[v2,1/2] asm-generic: Remove pci.h copying remaining code to x86

The generic pci.h header now only provides a definition of
pci_get_legacy_ide_irq which is used by architectures that support PNP.
Of the architectures that use asm-generic/pci.h this is only x86.

This patch removes the old pci.h in order to make room for a new
pci.h to be used by arm64, riscv, openrisc, etc.

The existing code in pci.h is moved out to x86.  On other architectures
we clean up any outstanding references.

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/lkml/CAK8P3a0JmPeczfmMBE__vn=Jbvf=nkbpVaZCycyv40pZNCJJXQ@mail.gmail.com/
Signed-off-by: Stafford Horne <shorne@gmail.com>
---
 arch/alpha/include/asm/pci.h   |  1 -
 arch/ia64/include/asm/pci.h    |  1 -
 arch/m68k/include/asm/pci.h    |  7 +++++--
 arch/powerpc/include/asm/pci.h |  1 -
 arch/s390/include/asm/pci.h    |  1 -
 arch/sparc/include/asm/pci.h   |  9 ---------
 arch/x86/include/asm/pci.h     |  6 ++++--
 arch/xtensa/include/asm/pci.h  |  3 ---
 include/asm-generic/pci.h      | 17 -----------------
 9 files changed, 9 insertions(+), 37 deletions(-)
 delete mode 100644 include/asm-generic/pci.h

Hi Stafford,

On Sun, Jul 17, 2022 at 5:35 AM Stafford Horne <shorne@gmail.com> wrote:
> The generic pci.h header now only provides a definition of
> pci_get_legacy_ide_irq which is used by architectures that support PNP.
> Of the architectures that use asm-generic/pci.h this is only x86.
>
> This patch removes the old pci.h in order to make room for a new
> pci.h to be used by arm64, riscv, openrisc, etc.
>
> The existing code in pci.h is moved out to x86.  On other architectures
> we clean up any outstanding references.
>
> Suggested-by: Arnd Bergmann <arnd@arndb.de>
> Link: https://lore.kernel.org/lkml/CAK8P3a0JmPeczfmMBE__vn=Jbvf=nkbpVaZCycyv40pZNCJJXQ@mail.gmail.com/
> Signed-off-by: Stafford Horne <shorne@gmail.com>

Thanks for your patch!

> --- a/arch/m68k/include/asm/pci.h
> +++ b/arch/m68k/include/asm/pci.h
> @@ -2,11 +2,14 @@
>  #ifndef _ASM_M68K_PCI_H
>  #define _ASM_M68K_PCI_H
>
> -#include <asm-generic/pci.h>
> -
>  #define        pcibios_assign_all_busses()     1
>
>  #define        PCIBIOS_MIN_IO          0x00000100
>  #define        PCIBIOS_MIN_MEM         0x02000000
>
> +static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
> +{
> +       return channel ? 15 : 14;
> +}
> +

I thought you were not going to add this?

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

On Sun, Jul 17, 2022 at 12:34:52PM +0900, Stafford Horne wrote:
> The generic pci.h header now only provides a definition of
> pci_get_legacy_ide_irq which is used by architectures that support PNP.
> Of the architectures that use asm-generic/pci.h this is only x86.

Please move this into a separate header, ike legacy-ide.h.  It doens't
have anyting to do with actual PCI support.

On Mon, Jul 18, 2022 at 6:33 AM Christoph Hellwig <hch@infradead.org> wrote:
>
> On Sun, Jul 17, 2022 at 12:34:52PM +0900, Stafford Horne wrote:
> > The generic pci.h header now only provides a definition of
> > pci_get_legacy_ide_irq which is used by architectures that support PNP.
> > Of the architectures that use asm-generic/pci.h this is only x86.
>
> Please move this into a separate header, ike legacy-ide.h.  It doens't
> have anyting to do with actual PCI support.

It looks like asm/libata-portmap.h is meant to have this information already,
and this is what libata uses, while drivers/ide used the
pci_get_legacy_ide_irq()
function for the same purpose.

