diff mbox series

[v3,3/3] rtc: da9063: Use dev_err_probe()

Message ID 20240105145344.204453-4-biju.das.jz@bp.renesas.com
State Accepted
Headers show
Series Make IRQ as optional | expand

Commit Message

Biju Das Jan. 5, 2024, 2:53 p.m. UTC
Replace dev_err()->dev_err_probe() to simpilfy probe().

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v2->v3:
 * No change.
v1->v2:
 * Added Rb tag from Geert.
 * Restored dev_err() for devm_request_threaded_irq() as an RTC can wake
   up a system without an IRQ.
---
 drivers/rtc/rtc-da9063.c | 42 ++++++++++++++++------------------------
 1 file changed, 17 insertions(+), 25 deletions(-)
diff mbox series

Patch

diff --git a/drivers/rtc/rtc-da9063.c b/drivers/rtc/rtc-da9063.c
index 265abdd7e935..859397541f29 100644
--- a/drivers/rtc/rtc-da9063.c
+++ b/drivers/rtc/rtc-da9063.c
@@ -407,57 +407,49 @@  static int da9063_rtc_probe(struct platform_device *pdev)
 				 config->rtc_enable_reg,
 				 config->rtc_enable_mask,
 				 config->rtc_enable_mask);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Failed to enable RTC\n");
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(&pdev->dev, ret, "Failed to enable RTC\n");
 
 	ret = regmap_update_bits(rtc->regmap,
 				 config->rtc_enable_32k_crystal_reg,
 				 config->rtc_crystal_mask,
 				 config->rtc_crystal_mask);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Failed to run 32kHz oscillator\n");
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(&pdev->dev, ret,
+				     "Failed to run 32kHz oscillator\n");
 
 	ret = regmap_update_bits(rtc->regmap,
 				 config->rtc_alarm_secs_reg,
 				 config->rtc_alarm_status_mask,
 				 0);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Failed to access RTC alarm register\n");
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(&pdev->dev, ret,
+				     "Failed to access RTC alarm register\n");
 
 	ret = regmap_update_bits(rtc->regmap,
 				 config->rtc_alarm_secs_reg,
 				 DA9063_ALARM_STATUS_ALARM,
 				 DA9063_ALARM_STATUS_ALARM);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Failed to access RTC alarm register\n");
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(&pdev->dev, ret,
+				     "Failed to access RTC alarm register\n");
 
 	ret = regmap_update_bits(rtc->regmap,
 				 config->rtc_alarm_year_reg,
 				 config->rtc_tick_on_mask,
 				 0);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Failed to disable TICKs\n");
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(&pdev->dev, ret,
+				     "Failed to disable TICKs\n");
 
 	data[RTC_SEC] = 0;
 	ret = regmap_bulk_read(rtc->regmap,
 			       config->rtc_alarm_secs_reg,
 			       &data[config->rtc_data_start],
 			       config->rtc_alarm_len);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Failed to read initial alarm data: %d\n",
-			ret);
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(&pdev->dev, ret,
+				     "Failed to read initial alarm data\n");
 
 	platform_set_drvdata(pdev, rtc);