| Message ID | a01b6cdbae01fff77e26f7a5c40ee5260e1952b5.1617375802.git.christophe.leroy@csgroup.eu |
|---|---|
| State | New |
| Headers | show |
| Series | Implement GENERIC_CMDLINE | expand |
On Fri, Apr 02, 2021 at 03:18:21PM +0000, Christophe Leroy wrote: > -config CMDLINE_BOOL > - bool "Built-in kernel command line" > - help > - For most systems, it is firmware or second stage bootloader that > - by default specifies the kernel command line options. However, > - it might be necessary or advantageous to either override the > - default kernel command line or add a few extra options to it. > - For such cases, this option allows you to hardcode your own > - command line options directly into the kernel. For that, you > - should choose 'Y' here, and fill in the extra boot arguments > - in CONFIG_CMDLINE. > - > - The built-in options will be concatenated to the default command > - line if CMDLINE_OVERRIDE is set to 'N'. Otherwise, the default > - command line will be ignored and replaced by the built-in string. > - > - Most MIPS systems will normally expect 'N' here and rely upon > - the command line from the firmware or the second-stage bootloader. > - See how you complained that I have CMDLINE_BOOL in my changed, and you think it shouldn't exist. Yet here mips has it, and you just deleted it with no feature parity in your changes for this. In my changes I tried to maintain as much feature parity as I could with the architectures. I did the same huge conversion a long time ago you've done here to be sure all platforms have the features needed. Daniel
On Tue, Apr 06, 2021 at 10:38:36AM -0700, Daniel Walker wrote: > On Fri, Apr 02, 2021 at 03:18:21PM +0000, Christophe Leroy wrote: > > -config CMDLINE_BOOL > > - bool "Built-in kernel command line" > > - help > > - For most systems, it is firmware or second stage bootloader that > > - by default specifies the kernel command line options. However, > > - it might be necessary or advantageous to either override the > > - default kernel command line or add a few extra options to it. > > - For such cases, this option allows you to hardcode your own > > - command line options directly into the kernel. For that, you > > - should choose 'Y' here, and fill in the extra boot arguments > > - in CONFIG_CMDLINE. > > - > > - The built-in options will be concatenated to the default command > > - line if CMDLINE_OVERRIDE is set to 'N'. Otherwise, the default > > - command line will be ignored and replaced by the built-in string. > > - > > - Most MIPS systems will normally expect 'N' here and rely upon > > - the command line from the firmware or the second-stage bootloader. > > - > > > See how you complained that I have CMDLINE_BOOL in my changed, and you think it > shouldn't exist. > > Yet here mips has it, and you just deleted it with no feature parity in your > changes for this. AFAICT, CMDLINE_BOOL equates to a non-empty or empty CONFIG_CMDLINE. You seem to need it just because you have CMDLINE_PREPEND and CMDLINE_APPEND. If that's not it, what feature is missing? CMDLINE_BOOL is not a feature, but an implementation detail. Rob
