Show patches with: State = Action Required       |    Archived = No       |   163 patches
« 1 2 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
Bundle opal-prd.h from the kernel sources - - - - --- 2015-09-10 Mathieu Trudel-Lapierre New
[V2] hw/bt.c: Retry sending ipmi message in bt with correct data - - - - --- 2016-02-29 Mamatha Inamdar New
[v2] xscom: Trace XSCOMs that take more than 10us - - - - --- 2016-09-08 Stewart Smith New
[5/5] fsi-master: On XSCOM errors, try to reset the PIB2OPB bridge - - - - --- 2016-09-13 Benjamin Herrenschmidt New
opal/errorlog : Fixes the problem of different create date/time for same error log - - - - --- 2016-09-14 Mukesh Ojha New
[V8,1/9] errorlog: Generalize the error log write path to host - - 1 - --- 2016-11-15 Mukesh Ojha New
[V8,2/9] errorlog: Give function 'fsp_elog_write_set_head_state' a more meaningful name - - 1 - --- 2016-11-15 Mukesh Ojha New
[V8,3/9] errorlog: Generalize the error log read path - - 1 - --- 2016-11-15 Mukesh Ojha New
[V8,4/9] errorlog: Rename 'fsp_log_state' to 'sp_log_state' - - 1 - --- 2016-11-15 Mukesh Ojha New
[V8,5/9] errorlog: Introduce get and put elog routine and reference count field in elog structure - - - - --- 2016-11-15 Mukesh Ojha New
[V8,6/9] errorlog: Replace elog_init() with opal_elog_init() for QEMU platform - - 1 - --- 2016-11-15 Mukesh Ojha New
[V8,7/9] errorlog: Remove the usage of 'elog_init()' routine, replaces it with 'opal_elog_init()' f… - - 1 - --- 2016-11-15 Mukesh Ojha New
[V8,8/9] errorlog: Enable error log write to host on BMC systems - - 1 - --- 2016-11-15 Mukesh Ojha New
[V8,9/9] errorlog: Add generic elog write interface - - 1 - --- 2016-11-15 Mukesh Ojha New
[RFC/PATCH] affinity: Use fabric node ID on most systems - - - - --- 2017-04-04 Benjamin Herrenschmidt New
[1/2] blocklevel_info: Refactor the passing of output data - - - - --- 2017-04-07 William A. Kennington III New
[2/2] flash: Add dt entries for flash that doesn't need erase - - - - --- 2017-04-07 William A. Kennington III New
[01/10] hw/fsp: Decode payload initrd on FSP machines - - - - --- 2017-06-09 Matt Brown New
[02/10] platforms: Add load_done function to firenze - - - - --- 2017-06-09 Matt Brown New
[03/10] core/device: Allow for large DT props - - - - --- 2017-06-09 Matt Brown New
[04/10] core: Add generic XZ decoding function - - - - --- 2017-06-09 Matt Brown New
[05/10] core: Decode payload initrd on openpower - - - - --- 2017-06-09 Matt Brown New
[06/10] platform: Add load_done to Firestone platform - - - - --- 2017-06-09 Matt Brown New
[07/10] platform: Add load_done to Garrison platform - - - - --- 2017-06-09 Matt Brown New
[08/10] platform: Add load_done to Habanero platform - - - - --- 2017-06-09 Matt Brown New
[09/10] platform: Add load_done to Palmetto platform - - - - --- 2017-06-09 Matt Brown New
[10/10] platform: Add load_done to Mambo platform - - - - --- 2017-06-09 Matt Brown New
[RFC] pflash: support exporting layout as CSV for ffspart - - - - --- 2017-08-17 Stewart Smith New
[1/3] core/pci: Add for_each_pci_dev() - - 1 - --- 2017-08-22 Oliver O'Halloran New
[2/3] npu: Rework finding the paired PCI devices - - - - --- 2017-08-22 Oliver O'Halloran New
[3/3] pci-virt: Add generic slot and cfg functions - - - - --- 2017-08-22 Oliver O'Halloran New
