diff mbox series

[tty,v1,67/74] serial: sunsab: Use port lock wrappers

Message ID 20230914183831.587273-68-john.ogness@linutronix.de
State New
Headers show
Series serial: wrappers for uart port lock | expand

Commit Message

John Ogness Sept. 14, 2023, 6:38 p.m. UTC 
From: Thomas Gleixner <tglx@linutronix.de>

When a serial port is used for kernel console output, then all
modifications to the UART registers which are done from other contexts,
e.g. getty, termios, are interference points for the kernel console.

So far this has been ignored and the printk output is based on the
principle of hope. The rework of the console infrastructure which aims to
support threaded and atomic consoles, requires to mark sections which
modify the UART registers as unsafe. This allows the atomic write function
to make informed decisions and eventually to restore operational state. It
also allows to prevent the regular UART code from modifying UART registers
while printk output is in progress.

All modifications of UART registers are guarded by the UART port lock,
which provides an obvious synchronization point with the console
infrastructure.

To avoid adding this functionality to all UART drivers, wrap the
spin_[un]lock*() invocations for uart_port::lock into helper functions
which just contain the spin_[un]lock*() invocations for now. In a
subsequent step these helpers will gain the console synchronization
mechanisms.

Converted with coccinelle. No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 drivers/tty/serial/sunsab.c | 34 +++++++++++++++++-----------------
 1 file changed, 17 insertions(+), 17 deletions(-)
diff mbox series

Patch

diff --git a/drivers/tty/serial/sunsab.c b/drivers/tty/serial/sunsab.c
index 40eeaf835bba..6aa51a6f8063 100644
--- a/drivers/tty/serial/sunsab.c
+++ b/drivers/tty/serial/sunsab.c
@@ -310,7 +310,7 @@  static irqreturn_t sunsab_interrupt(int irq, void *dev_id)
 	unsigned long flags;
 	unsigned char gis;
 
-	spin_lock_irqsave(&up->port.lock, flags);
+	uart_port_lock_irqsave(&up->port, &flags);
 
 	status.stat = 0;
 	gis = readb(&up->regs->r.gis) >> up->gis_shift;
@@ -331,7 +331,7 @@  static irqreturn_t sunsab_interrupt(int irq, void *dev_id)
 			transmit_chars(up, &status);
 	}
 
-	spin_unlock_irqrestore(&up->port.lock, flags);
+	uart_port_unlock_irqrestore(&up->port, flags);
 
 	if (port)
 		tty_flip_buffer_push(port);
@@ -473,12 +473,12 @@  static void sunsab_send_xchar(struct uart_port *port, char ch)
 	if (ch == __DISABLED_CHAR)
 		return;
 
-	spin_lock_irqsave(&up->port.lock, flags);
+	uart_port_lock_irqsave(&up->port, &flags);
 
 	sunsab_tec_wait(up);
 	writeb(ch, &up->regs->w.tic);
 
-	spin_unlock_irqrestore(&up->port.lock, flags);
+	uart_port_unlock_irqrestore(&up->port, flags);
 }
 
 /* port->lock held by caller.  */
@@ -499,7 +499,7 @@  static void sunsab_break_ctl(struct uart_port *port, int break_state)
 	unsigned long flags;
 	unsigned char val;
 
-	spin_lock_irqsave(&up->port.lock, flags);
+	uart_port_lock_irqsave(&up->port, &flags);
 
 	val = up->cached_dafo;
 	if (break_state)
@@ -512,7 +512,7 @@  static void sunsab_break_ctl(struct uart_port *port, int break_state)
 	if (test_bit(SAB82532_XPR, &up->irqflags))
 		sunsab_tx_idle(up);
 
-	spin_unlock_irqrestore(&up->port.lock, flags);
+	uart_port_unlock_irqrestore(&up->port, flags);
 }
 
 /* port->lock is not held.  */
@@ -527,7 +527,7 @@  static int sunsab_startup(struct uart_port *port)
 	if (err)
 		return err;
 
-	spin_lock_irqsave(&up->port.lock, flags);
+	uart_port_lock_irqsave(&up->port, &flags);
 
 	/*
 	 * Wait for any commands or immediate characters
@@ -582,7 +582,7 @@  static int sunsab_startup(struct uart_port *port)
 	set_bit(SAB82532_ALLS, &up->irqflags);
 	set_bit(SAB82532_XPR, &up->irqflags);
 
-	spin_unlock_irqrestore(&up->port.lock, flags);
+	uart_port_unlock_irqrestore(&up->port, flags);
 
 	return 0;
 }
@@ -594,7 +594,7 @@  static void sunsab_shutdown(struct uart_port *port)
 		container_of(port, struct uart_sunsab_port, port);
 	unsigned long flags;
 
-	spin_lock_irqsave(&up->port.lock, flags);
+	uart_port_lock_irqsave(&up->port, &flags);
 
 	/* Disable Interrupts */
 	up->interrupt_mask0 = 0xff;
@@ -628,7 +628,7 @@  static void sunsab_shutdown(struct uart_port *port)
 	writeb(tmp, &up->regs->rw.ccr0);
 #endif
 
-	spin_unlock_irqrestore(&up->port.lock, flags);
+	uart_port_unlock_irqrestore(&up->port, flags);
 	free_irq(up->port.irq, up);
 }
 
@@ -779,9 +779,9 @@  static void sunsab_set_termios(struct uart_port *port, struct ktermios *termios,
 	unsigned int baud = uart_get_baud_rate(port, termios, old, 0, 4000000);
 	unsigned int quot = uart_get_divisor(port, baud);
 
-	spin_lock_irqsave(&up->port.lock, flags);
+	uart_port_lock_irqsave(&up->port, &flags);
 	sunsab_convert_to_sab(up, termios->c_cflag, termios->c_iflag, baud, quot);
-	spin_unlock_irqrestore(&up->port.lock, flags);
+	uart_port_unlock_irqrestore(&up->port, flags);
 }
 
 static const char *sunsab_type(struct uart_port *port)
@@ -857,15 +857,15 @@  static void sunsab_console_write(struct console *con, const char *s, unsigned n)
 	int locked = 1;
 
 	if (up->port.sysrq || oops_in_progress)
-		locked = spin_trylock_irqsave(&up->port.lock, flags);
+		locked = uart_port_trylock_irqsave(&up->port, &flags);
 	else
-		spin_lock_irqsave(&up->port.lock, flags);
+		uart_port_lock_irqsave(&up->port, &flags);
 
 	uart_console_write(&up->port, s, n, sunsab_console_putchar);
 	sunsab_tec_wait(up);
 
 	if (locked)
-		spin_unlock_irqrestore(&up->port.lock, flags);
+		uart_port_unlock_irqrestore(&up->port, flags);
 }
 
 static int sunsab_console_setup(struct console *con, char *options)
@@ -914,7 +914,7 @@  static int sunsab_console_setup(struct console *con, char *options)
 	 */
 	sunsab_startup(&up->port);
 
-	spin_lock_irqsave(&up->port.lock, flags);
+	uart_port_lock_irqsave(&up->port, &flags);
 
 	/*
 	 * Finally, enable interrupts
@@ -932,7 +932,7 @@  static int sunsab_console_setup(struct console *con, char *options)
 	sunsab_convert_to_sab(up, con->cflag, 0, baud, quot);
 	sunsab_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS);
 
-	spin_unlock_irqrestore(&up->port.lock, flags);
+	uart_port_unlock_irqrestore(&up->port, flags);
 	
 	return 0;
 }