diff mbox series

[5/7] rtc: class: Support setting backup switch mode from devicetree

Message ID 20230201143431.863784-6-frieder@fris.de
State Rejected
Headers show
Series Enable backup switch mode on RTCs via devicetree | expand

Commit Message

Frieder Schrempf Feb. 1, 2023, 2:34 p.m. UTC 
From: Frieder Schrempf <frieder.schrempf@kontron.de>

Some RTC devices like the RV3028 have BSM disabled as factory default.
This makes the RTC quite useless if it is expected to preserve the
time on hardware that has a battery buffered supply for the RTC.

Let boards that have a buffered supply for the RTC available force
the BSM to the desired value via devicetree by setting the
'backup-switch-mode' property.

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
---
 drivers/rtc/class.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)
diff mbox series

Patch

diff --git a/drivers/rtc/class.c b/drivers/rtc/class.c
index e5b7b48cffac..79417d1fbeee 100644
--- a/drivers/rtc/class.c
+++ b/drivers/rtc/class.c
@@ -391,6 +391,11 @@  int __devm_rtc_register_device(struct module *owner, struct rtc_device *rtc)
 	struct rtc_wkalrm alrm;
 	int err;
 
+	struct rtc_param bsm = {
+		.param = RTC_PARAM_BACKUP_SWITCH_MODE,
+		.uvalue = RTC_BSM_DISABLED,
+	};
+
 	if (!rtc->ops) {
 		dev_dbg(&rtc->dev, "no ops set\n");
 		return -EINVAL;
@@ -402,6 +407,15 @@  int __devm_rtc_register_device(struct module *owner, struct rtc_device *rtc)
 	if (rtc->ops->set_offset)
 		set_bit(RTC_FEATURE_CORRECTION, rtc->features);
 
+	/* setup backup switching mode */
+	if (test_bit(RTC_FEATURE_BACKUP_SWITCH_MODE, rtc->features) &&
+	    !device_property_read_u32(rtc->dev.parent, "backup-switch-mode",
+				      (u32 *)&bsm.uvalue)) {
+		err = rtc->ops->param_set(rtc->dev.parent, &bsm);
+		if (err && err != -EINVAL)
+			return err;
+	}
+
 	rtc->owner = owner;
 	rtc_device_get_offset(rtc);