blocklevel_info: Refactor the passing of output data blocklevel_info: Refactor the passing of output data - - - - --- 2017-08-29 William A. Kennington III New
hdata: Fix /vpd dtc warnings hdata: Fix /vpd dtc warnings - - - - --- 2017-09-08 Oliver O'Halloran New
mambo: disable OPAL_SIGNAL_SYSTEM_RESET mambo: disable OPAL_SIGNAL_SYSTEM_RESET - - - - --- 2017-10-17 Nicholas Piggin New
[2/2] core/hmi: Do not call find_core_checkstop_reason() unconditionally [1/2] hw/npu2: Implement logging HMI actions - - - - --- 2017-11-30 Balbir Singh New
Skiboot patch for using opal_cec_reboot before OPAL_BOOT_COMPLETE Skiboot patch for using opal_cec_reboot before OPAL_BOOT_COMPLETE - - - - --- 2017-12-04 Meng Ze Liao New
[RFC] pflash: Print libflash error strings [RFC] pflash: Print libflash error strings - - - - --- 2018-02-27 Oliver O'Halloran New
[7/9] p9_stop_api: Only update SCOM restore entry if there is an entry Coverity fixes - 1 - - --- 2018-03-19 Cyril Bur New
[9/9,RFC] dts: Possible FIX for set trip bits Coverity fixes - - - - --- 2018-03-19 Cyril Bur New
[v2] mambo/mambo_utils.tcl: Inject an MCE at a specified address [v2] mambo/mambo_utils.tcl: Inject an MCE at a specified address - - - - --- 2018-04-11 Balbir Singh New
[2/2] timer: Reschedule timer if OPAL receives early timer interrupt [1/2] timer: Move update_timer_expiry call to separate function - - - - --- 2018-05-03 Vasant Hegde New
[4/6] p9/stop_api: Remove unnecessary stores scan build fixes - - - - --- 2018-05-17 Balbir Singh New
[v3,1/3] core: Implement generic dump region opal call BMC dumping - - - - --- 2018-05-31 Joel Stanley New
[v3,2/3] debug_descriptor: Claim reserved field for host kernel log buffer BMC dumping - - - - --- 2018-05-31 Joel Stanley New
[v3,3/3] dump: Always store kernel log buffer location BMC dumping - - - - --- 2018-05-31 Joel Stanley New
[v2] SLW: Provide cpuidle state description in device tree [v2] SLW: Provide cpuidle state description in device tree - - - - --- 2018-06-04 Abhishek Goel New
trival: Remove an extra reg read of VUART1_GCTRLA trival: Remove an extra reg read of VUART1_GCTRLA - - - - --- 2018-06-07 Balbir Singh New
opal/hmi: Wakeup the cpu before reading core_fir opal/hmi: Wakeup the cpu before reading core_fir - - - - 2-- 2018-08-20 Vaibhav Jain New
core/cpu: Initialize all cpu thread areas to avoid invalid memory access. core/cpu: Initialize all cpu thread areas to avoid invalid memory access. - - 1 - 2-- 2018-09-01 Mahesh J Salgaonkar New
[RFC,1/3] capp: Add ability to fetch CAPP attribute override values from nvram phb4/capp: Provide user tunable for STQ/DMA engine allocation - - - - 1-- 2018-09-09 Vaibhav Jain New
[RFC,2/3] phb4/capp: Introduce 'stq-buffers' capp attribute override phb4/capp: Provide user tunable for STQ/DMA engine allocation - - - - --1 2018-09-09 Vaibhav Jain New
[RFC,3/3] phb4/capp: Introduce 'dma-engines' capp attribute override phb4/capp: Provide user tunable for STQ/DMA engine allocation - - - - --1 2018-09-09 Vaibhav Jain New
[1/2] hdata/i2c: Skip unknown device type [1/2] hdata/i2c: Skip unknown device type - - - - 1-- 2018-09-21 Vasant Hegde New
[2/2] hdata/i2c: Add status property to I2C devices [1/2] hdata/i2c: Skip unknown device type - - - - 2-- 2018-09-21 Vasant Hegde New
