mbox series

[U-Boot,v3,0/2] Add Broadcom XHCI driver for iproc platforms

Message ID 20191126184136.17370-1-vladimir.olovyannikov@broadcom.com
Headers show
Series Add Broadcom XHCI driver for iproc platforms | expand

Message

Vladimir Olovyannikov Nov. 26, 2019, 6:41 p.m. UTC 
This patchset adds Broadcom XHCI driver for iproc platforms.
This USB controller is based on the Broadcom USB3 IP Core.
Supports USB2/3 functionality.

Bharat Kumar Reddy Gooty (2):
  dt-bindings: Documentation on BRCM xHCI controller
  drivers: usb: host: Add BRCM xHCI driver

 .../bindings/usb/brcm,generic-xhci.txt        |  12 ++
 drivers/usb/host/Kconfig                      |   8 ++
 drivers/usb/host/Makefile                     |   1 +
 drivers/usb/host/xhci-brcm.c                  | 105 ++++++++++++++++++
 4 files changed, 126 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/brcm,generic-xhci.txt
 create mode 100644 drivers/usb/host/xhci-brcm.c

--
2.17.1