diff mbox series

[v2,3/6] sh: prefer memblock APIs returning virtual address

Message ID 1543852035-26634-4-git-send-email-rppt@linux.ibm.com
State Not Applicable
Delegated to: David Miller
Headers show
Series memblock: simplify several early memory allocation | expand

Commit Message

Mike Rapoport Dec. 3, 2018, 3:47 p.m. UTC
Rather than use the memblock_alloc_base that returns a physical address and
then convert this address to the virtual one, use appropriate memblock
function that returns a virtual address.

There is a small functional change in the allocation of then NODE_DATA().
Instead of panicing if the local allocation failed, the non-local
allocation attempt will be made.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
---
 arch/sh/mm/init.c | 18 +++++-------------
 arch/sh/mm/numa.c |  5 ++---
 2 files changed, 7 insertions(+), 16 deletions(-)

Comments

Sam Ravnborg Dec. 3, 2018, 4:10 p.m. UTC | #1
Hi Mike.

On Mon, Dec 03, 2018 at 05:47:12PM +0200, Mike Rapoport wrote:
> Rather than use the memblock_alloc_base that returns a physical address and
> then convert this address to the virtual one, use appropriate memblock
> function that returns a virtual address.
> 
> There is a small functional change in the allocation of then NODE_DATA().
> Instead of panicing if the local allocation failed, the non-local
> allocation attempt will be made.
> 
> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
> ---
>  arch/sh/mm/init.c | 18 +++++-------------
>  arch/sh/mm/numa.c |  5 ++---
>  2 files changed, 7 insertions(+), 16 deletions(-)
> 
> diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
> index c8c13c77..3576b5f 100644
> --- a/arch/sh/mm/init.c
> +++ b/arch/sh/mm/init.c
> @@ -192,24 +192,16 @@ void __init page_table_range_init(unsigned long start, unsigned long end,
>  void __init allocate_pgdat(unsigned int nid)
>  {
>  	unsigned long start_pfn, end_pfn;
> -#ifdef CONFIG_NEED_MULTIPLE_NODES
> -	unsigned long phys;
> -#endif
>  
>  	get_pfn_range_for_nid(nid, &start_pfn, &end_pfn);
>  
>  #ifdef CONFIG_NEED_MULTIPLE_NODES
> -	phys = __memblock_alloc_base(sizeof(struct pglist_data),
> -				SMP_CACHE_BYTES, end_pfn << PAGE_SHIFT);
> -	/* Retry with all of system memory */
> -	if (!phys)
> -		phys = __memblock_alloc_base(sizeof(struct pglist_data),
> -					SMP_CACHE_BYTES, memblock_end_of_DRAM());
> -	if (!phys)
> +	NODE_DATA(nid) = memblock_alloc_try_nid_nopanic(
> +				sizeof(struct pglist_data),
> +				SMP_CACHE_BYTES, MEMBLOCK_LOW_LIMIT,
> +				MEMBLOCK_ALLOC_ACCESSIBLE, nid);
> +	if (!NODE_DATA(nid))
>  		panic("Can't allocate pgdat for node %d\n", nid);
> -
> -	NODE_DATA(nid) = __va(phys);
> -	memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
The new code will always assign NODE_DATA(nid), where the old
code only assigned NODE_DATA(nid) in the good case.
I dunno if this is an issue, just noticed the difference and
wanted to point it out.