phb4_creset: Skip the freset presence detect check phb4_creset: Skip the freset presence detect check - - - - 2-- 2018-11-07 Oliver O'Halloran New
Add opal_msg_type OPAL_MSG_HOTPLUG Add opal_msg_type OPAL_MSG_HOTPLUG - - - - 2-- 2019-01-17 Lei YU Under Review
Implement OPAL_SET_SLOT_LED_STATUS opal call Implement OPAL_SET_SLOT_LED_STATUS opal call - - - - 2-- 2019-01-18 Lei YU Under Review
[RFC] direct-controls: Use P8 sequence from workbook [RFC] direct-controls: Use P8 sequence from workbook - - - - 3-- 2019-03-12 Stewart Smith New
[RFC] pci: Change bus number assignment policy [RFC] pci: Change bus number assignment policy - - - - 2-1 2019-03-12 Oliver O'Halloran New
core/interrupts: Clean up OPAL ICS node core/interrupts: Clean up OPAL ICS node - - - - 2-1 2019-04-23 Oliver O'Halloran Under Review
occ: sensors: Add sensors to IMC framework occ: sensors: Add sensors to IMC framework - - - - 2-1 2019-05-30 Shilpasri G Bhat New
Make .lid and .lid.xz make targets patterns Make .lid and .lid.xz make targets patterns - - - - 3-- 2019-07-15 Stewart Smith New
Makefile: Use implict rules for .xz and .stb Makefile: Use implict rules for .xz and .stb - - 1 - 3-- 2019-07-17 Oliver O'Halloran New
docs: add boot coverage report docs: add boot coverage report - - - - 3-- 2019-07-22 Stewart Smith New
[v2] core/opal: Fix reg format for flash@0 node in DT [v2] core/opal: Fix reg format for flash@0 node in DT - - - - 3-- 2019-10-22 Maxim Polyakov New
[RESEND,v3,1/5] core/pci: Add functions to find accessible devices by bdfn core/pci: Track changes of topology by an OS - - - - 3-- 2019-10-24 Sergei Miroshnichenko New
[RESEND,v3,2/5] core/pci: Make the pci_scan_one() function public core/pci: Track changes of topology by an OS - - - - 3-- 2019-10-24 Sergei Miroshnichenko New
[RESEND,v3,3/5] core/pci: Create the struct pci_device nodes automatically core/pci: Track changes of topology by an OS - - - - 3-- 2019-10-24 Sergei Miroshnichenko New
[RESEND,v3,4/5] core/pci: Hook up the writes to PRIMARY/SECONDARY/SUBORDINATE_BUS registers core/pci: Track changes of topology by an OS - - - - 3-- 2019-10-24 Sergei Miroshnichenko New
[RESEND,v3,5/5] core/pci: Indicate support for PCI re-enumeration core/pci: Track changes of topology by an OS - - - - 3-- 2019-10-24 Sergei Miroshnichenko New
[RFC,v2,1/3] core/pci: Add functions for iterating PCI devices Changes to restoring buses after PCI reset - - - - 3-- 2019-10-29 Jordan Niethe New
[RFC,v2,2/3] core/pcie-slot: Extend slot state machine to restore bus numbers Changes to restoring buses after PCI reset - - - - 3-- 2019-10-29 Jordan Niethe New
[RFC,v2,3/3] core/pcie-slot: Restore slot power controller state Changes to restoring buses after PCI reset - - - - 3-- 2019-10-29 Jordan Niethe New
[RFC] skiboot machine check handler [RFC] skiboot machine check handler - - - - --1 2019-12-11 Nicholas Piggin New
[RFC] OPAL v4 cpu idle driver skeleton [RFC] OPAL v4 cpu idle driver skeleton - - - - --1 2019-12-12 Nicholas Piggin New
core/init: Fix loading BE elfs with no sections core/init: Fix loading BE elfs with no sections - - - - 3-- 2019-12-15 Jordan Niethe New
core/init: Check BE elf version before assuming behaviour core/init: Check BE elf version before assuming behaviour - - - - 3-- 2019-12-16 Jordan Niethe New
[v3,01/13] core/flash: Allow OPAL flash calls for size equal to flash ipmi-hiomap: Enablement for Async opal_flash_op's 1 - 1 - 3-- 2020-01-06 Deb McLemore New
