diff mbox series

dt-bindings: rtc: ds3231: Remove text binding

Message ID 20230902134407.2589099-1-festevam@gmail.com
State Accepted
Headers show
Series dt-bindings: rtc: ds3231: Remove text binding | expand

Commit Message

Fabio Estevam Sept. 2, 2023, 1:44 p.m. UTC 
From: Fabio Estevam <festevam@denx.de>

The "maxim,ds3231" compatible is described in the rtc-ds1307.yaml, so
there is no need to keep the text bindings version.

Remove the maxim,ds3231.txt file in favor of the rtc-ds1307.yaml binding.

Signed-off-by: Fabio Estevam <festevam@denx.de>
---
 .../devicetree/bindings/rtc/maxim,ds3231.txt  | 38 -------------------
 1 file changed, 38 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/rtc/maxim,ds3231.txt

Comments

Krzysztof Kozlowski Sept. 3, 2023, 5:29 p.m. UTC | #1 
On 02/09/2023 15:44, Fabio Estevam wrote:
> From: Fabio Estevam <festevam@denx.de>
> 
> The "maxim,ds3231" compatible is described in the rtc-ds1307.yaml, so
> there is no need to keep the text bindings version.
> 
> Remove the maxim,ds3231.txt file in favor of the rtc-ds1307.yaml binding.
> 
> Signed-off-by: Fabio Estevam <festevam@denx.de>

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
Alexandre Belloni Sept. 5, 2023, 11:28 p.m. UTC | #2 
On Sat, 02 Sep 2023 10:44:07 -0300, Fabio Estevam wrote:
> The "maxim,ds3231" compatible is described in the rtc-ds1307.yaml, so
> there is no need to keep the text bindings version.
> 
> Remove the maxim,ds3231.txt file in favor of the rtc-ds1307.yaml binding.
> 
> 

Applied, thanks!

[1/1] dt-bindings: rtc: ds3231: Remove text binding
      commit: ce413486c9a0d735d86cc7d88660abeac99c2501

Best regards,
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/rtc/maxim,ds3231.txt b/Documentation/devicetree/bindings/rtc/maxim,ds3231.txt
deleted file mode 100644
index 85be53a42180..000000000000
--- a/Documentation/devicetree/bindings/rtc/maxim,ds3231.txt
+++ /dev/null
@@ -1,38 +0,0 @@ 
-* Maxim DS3231 Real Time Clock
-
-Required properties:
-- compatible: Should contain "maxim,ds3231".
-- reg: I2C address for chip.
-
-Optional property:
-- #clock-cells: Should be 1.
-- clock-output-names:
-  overwrite the default clock names "ds3231_clk_sqw" and "ds3231_clk_32khz".
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. Following indices are allowed:
-    - 0: square-wave output on the SQW pin
-    - 1: square-wave output on the 32kHz pin
-
-- interrupts: rtc alarm/event interrupt. When this property is selected,
-  clock on the SQW pin cannot be used.
-
-Example:
-
-ds3231: ds3231@51 {
-	compatible = "maxim,ds3231";
-	reg = <0x68>;
-	#clock-cells = <1>;
-};
-
-device1 {
-...
-	clocks = <&ds3231 0>;
-...
-};
-
-device2 {
-...
-	clocks = <&ds3231 1>;
-...
-};