	Sam
Mike Rapoport Dec. 3, 2018, 4:28 p.m. UTC | #2
On Mon, Dec 03, 2018 at 05:10:52PM +0100, Sam Ravnborg wrote:
> Hi Mike.
> 
> On Mon, Dec 03, 2018 at 05:47:12PM +0200, Mike Rapoport wrote:
> > Rather than use the memblock_alloc_base that returns a physical address and
> > then convert this address to the virtual one, use appropriate memblock
> > function that returns a virtual address.
> > 
> > There is a small functional change in the allocation of then NODE_DATA().
> > Instead of panicing if the local allocation failed, the non-local
> > allocation attempt will be made.
> > 
> > Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
> > ---
> >  arch/sh/mm/init.c | 18 +++++-------------
> >  arch/sh/mm/numa.c |  5 ++---
> >  2 files changed, 7 insertions(+), 16 deletions(-)
> > 
> > diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
> > index c8c13c77..3576b5f 100644
> > --- a/arch/sh/mm/init.c
> > +++ b/arch/sh/mm/init.c
> > @@ -192,24 +192,16 @@ void __init page_table_range_init(unsigned long start, unsigned long end,
> >  void __init allocate_pgdat(unsigned int nid)
> >  {
> >  	unsigned long start_pfn, end_pfn;
> > -#ifdef CONFIG_NEED_MULTIPLE_NODES
> > -	unsigned long phys;
> > -#endif
> >  
> >  	get_pfn_range_for_nid(nid, &start_pfn, &end_pfn);
> >  
> >  #ifdef CONFIG_NEED_MULTIPLE_NODES
> > -	phys = __memblock_alloc_base(sizeof(struct pglist_data),
> > -				SMP_CACHE_BYTES, end_pfn << PAGE_SHIFT);
> > -	/* Retry with all of system memory */
> > -	if (!phys)
> > -		phys = __memblock_alloc_base(sizeof(struct pglist_data),
> > -					SMP_CACHE_BYTES, memblock_end_of_DRAM());
> > -	if (!phys)
> > +	NODE_DATA(nid) = memblock_alloc_try_nid_nopanic(
> > +				sizeof(struct pglist_data),
> > +				SMP_CACHE_BYTES, MEMBLOCK_LOW_LIMIT,
> > +				MEMBLOCK_ALLOC_ACCESSIBLE, nid);
> > +	if (!NODE_DATA(nid))
> >  		panic("Can't allocate pgdat for node %d\n", nid);
> > -
> > -	NODE_DATA(nid) = __va(phys);
> > -	memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
> The new code will always assign NODE_DATA(nid), where the old
> code only assigned NODE_DATA(nid) in the good case.
> I dunno if this is an issue, just noticed the difference and
> wanted to point it out.

If the allocation fails the NODE_DATA(nid) remains zero anyway and there is
a panic() call. So I think there is no actual functional change here.

> 	Sam
>
diff mbox series

Patch

diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index c8c13c77..3576b5f 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -192,24 +192,16 @@  void __init page_table_range_init(unsigned long start, unsigned long end,
 void __init allocate_pgdat(unsigned int nid)
 {
 	unsigned long start_pfn, end_pfn;
-#ifdef CONFIG_NEED_MULTIPLE_NODES
-	unsigned long phys;
-#endif
 
 	get_pfn_range_for_nid(nid, &start_pfn, &end_pfn);
 
 #ifdef CONFIG_NEED_MULTIPLE_NODES
-	phys = __memblock_alloc_base(sizeof(struct pglist_data),
-				SMP_CACHE_BYTES, end_pfn << PAGE_SHIFT);
-	/* Retry with all of system memory */
-	if (!phys)
-		phys = __memblock_alloc_base(sizeof(struct pglist_data),
-					SMP_CACHE_BYTES, memblock_end_of_DRAM());
-	if (!phys)
+	NODE_DATA(nid) = memblock_alloc_try_nid_nopanic(
+				sizeof(struct pglist_data),
+				SMP_CACHE_BYTES, MEMBLOCK_LOW_LIMIT,
+				MEMBLOCK_ALLOC_ACCESSIBLE, nid);
+	if (!NODE_DATA(nid))
 		panic("Can't allocate pgdat for node %d\n", nid);
-
-	NODE_DATA(nid) = __va(phys);
-	memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
 #endif
 
 	NODE_DATA(nid)->node_start_pfn = start_pfn;
diff --git a/arch/sh/mm/numa.c b/arch/sh/mm/numa.c
index 830e8b3..c4bde61 100644
--- a/arch/sh/mm/numa.c
+++ b/arch/sh/mm/numa.c
@@ -41,9 +41,8 @@  void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end)
 	__add_active_range(nid, start_pfn, end_pfn);
 
 	/* Node-local pgdat */
-	NODE_DATA(nid) = __va(memblock_alloc_base(sizeof(struct pglist_data),
-					     SMP_CACHE_BYTES, end));
-	memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
+	NODE_DATA(nid) = memblock_alloc_node(sizeof(struct pglist_data),
+					     SMP_CACHE_BYTES, nid);
 
 	NODE_DATA(nid)->node_start_pfn = start_pfn;
 	NODE_DATA(nid)->node_spanned_pages = end_pfn - start_pfn;