diff mbox

[V3,5/7] rtc: rv3029: fix alarm support

Message ID 7ae6fa71518f6df8eec00a5784b437a80436d0c1.1462268107.git.mylene.josserand@free-electrons.com
State Accepted
Headers show

Commit Message

Mylene Josserand May 3, 2016, 9:54 a.m. UTC 
The RTC RV3029 handles different types of alarms : seconds, minutes, ...
These alarms can be enabled or disabled individually using an AE_x bit
which is the last bit (BIT(7)) on each alarm registers.

To prepare the alarm IRQ support, the current code enables all the alarm
types by setting each AE_x to 1.
It also fixes others alarms issues :
   - month and weekday errors : it was performing -1 instead of +1.
   - wrong use of bit mask with bin2bcd

Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
---
 drivers/rtc/rtc-rv3029c2.c | 23 ++++++++++++++++-------
 1 file changed, 16 insertions(+), 7 deletions(-)
diff mbox

Patch

diff --git a/drivers/rtc/rtc-rv3029c2.c b/drivers/rtc/rtc-rv3029c2.c
index cf8d465..88a0c18 100644
--- a/drivers/rtc/rtc-rv3029c2.c
+++ b/drivers/rtc/rtc-rv3029c2.c
@@ -76,6 +76,7 @@ 
 #define RV3029_A_DW			0x14
 #define RV3029_A_MO			0x15
 #define RV3029_A_YR			0x16
+#define RV3029_A_AE_X			BIT(7)
 #define RV3029_ALARM_SECTION_LEN	0x07
 
 /* timer section */
@@ -436,14 +437,22 @@  static int rv3029_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 		dev_err(dev, "%s: reading SR failed\n", __func__);
 		return -EIO;
 	}
-	regs[RV3029_A_SC - RV3029_A_SC] = bin2bcd(tm->tm_sec & 0x7f);
-	regs[RV3029_A_MN - RV3029_A_SC] = bin2bcd(tm->tm_min & 0x7f);
-	regs[RV3029_A_HR - RV3029_A_SC] = bin2bcd(tm->tm_hour & 0x3f);
-	regs[RV3029_A_DT - RV3029_A_SC] = bin2bcd(tm->tm_mday & 0x3f);
-	regs[RV3029_A_MO - RV3029_A_SC] = bin2bcd((tm->tm_mon & 0x1f) - 1);
-	regs[RV3029_A_DW - RV3029_A_SC] = bin2bcd((tm->tm_wday & 7) - 1);
-	regs[RV3029_A_YR - RV3029_A_SC] = bin2bcd((tm->tm_year & 0x7f) - 100);
 
+	/* Activate all the alarms with AE_x bit */
+	regs[RV3029_A_SC - RV3029_A_SC] = bin2bcd(tm->tm_sec) | RV3029_A_AE_X;
+	regs[RV3029_A_MN - RV3029_A_SC] = bin2bcd(tm->tm_min) | RV3029_A_AE_X;
+	regs[RV3029_A_HR - RV3029_A_SC] = (bin2bcd(tm->tm_hour) & 0x3f)
+		| RV3029_A_AE_X;
+	regs[RV3029_A_DT - RV3029_A_SC] = (bin2bcd(tm->tm_mday) & 0x3f)
+		| RV3029_A_AE_X;
+	regs[RV3029_A_MO - RV3029_A_SC] = (bin2bcd(tm->tm_mon + 1) & 0x1f)
+		| RV3029_A_AE_X;
+	regs[RV3029_A_DW - RV3029_A_SC] = (bin2bcd(tm->tm_wday + 1) & 0x7)
+		| RV3029_A_AE_X;
+	regs[RV3029_A_YR - RV3029_A_SC] = (bin2bcd(tm->tm_year - 100))
+		| RV3029_A_AE_X;
+
+	/* Write the alarm */
 	ret = rv3029_write_regs(dev, RV3029_A_SC, regs,
 				RV3029_ALARM_SECTION_LEN);
 	if (ret < 0)