[v3,02/13] core/flash: Make flash_reserve() and flash_release() use any flash ipmi-hiomap: Enablement for Async opal_flash_op's - - 1 - 3-- 2020-01-06 Deb McLemore New
[v3,03/13] core/flash: Don't hold flash_lock for the entirety of an opal_flash_op() ipmi-hiomap: Enablement for Async opal_flash_op's - - 1 - 3-- 2020-01-06 Deb McLemore New
[v3,04/13] core/flash: Make opal_flash_op() actually asynchronous ipmi-hiomap: Enablement for Async opal_flash_op's - - - - 3-- 2020-01-06 Deb McLemore New
[v3,05/13] qemu: 1ms heartbeat time ipmi-hiomap: Enablement for Async opal_flash_op's - - - - --1 2020-01-06 Deb McLemore New
[v3,06/13] hiomap: Enable Async IPMI messaging ipmi-hiomap: Enablement for Async opal_flash_op's - - - - --1 2020-01-06 Deb McLemore New
[v3,07/13] lpc: Fix lpc probe irqmask handling ipmi-hiomap: Enablement for Async opal_flash_op's - - - - --1 2020-01-06 Deb McLemore New
[v3,08/13] hw/bt: Add some more queue debug ipmi-hiomap: Enablement for Async opal_flash_op's - - - - --1 2020-01-06 Deb McLemore New
[v3,09/13] core/flash: Update some logging ipmi-hiomap: Enablement for Async opal_flash_op's - - - - --1 2020-01-06 Deb McLemore New
[v3,10/13] libflash/ipmi-hiomap: Add some debug logging ipmi-hiomap: Enablement for Async opal_flash_op's - - - - --1 2020-01-06 Deb McLemore New
[v3,11/13] lpc: Add logging for hardware diagnostics ipmi-hiomap: Enablement for Async opal_flash_op's - - - - --1 2020-01-06 Deb McLemore New
[v3,12/13] hw/bt: Allow ipmi regular intervals ipmi-hiomap: Enablement for Async opal_flash_op's - - - - --1 2020-01-06 Deb McLemore New
[v3,13/13] libflash/ipmi-hiomap: Add helpers for logging ipmi-hiomap: Enablement for Async opal_flash_op's - - - - --1 2020-01-06 Deb McLemore New
[RFC] Support stop state version quirk and firmware enabled stop [RFC] Support stop state version quirk and firmware enabled stop - - - - 3-- 2020-03-04 Pratik Sampat New
[1/3] SBE: Factor out handling of SBE reset Ultravisor SBE chipops - - - - 3-- 2020-03-28 Thiago Jung Bauermann New
[2/3] SBE: Use the Ultravisor to interact with the SBE Ultravisor SBE chipops - - - - --1 2020-03-28 Thiago Jung Bauermann New
[3/3] doc/opal-uv-abi.rst: Add information about SBE commands Ultravisor SBE chipops - - - - --1 2020-03-28 Thiago Jung Bauermann New
[RFC] hw/phb4: Add fake scom to allow reading PHB registers / IODA tables [RFC] hw/phb4: Add fake scom to allow reading PHB registers / IODA tables - - - - 1-2 2020-04-02 Oliver O'Halloran New
[RFC] opal : Support for pre-entry and post-exit of stop state in opal [RFC] opal : Support for pre-entry and post-exit of stop state in opal - - - - 3-- 2020-04-03 Abhishek Goel New
[v8,1/3] Self Save: Introducing Support for SPR Self Save Support for Self Save API in OPAL - - 9 12 3-- 2020-04-23 Pratik Sampat New
[v8,2/3] API to verify the STOP API and image compatibility Support for Self Save API in OPAL - - 5 5 2-1 2020-04-23 Pratik Sampat New
[v8,3/3] Self save API integration Support for Self Save API in OPAL - - 2 - 3-- 2020-04-23 Pratik Sampat New
[RFC,1/2] opal : Support for pre-entry and post-exit of stop state in opal [RFC,1/2] opal : Support for pre-entry and post-exit of stop state in opal - - - - 3-- 2020-04-27 Abhishek Goel New
« 1 2 »