On Thu, Apr 08, 2021 at 02:04:08PM -0500, Rob Herring wrote: > On Tue, Apr 06, 2021 at 10:38:36AM -0700, Daniel Walker wrote: > > On Fri, Apr 02, 2021 at 03:18:21PM +0000, Christophe Leroy wrote: > > > -config CMDLINE_BOOL > > > - bool "Built-in kernel command line" > > > - help > > > - For most systems, it is firmware or second stage bootloader that > > > - by default specifies the kernel command line options. However, > > > - it might be necessary or advantageous to either override the > > > - default kernel command line or add a few extra options to it. > > > - For such cases, this option allows you to hardcode your own > > > - command line options directly into the kernel. For that, you > > > - should choose 'Y' here, and fill in the extra boot arguments > > > - in CONFIG_CMDLINE. > > > - > > > - The built-in options will be concatenated to the default command > > > - line if CMDLINE_OVERRIDE is set to 'N'. Otherwise, the default > > > - command line will be ignored and replaced by the built-in string. > > > - > > > - Most MIPS systems will normally expect 'N' here and rely upon > > > - the command line from the firmware or the second-stage bootloader. > > > - > > > > > > See how you complained that I have CMDLINE_BOOL in my changed, and you think it > > shouldn't exist. > > > > Yet here mips has it, and you just deleted it with no feature parity in your > > changes for this. > > AFAICT, CMDLINE_BOOL equates to a non-empty or empty CONFIG_CMDLINE. You > seem to need it just because you have CMDLINE_PREPEND and > CMDLINE_APPEND. If that's not it, what feature is missing? CMDLINE_BOOL > is not a feature, but an implementation detail. Not true. It makes it easier to turn it all off inside the Kconfig , so it's for usability and multiple architecture have it even with just CMDLINE as I was commenting here. Daniel
Le 09/04/2021 à 03:23, Daniel Walker a écrit : > On Thu, Apr 08, 2021 at 02:04:08PM -0500, Rob Herring wrote: >> On Tue, Apr 06, 2021 at 10:38:36AM -0700, Daniel Walker wrote: >>> On Fri, Apr 02, 2021 at 03:18:21PM +0000, Christophe Leroy wrote: >>>> -config CMDLINE_BOOL >>>> - bool "Built-in kernel command line" >>>> - help >>>> - For most systems, it is firmware or second stage bootloader that >>>> - by default specifies the kernel command line options. However, >>>> - it might be necessary or advantageous to either override the >>>> - default kernel command line or add a few extra options to it. >>>> - For such cases, this option allows you to hardcode your own >>>> - command line options directly into the kernel. For that, you >>>> - should choose 'Y' here, and fill in the extra boot arguments >>>> - in CONFIG_CMDLINE. >>>> - >>>> - The built-in options will be concatenated to the default command >>>> - line if CMDLINE_OVERRIDE is set to 'N'. Otherwise, the default >>>> - command line will be ignored and replaced by the built-in string. >>>> - >>>> - Most MIPS systems will normally expect 'N' here and rely upon >>>> - the command line from the firmware or the second-stage bootloader. >>>> - >>> >>> >>> See how you complained that I have CMDLINE_BOOL in my changed, and you think it >>> shouldn't exist. >>> >>> Yet here mips has it, and you just deleted it with no feature parity in your >>> changes for this. >> >> AFAICT, CMDLINE_BOOL equates to a non-empty or empty CONFIG_CMDLINE. You >> seem to need it just because you have CMDLINE_PREPEND and >> CMDLINE_APPEND. If that's not it, what feature is missing? CMDLINE_BOOL >> is not a feature, but an implementation detail. > > Not true. > > It makes it easier to turn it all off inside the Kconfig , so it's for usability > and multiple architecture have it even with just CMDLINE as I was commenting > here. > Among the 13 architectures having CONFIG_CMDLINE, todayb only 6 have a CONFIG_CMDLINE_BOOL in addition: arch/arm/Kconfig:config CMDLINE arch/arm64/Kconfig:config