rtc: rtc-pm8xxx: Retrigger RTC alarm if it's fired before the driver probed

diff --git a/drivers/rtc/rtc-pm8xxx.c b/drivers/rtc/rtc-pm8xxx.c
old mode 100644
new mode 100755
index 29a1c65661e9..f213702a513c
--- a/drivers/rtc/rtc-pm8xxx.c
+++ b/drivers/rtc/rtc-pm8xxx.c
@@ -64,6 +64,62 @@  struct pm8xxx_rtc {
 	spinlock_t ctrl_reg_lock;
 };
 
+static int pm8xxx_rtc_read_rtc_data(struct pm8xxx_rtc *rtc_dd, unsigned long *rtc_data)
+{
+	int rc;
+	u8 value[NUM_8_BIT_RTC_REGS];
+	unsigned int reg;
+	const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
+
+	rc = regmap_bulk_read(rtc_dd->regmap, regs->read, value, sizeof(value));
+	if (rc) {
+		dev_err(rtc_dd->rtc_dev, "RTC read rtc data register failed\n");
+		return rc;
+	}
+
+	/*
+	 * Read the LSB again and check if there has been a carry over.
+	 * If there is, redo the read operation.
+	 */
+	rc = regmap_read(rtc_dd->regmap, regs->read, &reg);
+	if (rc < 0) {
+		dev_err(rtc_dd->rtc_dev, "RTC read rtc data register failed\n");
+		return rc;
+	}
+
+	if (unlikely(reg < value[0])) {
+		rc = regmap_bulk_read(rtc_dd->regmap, regs->read,
+				      value, sizeof(value));
+		if (rc) {
+			dev_err(rtc_dd->rtc_dev, "RTC read rtc data register failed\n");
+			return rc;
+		}
+	}
+
+	*rtc_data = value[0] | (value[1] << 8) | (value[2] << 16) |
+			((unsigned long)value[3] << 24);
+
+	return 0;
+}
+
+static int pm8xxx_rtc_read_alarm_data(struct pm8xxx_rtc *rtc_dd, unsigned long *alarm_data)
+{
+	int rc;
+	u8 value[NUM_8_BIT_RTC_REGS];
+
+	rc = regmap_bulk_read(rtc_dd->regmap, rtc_dd->regs->alarm_rw, value,
+			      sizeof(value));
+	if (rc) {
+		dev_err(rtc_dd->rtc_dev, "RTC read alarm data failed\n");
+		return rc;
+	}
+
+	*alarm_data = value[0] | (value[1] << 8) | (value[2] << 16) |
+			((unsigned long)value[3] << 24);
+
+	return 0;
+}
+
 /*
  * Steps to write the RTC registers.
  * 1. Disable alarm if enabled.
@@ -175,40 +231,15 @@  static int pm8xxx_rtc_set_time(struct device *dev, struct rtc_time *tm)
 static int pm8xxx_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
 	int rc;
-	u8 value[NUM_8_BIT_RTC_REGS];
 	unsigned long secs;
-	unsigned int reg;
 	struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
-	const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
 
-	rc = regmap_bulk_read(rtc_dd->regmap, regs->read, value, sizeof(value));
+	rc = pm8xxx_rtc_read_rtc_data(rtc_dd, &secs);
 	if (rc) {
-		dev_err(dev, "RTC read data register failed\n");
-		return rc;
-	}
-
-	/*
-	 * Read the LSB again and check if there has been a carry over.
-	 * If there is, redo the read operation.
-	 */
-	rc = regmap_read(rtc_dd->regmap, regs->read, &reg);
-	if (rc < 0) {
-		dev_err(dev, "RTC read data register failed\n");
+		dev_err(dev, "RTC read time failed\n");
 		return rc;
 	}
 
-	if (unlikely(reg < value[0])) {
-		rc = regmap_bulk_read(rtc_dd->regmap, regs->read,
-				      value, sizeof(value));
-		if (rc) {
-			dev_err(dev, "RTC read data register failed\n");
-			return rc;
-		}
-	}
-
-	secs = value[0] | (value[1] << 8) | (value[2] << 16) |
-	       ((unsigned long)value[3] << 24);
-
 	rtc_time64_to_tm(secs, tm);
 
 	dev_dbg(dev, "secs = %lu, h:m:s == %ptRt, y-m-d = %ptRdr\n", secs, tm, tm);
@@ -267,21 +298,16 @@  static int pm8xxx_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 {
 	int rc;
 	unsigned int ctrl_reg;
-	u8 value[NUM_8_BIT_RTC_REGS];
 	unsigned long secs;
 	struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
 	const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
 
-	rc = regmap_bulk_read(rtc_dd->regmap, regs->alarm_rw, value,
-			      sizeof(value));
+	rc = pm8xxx_rtc_read_alarm_data(rtc_dd, &secs);
 	if (rc) {
-		dev_err(dev, "RTC alarm time read failed\n");
+		dev_err(dev, "RTC alarm data read failed\n");
 		return rc;
 	}
 
-	secs = value[0] | (value[1] << 8) | (value[2] << 16) |
-	       ((unsigned long)value[3] << 24);
-
 	rtc_time64_to_tm(secs, &alarm->time);
 
 	rc = regmap_read(rtc_dd->regmap, regs->alarm_ctrl, &ctrl_reg);
@@ -394,6 +420,52 @@  static irqreturn_t pm8xxx_alarm_trigger(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+/*
+ * Trigger the alarm event and clear the alarm settings
+ * if the alarm data has been behind the RTC data which
+ * means the alarm has been triggered before the driver
+ * is probed.
+ */
+static int pm8xxx_rtc_init_alarm(struct pm8xxx_rtc *rtc_dd)
+{
+	int rc;
+	unsigned long rtc_data, alarm_data, irq_flags;
+	unsigned int ctrl_reg, alarm_en;
+	const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
+
+	spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
+
+	rc = pm8xxx_rtc_read_rtc_data(rtc_dd, &rtc_data);
+	if (rc) {
+		spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
+		dev_err(rtc_dd->rtc_dev, "rtc read rtc data failed\n");
+		return rc;
+	}
+
+	rc = pm8xxx_rtc_read_alarm_data(rtc_dd, &alarm_data);
+	if (rc) {
+		spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
+		dev_err(rtc_dd->rtc_dev, "rtc read alarm data failed\n");
+		return rc;
+	}
+
+	rc = regmap_read(rtc_dd->regmap, regs->alarm_ctrl, &ctrl_reg);
+	if (rc) {
+		spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
+		dev_err(rtc_dd->rtc_dev, "Read from RTC alarm control register failed\n");
+		return rc;
+	}
+
+	spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
+
+	alarm_en = !!(ctrl_reg & PM8xxx_RTC_ALARM_ENABLE);
+
+	if (alarm_en && rtc_data >= alarm_data)
+		pm8xxx_alarm_trigger(0, rtc_dd);
+
+	return 0;
+}
+
 static int pm8xxx_rtc_enable(struct pm8xxx_rtc *rtc_dd)
 {
 	const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
@@ -527,7 +599,13 @@  static int pm8xxx_rtc_probe(struct platform_device *pdev)
 		return rc;
 	}
 
-	return devm_rtc_register_device(rtc_dd->rtc);
+	rc =  devm_rtc_register_device(rtc_dd->rtc);
+	if (rc < 0) {
+		dev_err(&pdev->dev, "Register RTC device failed\n");
+		return rc;
+	}
+
+	return pm8xxx_rtc_init_alarm(rtc_dd);
 }
 
 #ifdef CONFIG_PM_SLEEP