mbox series

[RFC,0/3] imx8m: Remove manual UART clock initialization

Message ID 20220430161422.558361-1-aford173@gmail.com
Headers show
Series imx8m: Remove manual UART clock initialization | expand

Message

Adam Ford April 30, 2022, 4:14 p.m. UTC 
This series is an RFC focussing on only the i.MX8M Mini until
feedback is received when the series can be expanded to other
imx boards.

This series adds the UART clocks to the CCF, adds functions to
the serial driver to fetch, enable, and query the clock(s),
and finally removes the manual clock intialization from SPL.

Once feedback is received and final method is accepted, it can
be expanded to other boards.

Adam Ford (3):
  clk: imx8mm: Add UART clocks
  serial: mxc: Enable getting and enabling clocks with CCF Composite
  imx8: imx8mm_beacon: Remove manual UART clock initialization

 board/beacon/imx8mm/spl.c             |  2 --
 drivers/clk/imx/clk-imx8mm.c          | 30 +++++++++++++++++++++
 drivers/serial/serial_mxc.c           | 39 ++++++++++++++++++++++++++-
 include/dm/platform_data/serial_mxc.h |  2 ++
 4 files changed, 70 insertions(+), 3 deletions(-)