: p3041: dts: Added Sata DT nodes [U-Boot,1/6] powerpc: p2041: dts: Added Sata DT nodes - - - - 0 0 0 2019-10-16 Peng Ma New
[U-Boot,1/6] powerpc: p2041: dts: Added Sata DT nodes [U-Boot,1/6] powerpc: p2041: dts: Added Sata DT nodes - - - - 0 0 0 2019-10-16 Peng Ma New
[U-Boot] rockchip: firefly-rk3288: Enable TPL support [U-Boot] rockchip: firefly-rk3288: Enable TPL support - - - - 0 0 0 2019-10-16 Kever Yang New
[U-Boot] dm: core: Update log method for uclass_find_device_by_seq [U-Boot] dm: core: Update log method for uclass_find_device_by_seq - - - - 0 0 0 2019-10-16 Kever Yang New
[U-Boot,2/2] rockchip: Init driver otg_data for rk3288 usb phy [U-Boot,1/2] rockchip: usb: Migrate to use ofnode - - - - 0 0 0 2019-10-16 Kever Yang New
[U-Boot,1/2] rockchip: usb: Migrate to use ofnode [U-Boot,1/2] rockchip: usb: Migrate to use ofnode - - - - 0 0 0 2019-10-16 Kever Yang New
[U-Boot,3/3] rockchip: rk3328: call sdram_print_ddr_info() at init rockchip: rk3328: add CONFIG_RAM_ROCKCHIP_DEBUG support - - - - 0 0 0 2019-10-16 Matwey V. Kornilov New
[U-Boot,2/3] rockchip: rk3328: use common struct sdram_cap_info for struct rk3328_sdram_channel rockchip: rk3328: add CONFIG_RAM_ROCKCHIP_DEBUG support - - - - 0 0 0 2019-10-16 Matwey V. Kornilov New
[U-Boot,1/3] rockchip: rk3328: use common struct sdram_base_params for struct rk3328_sdram_params rockchip: rk3328: add CONFIG_RAM_ROCKCHIP_DEBUG support - - - - 0 0 0 2019-10-16 Matwey V. Kornilov New
[U-Boot,19/19] configs: P5040: enable CONFIG_DM_USB support [U-Boot,01/19] arch: powerpc: add usb node in p3041 dts - - - - 0 0 0 2019-10-16 Ran Wang New
[U-Boot,18/19] arch: powerpc: add usb nodes to P5040 dts [U-Boot,01/19] arch: powerpc: add usb node in p3041 dts - - - - 0 0 0 2019-10-16 Ran Wang New
[U-Boot,17/19] configs: T4240: enable CONFIG_DM_USB support [U-Boot,01/19] arch: powerpc: add usb node in p3041 dts - - - - 0 0 0 2019-10-16 Ran Wang New
[U-Boot,16/19] arch: powerpc: add usb nodes to T4240 dts [U-Boot,01/19] arch: powerpc: add usb node in p3041 dts - - - - 0 0 0 2019-10-16 Ran Wang New
[U-Boot,15/19] configs: T208x: enable CONFIG_DM_USB support [U-Boot,01/19] arch: powerpc: add usb node in p3041 dts - - - - 0 0 0 2019-10-16 Ran Wang New
[U-Boot,14/19] configs: T104x: enable CONFIG_DM_USB support [U-Boot,01/19] arch: powerpc: add usb node in p3041 dts - - - - 0 0 0 2019-10-16 Ran Wang New
[U-Boot,13/19] arch: powerpc: add usb nodes to T104x dts [U-Boot,01/19] arch: powerpc: add usb node in p3041 dts - - - - 0 0 0 2019-10-16 Ran Wang New
[U-Boot,12/19] configs: T102x: enable CONFIG_DM_USB support [U-Boot,01/19] arch: powerpc: add usb node in p3041 dts - - - - 0 0 0 2019-10-16 Ran Wang New
[U-Boot,11/19] powerpc: add usb nodes to T102x dts [U-Boot,01/19] arch: powerpc: add usb node in p3041 dts - - - - 0 0 0 2019-10-16 Ran Wang New
[U-Boot,10/19] configs: P4080: enable CONFIG_DM_USB support [U-Boot,01/19] arch: powerpc: add usb node in p3041 dts - - - - 0 0 0 2019-10-16 Ran Wang New