Only ia64 and powerpc have interesting definitions of both, and they
return the same thing, so I think this is sufficient to remove the last caller:

diff --git a/drivers/pnp/resource.c b/drivers/pnp/resource.c
index 2fa0f7d55259..d7a6250589d6 100644
--- a/drivers/pnp/resource.c
+++ b/drivers/pnp/resource.c
@@ -16,7 +16,7 @@
 #include <asm/io.h>
 #include <asm/dma.h>
 #include <asm/irq.h>
-#include <linux/pci.h>
+#include <linux/libata.h>
 #include <linux/ioport.h>
 #include <linux/init.h>

@@ -322,8 +322,8 @@ static int pci_dev_uses_irq(struct pnp_dev *pnp,
struct pci_dev *pci,
                 * treat the compatibility IRQs as busy.
                 */
                if ((progif & 0x5) != 0x5)
-                       if (pci_get_legacy_ide_irq(pci, 0) == irq ||
-                           pci_get_legacy_ide_irq(pci, 1) == irq) {
+                       if (ATA_PRIMARY_IRQ(pci) == irq ||
+                           ATA_SECONDARY_IRQ(pci) == irq) {
                                pnp_dbg(&pnp->dev, "  legacy IDE device %s "
                                        "using irq %d\n", pci_name(pci), irq);
                                return 1;

This is fine on the architectures that currently return an error from
pci_get_legacy_ide_irq() but will change to returning 15/14 instead,
because they do not support ISA devices, so pci_dev_uses_irq()
will never be called either.

        Arnd

On Mon, Jul 18, 2022 at 10:40:34AM +0200, Arnd Bergmann wrote:
> On Mon, Jul 18, 2022 at 6:33 AM Christoph Hellwig <hch@infradead.org> wrote:
> >
> > On Sun, Jul 17, 2022 at 12:34:52PM +0900, Stafford Horne wrote:
> > > The generic pci.h header now only provides a definition of
> > > pci_get_legacy_ide_irq which is used by architectures that support PNP.
> > > Of the architectures that use asm-generic/pci.h this is only x86.
> >
> > Please move this into a separate header, ike legacy-ide.h.  It doens't
> > have anyting to do with actual PCI support.
> 
> It looks like asm/libata-portmap.h is meant to have this information already,
> and this is what libata uses, while drivers/ide used the
> pci_get_legacy_ide_irq()
> function for the same purpose.
> 
> Only ia64 and powerpc have interesting definitions of both, and they
> return the same thing, so I think this is sufficient to remove the last caller:
> 
> diff --git a/drivers/pnp/resource.c b/drivers/pnp/resource.c
> index 2fa0f7d55259..d7a6250589d6 100644
> --- a/drivers/pnp/resource.c
> +++ b/drivers/pnp/resource.c
> @@ -16,7 +16,7 @@
>  #include <asm/io.h>
>  #include <asm/dma.h>
>  #include <asm/irq.h>
> -#include <linux/pci.h>
> +#include <linux/libata.h>
>  #include <linux/ioport.h>
>  #include <linux/init.h>
> 
> @@ -322,8 +322,8 @@ static int pci_dev_uses_irq(struct pnp_dev *pnp,
> struct pci_dev *pci,
>                  * treat the compatibility IRQs as busy.
>                  */
>                 if ((progif & 0x5) != 0x5)
> -                       if (pci_get_legacy_ide_irq(pci, 0) == irq ||
> -                           pci_get_legacy_ide_irq(pci, 1) == irq) {
> +                       if (ATA_PRIMARY_IRQ(pci) == irq ||
> +                           ATA_SECONDARY_IRQ(pci) == irq) {
>                                 pnp_dbg(&pnp->dev, "  legacy IDE device %s "
>                                         "using irq %d\n", pci_name(pci), irq);
>                                 return 1;
> 
> This is fine on the architectures that currently return an error from
> pci_get_legacy_ide_irq() but will change to returning 15/14 instead,
> because they do not support ISA devices, so pci_dev_uses_irq()
> will never be called either.

I like this, I didn't know about the ATA_PRIMARY_IRQ/ATA_SECONDARY_IRQ macro.
Let me add this to the series before 1/2.  I will keep you as the author via
Signed-off-by annotation.

-Stafford