CMDLINE arch/hexagon/Kconfig:config CMDLINE arch/microblaze/Kconfig:config CMDLINE arch/mips/Kconfig.debug:config CMDLINE arch/nios2/Kconfig:config CMDLINE arch/openrisc/Kconfig:config CMDLINE arch/powerpc/Kconfig:config CMDLINE arch/riscv/Kconfig:config CMDLINE arch/sh/Kconfig:config CMDLINE arch/sparc/Kconfig:config CMDLINE arch/x86/Kconfig:config CMDLINE arch/xtensa/Kconfig:config CMDLINE arch/microblaze/Kconfig:config CMDLINE_BOOL arch/mips/Kconfig.debug:config CMDLINE_BOOL arch/nios2/Kconfig:config CMDLINE_BOOL arch/sparc/Kconfig:config CMDLINE_BOOL arch/x86/Kconfig:config CMDLINE_BOOL arch/xtensa/Kconfig:config CMDLINE_BOOL In the begining I hesitated about the CMDLINE_BOOL, at the end I decided to go the same way as what is done today in the kernel for initramfs with CONFIG_INITRAMFS_SOURCE. The problem I see within adding CONFIG_CMDLINE_BOOL for every architecture which don't have it today is that when doing a "make oldconfig" on their custom configs, thousands of users will loose their CMDLINE without notice. When we do the other way round, removing CONFIG_CMDLINE_BOOL on the 6 architectures that have it today will have no impact on existing config. Also, in order to avoid tons of #ifdefs in the code as mandated by Kernel Codying Style §21, we have to have CONFIG_CMDLINE defined at all time, so at the end CONFIG_CMDLINE_BOOL is really redundant with an empty CONFIG_CMDLINE. Unlike you, the approach I took for my series is to minimise the impact on existing implementation and existing configurations as much as possible. I know you have a different approach where you break every existing config anyway. https://www.kernel.org/doc/html/latest/process/coding-style.html#conditional-compilation Christophe
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index d89efba3d8a4..a65ce9ddbfce 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -24,6 +24,7 @@ config MIPS select CPU_NO_EFFICIENT_FFS if (TARGET_ISA_REV < 1) select CPU_PM if CPU_IDLE select GENERIC_ATOMIC64 if !64BIT + select GENERIC_CMDLINE select GENERIC_CMOS_UPDATE select GENERIC_CPU_AUTOPROBE select GENERIC_GETTIMEOFDAY diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug index 7a8d94cdd493..b5a099c74eb6 100644 --- a/arch/mips/Kconfig.debug +++ b/arch/mips/Kconfig.debug @@ -30,50 +30,6 @@ config EARLY_PRINTK_8250 config USE_GENERIC_EARLY_PRINTK_8250 bool -config CMDLINE_BOOL - bool "Built-in kernel command line" - help - For most systems, it is firmware or second stage bootloader that - by default specifies the kernel command line options. However, - it might be necessary or advantageous to either override the - default kernel command line or add a few extra options to it. - For such cases, this option allows you to hardcode your own - command line options directly into the kernel. For that, you - should choose 'Y' here, and fill in the extra boot arguments - in CONFIG_CMDLINE. - - The built-in options will be concatenated to the default command - line if CMDLINE_OVERRIDE is set to 'N'. Otherwise, the default - command line will be ignored and replaced by the built-in string. - - Most MIPS systems will normally expect 'N' here and rely upon - the command line from the firmware or the second-stage bootloader. - -config CMDLINE - string "Default kernel command string" - depends on CMDLINE_BOOL - help - On some platforms, there is currently no way for the boot loader to - pass arguments to the kernel. For these platforms, and for the cases - when you want to add