[U-Boot,09/19] arch: powerpc: add usb nodes to P4080 dts [U-Boot,01/19] arch: powerpc: add usb node in p3041 dts - - - - 0 0 0 2019-10-16 Ran Wang New
[U-Boot,08/19] configs: P2041: enable CONFIG_DM_USB support [U-Boot,01/19] arch: powerpc: add usb node in p3041 dts - - - - 0 0 0 2019-10-16 Ran Wang New
[U-Boot,07/19] arch: powerpc: add usb node to p2041 dts [U-Boot,01/19] arch: powerpc: add usb node in p3041 dts - - - - 0 0 0 2019-10-16 Ran Wang New
[U-Boot,06/19] configs: P2020: enable CONFIG_DM_USB support [U-Boot,01/19] arch: powerpc: add usb node in p3041 dts - - - - 0 0 0 2019-10-16 Ran Wang New
[U-Boot,05/19] arch: powerpc: add usb node to p2020 dts [U-Boot,01/19] arch: powerpc: add usb node in p3041 dts - - - - 0 0 0 2019-10-16 Ran Wang New
[U-Boot,04/19] configs: p1020: enable CONFIG_DM_USB support [U-Boot,01/19] arch: powerpc: add usb node in p3041 dts - - - - 0 0 0 2019-10-16 Ran Wang New
[U-Boot,03/19] arch: powerpc: add usb nodes to P1020 dts [U-Boot,01/19] arch: powerpc: add usb node in p3041 dts - - - - 0 0 0 2019-10-16 Ran Wang New
[U-Boot,02/19] configs: p3041ds: enable CONFIG_DM_USB support [U-Boot,01/19] arch: powerpc: add usb node in p3041 dts - - - - 0 0 0 2019-10-16 Ran Wang New
[U-Boot,01/19] arch: powerpc: add usb node in p3041 dts [U-Boot,01/19] arch: powerpc: add usb node in p3041 dts - - - - 0 0 0 2019-10-16 Ran Wang New
[U-Boot,v2] nvme: use page-aligned buffer for identify command [U-Boot,v2] nvme: use page-aligned buffer for identify command - - 1 - 0 0 0 2019-10-16 Patrick Wildt New
[U-Boot,v2,9/9] mpc85xx, socrates: add DM PCI support powerpc: convert socrates board to DM - - - - 0 0 0 2019-10-16 Heiko Schocher New
[U-Boot,v2,8/9] mpc85xx, socrates: enable DM serial powerpc: convert socrates board to DM - - - - 0 0 0 2019-10-16 Heiko Schocher New
[U-Boot,v2,7/9] mpc85xx, socrates: enable DM I2C powerpc: convert socrates board to DM - - - - 0 0 0 2019-10-16 Heiko Schocher New
[U-Boot,v2,6/9] mpc85xx, socrates: disable VIDEO powerpc: convert socrates board to DM - - - - 0 0 0 2019-10-16 Heiko Schocher New
[U-Boot,v2,5/9] mpc85xx, socrates: get rid of DM_USB warning powerpc: convert socrates board to DM - - - - 0 0 0 2019-10-16 Heiko Schocher New
[U-Boot,v2,4/9] mpc85xx, socrates: add DM support powerpc: convert socrates board to DM - - - - 0 0 0 2019-10-16 Heiko Schocher New
[U-Boot,v2,3/9] mpc85xx, dts, socrates: add u-boot specific dtsi powerpc: convert socrates board to DM - - - - 0 0 0 2019-10-16 Heiko Schocher New
[U-Boot,v2,2/9] mpc85xx: add socrates dts from linux powerpc: convert socrates board to DM - - - - 0 0 0 2019-10-16 Heiko Schocher New
[U-Boot,v2,1/9] mpc85xx, socrates: suppress unknown flash warning powerpc: convert socrates board to DM - - - - 0 0 0 2019-10-16 Heiko Schocher New
[U-Boot] imx: imx8m: fix boot when CONFIG_$(SPL_)CLK not defined [U-Boot] imx: imx8m: fix boot when CONFIG_$(SPL_)CLK not defined - - 1 1 0 0 0 2019-10-16 Peng Fan New
