diff mbox series

[3/3] rtc: pcf8523: use BIT

Message ID 20201118002747.1346504-3-alexandre.belloni@bootlin.com
State Accepted
Headers show
Series [1/3] rtc: pcf8523: switch to devm_rtc_allocate_device | expand

Commit Message

Alexandre Belloni Nov. 18, 2020, 12:27 a.m. UTC 
Use the BIT macro to define register bits.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
 drivers/rtc/rtc-pcf8523.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
diff mbox series

Patch

diff --git a/drivers/rtc/rtc-pcf8523.c b/drivers/rtc/rtc-pcf8523.c
index d5f913cb2ec9..5e1e7b2a8c9a 100644
--- a/drivers/rtc/rtc-pcf8523.c
+++ b/drivers/rtc/rtc-pcf8523.c
@@ -12,18 +12,18 @@ 
 #define DRIVER_NAME "rtc-pcf8523"
 
 #define REG_CONTROL1 0x00
-#define REG_CONTROL1_CAP_SEL (1 << 7)
-#define REG_CONTROL1_STOP    (1 << 5)
+#define REG_CONTROL1_CAP_SEL BIT(7)
+#define REG_CONTROL1_STOP    BIT(5)
 
 #define REG_CONTROL3 0x02
-#define REG_CONTROL3_PM_BLD (1 << 7) /* battery low detection disabled */
-#define REG_CONTROL3_PM_VDD (1 << 6) /* switch-over disabled */
-#define REG_CONTROL3_PM_DSM (1 << 5) /* direct switching mode */
+#define REG_CONTROL3_PM_BLD BIT(7) /* battery low detection disabled */
+#define REG_CONTROL3_PM_VDD BIT(6) /* switch-over disabled */
+#define REG_CONTROL3_PM_DSM BIT(5) /* direct switching mode */
 #define REG_CONTROL3_PM_MASK 0xe0
-#define REG_CONTROL3_BLF (1 << 2) /* battery low bit, read-only */
+#define REG_CONTROL3_BLF BIT(2) /* battery low bit, read-only */
 
 #define REG_SECONDS  0x03
-#define REG_SECONDS_OS (1 << 7)
+#define REG_SECONDS_OS BIT(7)
 
 #define REG_MINUTES  0x04
 #define REG_HOURS    0x05