some extra options to the command line or ignore - the default command line, you can supply some command-line options at - build time by entering them here. In other cases you can specify - kernel args so that you don't have to set them up in board prom - initialization routines. - - For more information, see the CMDLINE_BOOL and CMDLINE_OVERRIDE - options. - -config CMDLINE_OVERRIDE - bool "Built-in command line overrides firmware arguments" - depends on CMDLINE_BOOL - help - By setting this option to 'Y' you will have your kernel ignore - command line arguments from firmware or second stage bootloader. - Instead, the built-in command line will be used exclusively. - - Normally, you will choose 'N' here. - config SB1XXX_CORELIS bool "Corelis Debugger" depends on SIBYTE_SB1xxx_SOC diff --git a/arch/mips/configs/ar7_defconfig b/arch/mips/configs/ar7_defconfig index cf9c6329b807..5e8adcd799d0 100644 --- a/arch/mips/configs/ar7_defconfig +++ b/arch/mips/configs/ar7_defconfig @@ -120,5 +120,4 @@ CONFIG_SQUASHFS=y # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_STRIP_ASM_SYMS=y CONFIG_DEBUG_FS=y -CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="rootfstype=squashfs,jffs2" diff --git a/arch/mips/configs/bcm47xx_defconfig b/arch/mips/configs/bcm47xx_defconfig index 91ce75edbfb4..690f423509f0 100644 --- a/arch/mips/configs/bcm47xx_defconfig +++ b/arch/mips/configs/bcm47xx_defconfig @@ -77,5 +77,4 @@ CONFIG_DEBUG_INFO_REDUCED=y CONFIG_STRIP_ASM_SYMS=y CONFIG_DEBUG_FS=y CONFIG_MAGIC_SYSRQ=y -CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyS0,115200" diff --git a/arch/mips/configs/bcm63xx_defconfig b/arch/mips/configs/bcm63xx_defconfig index 861f680184b9..19b15424f669 100644 --- a/arch/mips/configs/bcm63xx_defconfig +++ b/arch/mips/configs/bcm63xx_defconfig @@ -65,5 +65,4 @@ CONFIG_PROC_KCORE=y # CONFIG_NETWORK_FILESYSTEMS is not set # CONFIG_CRYPTO_HW is not set CONFIG_MAGIC_SYSRQ=y -CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyS0,115200" diff --git a/arch/mips/configs/bmips_be_defconfig b/arch/mips/configs/bmips_be_defconfig index 032bb51defe8..2db7712acc5d 100644 --- a/arch/mips/configs/bmips_be_defconfig +++ b/arch/mips/configs/bmips_be_defconfig @@ -75,5 +75,4 @@ CONFIG_NLS_ISO8859_1=y CONFIG_PRINTK_TIME=y CONFIG_DEBUG_FS=y CONFIG_MAGIC_SYSRQ=y -CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="earlycon" diff --git a/arch/mips/configs/bmips_stb_defconfig b/arch/mips/configs/bmips_stb_defconfig index 625bd2d7e685..bc1659d43ca7 100644 --- a/arch/mips/configs/bmips_stb_defconfig +++ b/arch/mips/configs/bmips_stb_defconfig @@ -86,5 +86,4 @@ CONFIG_NLS_ISO8859_1=y CONFIG_PRINTK_TIME=y CONFIG_DEBUG_FS=y CONFIG_MAGIC_SYSRQ=y -CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="earlycon" diff --git a/arch/mips/configs/capcella_defconfig b/arch/mips/configs/capcella_defconfig index 7bf8971af53b..300032a5caa0 100644 --- a/arch/mips/configs/capcella_defconfig +++ b/arch/mips/configs/capcella_defconfig @@ -87,5 +87,4 @@ CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_DEFLATE=m # CONFIG_CRYPTO_HW is not set -CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="mem=32M console=ttyVR0,38400" diff --git a/arch/mips/configs/ci20_defconfig b/arch/mips/configs/ci20_defconfig index ab7ebb066834..f874e421b54f 100644 --- a/arch/mips/configs/ci20_defconfig +++ b/arch/mips/configs/ci20_defconfig @@ -203,5 +203,4 @@ CONFIG_PANIC_TIMEOUT=10 # CONFIG_DEBUG_PREEMPT is not set CONFIG_STACKTRACE=y # CONFIG_FTRACE is not set -CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="earlycon console=ttyS4,115200 clk_ignore_unused" diff --git a/arch/mips/configs/cu1000-neo_defconfig b/arch/mips/configs/cu1000-neo_defconfig index 9d75f5b77d5d..03cb524967e7 100644 --- a/arch/mips/configs/cu1000-neo_defconfig +++ b/arch/mips/configs/cu1000-neo_defconfig @@ -123,5 +123,4 @@ CONFIG_PANIC_TIMEOUT=10 # CONFIG_DEBUG_PREEMPT is not set CONFIG_STACKTRACE=y # CONFIG_FTRACE is not set -CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="earlycon clk_ignore_unused" diff --git a/arch/mips/configs/cu1830-neo_defconfig b/arch/mips/configs/cu1830-neo_defconfig index 29decd0003c6..d733ccab494e 100644 --- a/arch/mips/configs/cu1830-neo_defconfig +++ b/arch/mips/configs/cu1830-neo_defconfig @@ -126,5 +126,4 @@ CONFIG_PANIC_TIMEOUT=10 # CONFIG_DEBUG_PREEMPT is not set CONFIG_STACKTRACE=y # CONFIG_FTRACE is not set -CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="earlycon clk_ignore_unused" diff --git a/arch/mips/configs/e55_defconfig b/arch/mips/configs/e55_defconfig index fd82b858a8f0..ffc964d1bae7 100644 --- a/arch/mips/configs/e55_defconfig +++ b/arch/mips/configs/e55_defconfig @@ -33,5 +33,4 @@ CONFIG_AUTOFS4_FS=y CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y -CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x1f0,0x3f6,40 mem=8M" diff --git a/arch/mips/configs/generic_defconfig b/arch/mips/configs/generic_defconfig index 714169e411cf..6003f6c7aa09 100644 --- a/arch/mips/configs/generic_defconfig +++ b/arch/mips/configs/generic_defconfig @@ -88,5 +88,4 @@ CONFIG_DEBUG_INFO_REDUCED=y CONFIG_DEBUG_FS=y # CONFIG_SCHED_DEBUG is not set # CONFIG_FTRACE is not set -CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="earlycon" diff --git a/arch/mips/configs/gpr_defconfig b/arch/mips/configs/gpr_defconfig index 5cb91509bb7c..8998d28b94c8 100644 --- a/arch/mips/configs/gpr_defconfig +++ b/arch/mips/configs/gpr_defconfig @@ -306,5 +306,4 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_DEFLATE=m # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_MAGIC_SYSRQ=y -CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs rw ip=auto" diff --git a/arch/mips/configs/loongson3_defconfig b/arch/mips/configs/loongson3_defconfig index 0e79f81217bc..c4f9a236bd1f 100644 --- a/arch/mips/configs/loongson3_defconfig +++ b/arch/mips/configs/loongson3_defconfig @@ -408,5 +408,4 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_SCHED_DEBUG is not set # CONFIG_DEBUG_PREEMPT is not set # CONFIG_FTRACE is not set -CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="ieee754=relaxed" diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig index d4e038802510..6ecef2a666fc 100644 --- a/arch/mips/configs/mpc30x_defconfig +++ b/arch/mips/configs/mpc30x_defconfig @@ -49,5 +49,4 @@ CONFIG_AUTOFS4_FS=y CONFIG_PROC_KCORE=y CONFIG_CONFIGFS_FS=m CONFIG_NFS_FS=y -CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="mem=32M console=ttyVR0,19200 ide0=0x170,0x376,73" diff --git a/arch/mips/configs/rt305x_defconfig b/arch/mips/configs/rt305x_defconfig index fec5851c164b..c34441ce6621 100644 --- a/arch/mips/configs/rt305x_defconfig +++ b/arch/mips/configs/rt305x_defconfig @@ -147,4 +147,3 @@ CONFIG_DEBUG_FS=y CONFIG_MAGIC_SYSRQ=y # CONFIG_SCHED_DEBUG is not set # CONFIG_FTRACE is not set -CONFIG_CMDLINE_BOOL=y diff --git a/arch/mips/configs/tb0219_defconfig b/arch/mips/configs/tb0219_defconfig index 6547f84750b5..ccf20bd156a1 100644 --- a/arch/mips/configs/tb0219_defconfig +++ b/arch/mips/configs/tb0219_defconfig @@ -73,5 +73,4 @@ CONFIG_NFS_FS=y CONFIG_ROOT_NFS=y CONFIG_NFSD=y CONFIG_NFSD_V3=y -CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="cca=3 mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs" diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig index 7e099f7c2286..9f78fd00a4f6 100644 --- a/arch/mips/configs/tb0226_defconfig +++ b/arch/mips/configs/tb0226_defconfig @@ -68,5 +68,4 @@ CONFIG_NFS_FS=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="cca=3 mem=32M console=ttyVR0,115200" diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig index 0d881dd862c0..5529d0dacf94 100644 --- a/arch/mips/configs/tb0287_defconfig +++ b/arch/mips/configs/tb0287_defconfig @@ -81,5 +81,4 @@ CONFIG_NFSD_V3=y CONFIG_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y -CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="cca=3 mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs" diff --git a/arch/mips/configs/workpad_defconfig b/arch/mips/configs/workpad_defconfig index 891a5f77305d..ee712f7b5575 100644 --- a/arch/mips/configs/workpad_defconfig +++ b/arch/mips/configs/workpad_defconfig @@ -61,5 +61,4 @@ CONFIG_TMPFS_POSIX_ACL=y CONFIG_NFS_FS=m CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x170,0x376,49 mem=16M" diff --git a/arch/mips/configs/xway_defconfig b/arch/mips/configs/xway_defconfig index 9abbc0debc2a..ebd8dbdb0695 100644 --- a/arch/mips/configs/xway_defconfig +++ b/arch/mips/configs/xway_defconfig @@ -153,4 +153,3 @@ CONFIG_DEBUG_FS=y CONFIG_MAGIC_SYSRQ=y # CONFIG_SCHED_DEBUG is not set # CONFIG_FTRACE is not set -CONFIG_CMDLINE_BOOL=y diff --git a/arch/mips/kernel/relocate.c b/arch/mips/kernel/relocate.c index 499a5357c09f..13c955027696 100644 --- a/arch/mips/kernel/relocate.c +++ b/arch/mips/kernel/relocate.c @@ -244,15 +244,13 @@ static inline __init unsigned long get_random_boot(void) static inline __init bool kaslr_disabled(void) { char *str; - -#if defined(CONFIG_CMDLINE_BOOL) const char *builtin_cmdline = CONFIG_CMDLINE; str = strstr(builtin_cmdline, "nokaslr"); if (str == builtin_cmdline || (str > builtin_cmdline && *(str - 1) == ' ')) return true; -#endif + str = strstr(arcs_cmdline, "nokaslr"); if (str == arcs_cmdline || (str > arcs_cmdline && *(str - 1) == ' ')) return true; diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index 279be0153f8b..f2270528011b 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -29,6 +29,7 @@ #include <linux/of_fdt.h> #include <linux/dmi.h> #include <linux/crash_dump.h> +#include <linux/cmdline.h> #include <asm/addrspace.h> #include <asm/bootinfo.h> @@ -66,12 +67,6 @@ EXPORT_SYMBOL(mips_machtype); static char __initdata command_line[COMMAND_LINE_SIZE]; char __initdata arcs_cmdline[COMMAND_LINE_SIZE]; -#ifdef CONFIG_CMDLINE_BOOL -static const char builtin_cmdline[] __initconst = CONFIG_CMDLINE; -#else -static const char builtin_cmdline[] __initconst = ""; -#endif - /* * mips_io_port_base is the begin of the address space to which x86 style * I/O ports are mapped. @@ -546,28 +541,6 @@ static void __init bootcmdline_init(void) { bool dt_bootargs = false; - /* - * If CMDLINE_OVERRIDE is enabled then initializing the command line is - * trivial - we simply use the built-in command line unconditionally & - * unmodified. - */ - if (IS_ENABLED(CONFIG_CMDLINE_OVERRIDE)) { - strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE); - return; - } - - /* - * If the user specified a built-in command line & - * MIPS_CMDLINE_BUILTIN_EXTEND, then