[U-Boot] lib: time: Add microsecond timer [U-Boot] lib: time: Add microsecond timer - - - - 0 0 0 2019-10-15 Marek Vasut New
[U-Boot] ARM: rmobile: Enable CONFIG_ARCH_FIXUP_FDT_MEMORY on Gen3 [U-Boot] ARM: rmobile: Enable CONFIG_ARCH_FIXUP_FDT_MEMORY on Gen3 - - - - 0 0 0 2019-10-15 Marek Vasut New
[U-Boot,RFC,v2,18/18] socfpga: gen5: move CLK and SDRAM to DM arm: socfpga: gen5: move to DM - - - - 0 0 0 2019-10-15 Simon Goldschmidt New
[U-Boot,RFC,v2,17/18] arm: socfpga: gen5: parse qspi clock from devictree arm: socfpga: gen5: move to DM - - - - 0 0 0 2019-10-15 Simon Goldschmidt New
[U-Boot,RFC,v2,16/18] spi: cadence_qspi: support DM_CLK arm: socfpga: gen5: move to DM - - - - 0 0 0 2019-10-15 Simon Goldschmidt New
[U-Boot,RFC,v2,15/18] arm: socfpga: gen5: load CLK config from devicetree arm: socfpga: gen5: move to DM - - - - 0 0 0 2019-10-15 Simon Goldschmidt New
[U-Boot,RFC,v2,14/18] arm: socfpga: gen5: move clock initialization to CLK driver arm: socfpga: gen5: move to DM - - - - 0 0 0 2019-10-15 Simon Goldschmidt New
[U-Boot,RFC,v2,13/18] arm: socfpga: gen5: enable DM CLK arm: socfpga: gen5: move to DM - - - - 0 0 0 2019-10-15 Simon Goldschmidt New
[U-Boot,RFC,v2,12/18] arm: socfpga: gen5: add readonly clk driver arm: socfpga: gen5: move to DM - - - - 0 0 0 2019-10-15 Simon Goldschmidt New
[U-Boot,RFC,v2,11/18] ddr: socfpga: gen5: read handoff information from devicetree arm: socfpga: gen5: move to DM - - - - 0 0 0 2019-10-15 Simon Goldschmidt New
[U-Boot,RFC,v2,10/18] ddr: socfpga: gen5: fetch handoff information from 'of_to_platdata' arm: socfpga: gen5: move to DM - - - - 0 0 0 2019-10-15 Simon Goldschmidt New
[U-Boot,RFC,v2,09/18] sdram: socfpga: gen5: make config structs dts compatible arm: socfpga: gen5: move to DM - - - - 0 0 0 2019-10-15 Simon Goldschmidt New
[U-Boot,RFC,v2,08/18] socfpga: gen5: add new tool to create handoff dtsi files arm: socfpga: gen5: move to DM - - - - 0 0 0 2019-10-15 Simon Goldschmidt New
[U-Boot,RFC,v2,07/18] arm: dts: socfpga: make clock nodes available in SPL arm: socfpga: gen5: move to DM - - - - 0 0 0 2019-10-15 Simon Goldschmidt New
[U-Boot,RFC,v2,06/18] arm: dts: socfpga: add settings for gen5 clk driver arm: socfpga: gen5: move to DM - - - - 0 0 0 2019-10-15 Simon Goldschmidt New
[U-Boot,RFC,v2,05/18] arm: socfpga: gen5: move initial reset handling to reset driver arm: socfpga: gen5: move to DM - - - - 0 0 0 2019-10-15 Simon Goldschmidt New
[U-Boot,RFC,v2,04/18] timer: dw-apb: add reset handling arm: socfpga: gen5: move to DM - - - - 0 0 0 2019-10-15 Simon Goldschmidt New
[U-Boot,RFC,v2,03/18] arm: socfpga: gen5: increase SPL_SYS_MALLOC_F_LEN arm: socfpga: gen5: move to DM - - - - 0 0 0 2019-10-15 Simon Goldschmidt New
[U-Boot,RFC,v2,02/18] dts: arm: socfpga: add label for clkmgr arm: socfpga: gen5: move to DM - - - - 0 0 0 2019-10-15 Simon Goldschmidt New
[U-Boot,RFC,v2,01/18] ddr: socfpga: gen5: constify altera_gen5_sdram_ops arm: socfpga: gen5: move to DM - - - - 0 0 0 2019-10-15 Simon Goldschmidt New
[U-Boot,v2,2/2] test: provide test for errno_str() lib: errno: check for unsupported error number - - 1 - 0 0 0 2019-10-15 Heinrich Schuchardt trini New
[U-Boot,v2,1/2] lib: errno: check for unsupported error number lib: errno: check for unsupported error number - - 1 - 0 0 0 2019-10-15 Heinrich Schuchardt trini New
[U-Boot,1/1] disk: part_dos: correctly detect DOS PBR [U-Boot,1/1] disk: part_dos: correctly detect DOS PBR - - - - 0 0 0 2019-10-15 Heinrich Schuchardt trini New
[U-Boot] arm: mxs: Increase VDDD voltage to match specification [U-Boot] arm: mxs: Increase VDDD voltage to match specification - - - - 0 0 0 2019-10-15 Marek Vasut New
[U-Boot,37/37] board: ge: bx50v3: use DM PMIC driver convert GE boards to DM - - - - 0 0 0 2019-10-15 Robert Beckett New
[U-Boot,36/37] dm: pmic: add da9063 PMIC driver and regulators convert GE boards to DM - - - - 0 0 0 2019-10-15 Robert Beckett New
[U-Boot,35/37] board: ge: mx53ppd: use DM for uart convert GE boards to DM - - - - 0 0 0 2019-10-15 Robert Beckett New
[U-Boot,34/37] serial: mxc: add imx53 and imx21 compatible string convert GE boards to DM - - - - 0 0 0 2019-10-15 Robert Beckett New
[U-Boot,33/37] board: ge: bx50v3: use DM for uart convert GE boards to DM - - - - 0 0 0 2019-10-15 Robert Beckett New
[U-Boot,32/37] board: ge: mx53ppd: Use DM for ethernet convert GE boards to DM - - - - 0 0 0 2019-10-15 Robert Beckett New
[U-Boot,31/37] board: ge: mx53ppd: clean up DM PWM video and backlight convert GE boards to DM - - - - 0 0 0 2019-10-15 Robert Beckett New
[U-Boot,30/37] board: ge: bx50v3: Enable DM PWM for backlight convert GE boards to DM - - - - 0 0 0 2019-10-15 Robert Beckett New
[U-Boot,29/37] board: ge: mx53ppd: fix RTC compatible definition convert GE boards to DM - - - - 0 0 0 2019-10-15 Robert Beckett New
[U-Boot,28/37] rtc: s35392a: encode command correctly convert GE boards to DM - - - - 0 0 0 2019-10-15 Robert Beckett New
[U-Boot,27/37] board: ge: mx53ppd: enable DM_VIDEO convert GE boards to DM - - - - 0 0 0 2019-10-15 Robert Beckett New
[U-Boot,26/37] board: ge: mx53ppd: move uart initialisation to own function convert GE boards to DM - - - - 0 0 0 2019-10-15 Robert Beckett New
[U-Boot,25/37] board: ge: bx50v3, mx53ppd: disable I2C compatibility API convert GE boards to DM - - - - 0 0 0 2019-10-15 Robert Beckett New
[U-Boot,24/37] board: ge: mx53ppd: remove redundant power config convert GE boards to DM - - - - 0 0 0 2019-10-15 Robert Beckett New
[U-Boot,23/37] board: ge: bx50v3: use DM i2c for PMIC initialization convert GE boards to DM - - - - 0 0 0 2019-10-15 Robert Beckett New
[U-Boot,22/37] board: ge: bx50v3, mx53ppd: use DM rtc convert GE boards to DM - - - - 0 0 0 2019-10-15 Robert Beckett New
[U-Boot,21/37] rtc: rx8010sj: fix DM initialization convert GE boards to DM - - - - 0 0 0 2019-10-15 Robert Beckett New
[U-Boot,20/37] board: ge: mx53ppd: add i2c eeprom bootcount storage convert GE boards to DM - - - - 0 0 0 2019-10-15 Robert Beckett New
« 1 2 3 416 17 »