the built-in command line is - * prepended to arguments from the bootloader or DT so we'll copy them - * to the start of boot_command_line here. Otherwise, empty - * boot_command_line to undo anything early_init_dt_scan_chosen() did. - */ - if (IS_ENABLED(CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND)) - strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE); - else - boot_command_line[0] = 0; - #ifdef CONFIG_OF_EARLY_FLATTREE /* * If we're configured to take boot arguments from DT, look for those @@ -585,16 +558,7 @@ static void __init bootcmdline_init(void) * plat_mem_setup() should have filled arcs_cmdline with arguments from * the bootloader. */ - if (IS_ENABLED(CONFIG_MIPS_CMDLINE_DTB_EXTEND) || !dt_bootargs) - bootcmdline_append(arcs_cmdline, COMMAND_LINE_SIZE); - - /* - * If the user specified a built-in command line & we didn't already - * prepend it, we append it to boot_command_line here. - */ - if (IS_ENABLED(CONFIG_CMDLINE_BOOL) && - !IS_ENABLED(CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND)) - bootcmdline_append(builtin_cmdline, COMMAND_LINE_SIZE); + cmdline_build(boot_command_line, arcs_cmdline); } /* diff --git a/arch/mips/pic32/pic32mzda/early_console.c b/arch/mips/pic32/pic32mzda/early_console.c index 25372e62783b..94d3a5ba5e10 100644 --- a/arch/mips/pic32/pic32mzda/early_console.c +++ b/arch/mips/pic32/pic32mzda/early_console.c @@ -75,7 +75,7 @@ static char * __init pic32_getcmdline(void) * arch_mem_init() has not been called yet, so we don't have a real * command line setup if using CONFIG_CMDLINE_BOOL. */ -#ifdef CONFIG_CMDLINE_OVERRIDE +#ifdef CONFIG_CMDLINE_FORCE return CONFIG_CMDLINE; #else return fw_getcmdline(); diff --git a/arch/mips/pic32/pic32mzda/init.c b/arch/mips/pic32/pic32mzda/init.c index 764f2d022fae..39fdacbbac56 100644 --- a/arch/mips/pic32/pic32mzda/init.c +++ b/arch/mips/pic32/pic32mzda/init.c @@ -40,9 +40,7 @@ void __init plat_mem_setup(void) pr_info("Found following command lines\n"); pr_info(" boot_command_line: %s\n", boot_command_line); pr_info(" arcs_cmdline : %s\n", arcs_cmdline); -#ifdef CONFIG_CMDLINE_BOOL pr_info(" builtin_cmdline : %s\n", CONFIG_CMDLINE); -#endif if (dtb != __dtb_start) strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
This converts the architecture to GENERIC_CMDLINE. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> --- arch/mips/Kconfig | 1 + arch/mips/Kconfig.debug | 44 ----------------------- arch/mips/configs/ar7_defconfig | 1 - arch/mips/configs/bcm47xx_defconfig | 1 - arch/mips/configs/bcm63xx_defconfig | 1 - arch/mips/configs/bmips_be_defconfig | 1 - arch/mips/configs/bmips_stb_defconfig | 1 - arch/mips/configs/capcella_defconfig | 1 - arch/mips/configs/ci20_defconfig | 1 - arch/mips/configs/cu1000-neo_defconfig | 1 - arch/mips/configs/cu1830-neo_defconfig | 1 - arch/mips/configs/e55_defconfig | 1 - arch/mips/configs/generic_defconfig | 1 - arch/mips/configs/gpr_defconfig | 1 - arch/mips/configs/loongson3_defconfig | 1 - arch/mips/configs/mpc30x_defconfig | 1 - arch/mips/configs/rt305x_defconfig | 1 - arch/mips/configs/tb0219_defconfig | 1 - arch/mips/configs/tb0226_defconfig | 1 - arch/mips/configs/tb0287_defconfig | 1 - arch/mips/configs/workpad_defconfig | 1 - arch/mips/configs/xway_defconfig | 1 - arch/mips/kernel/relocate.c | 4 +-- arch/mips/kernel/setup.c | 40 ++------------------- arch/mips/pic32/pic32mzda/early_console.c | 2 +- arch/mips/pic32/pic32mzda/init.c | 2 -- 26 files changed, 5 insertions(+), 108 deletions(-)