| Message ID | 20201007220506.360469-1-alexandre.belloni@bootlin.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v2,1/3] dt-bindings: rtc: add trickle-voltage-millivolt | expand |
On Thu, Oct 08, 2020 at 12:05:04AM +0200, Alexandre Belloni wrote: > Some RTCs have a trickle charge that is able to output different voltages > depending on the type of the connected auxiliary power (battery, supercap, > ...). Add a property allowing to specify the necessary voltage. > > Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> > --- > > Changes in v2: > - use millivolt suffix instead of mV Try again... > > Documentation/devicetree/bindings/rtc/rtc.yaml | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/Documentation/devicetree/bindings/rtc/rtc.yaml b/Documentation/devicetree/bindings/rtc/rtc.yaml > index ee237b2ed66a..93f04d5e5307 100644 > --- a/Documentation/devicetree/bindings/rtc/rtc.yaml > +++ b/Documentation/devicetree/bindings/rtc/rtc.yaml > @@ -42,6 +42,13 @@ properties: > Selected resistor for trickle charger. Should be given > if trickle charger should be enabled. > > + trickle-voltage-mV: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + Selected voltage for trickle charger. Should be given > + if trickle charger should be enabled and the trickle voltage is different > + from the RTC main power supply. > + > wakeup-source: > $ref: /schemas/types.yaml#/definitions/flag > description: > -- > 2.26.2 >
On 13/10/2020 08:38:55-0500, Rob Herring wrote: > On Thu, Oct 08, 2020 at 12:05:04AM +0200, Alexandre Belloni wrote: > > Some RTCs have a trickle charge that is able to output different voltages > > depending on the type of the connected auxiliary power (battery, supercap, > > ...). Add a property allowing to specify the necessary voltage. > > > > Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> > > --- > > > > Changes in v2: > > - use millivolt suffix instead of mV > > Try again... Sorry, the change was wrongly squashed in patch 2/3, I've sent v3. > > > > > Documentation/devicetree/bindings/rtc/rtc.yaml | 7 +++++++ > > 1 file changed, 7 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/rtc/rtc.yaml b/Documentation/devicetree/bindings/rtc/rtc.yaml > > index ee237b2ed66a..93f04d5e5307 100644 > > --- a/Documentation/devicetree/bindings/rtc/rtc.yaml > > +++ b/Documentation/devicetree/bindings/rtc/rtc.yaml > > @@ -42,6 +42,13 @@ properties: > > Selected resistor for trickle charger. Should be given > > if trickle charger should be enabled. > > > > + trickle-voltage-mV: > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + description: > > + Selected voltage for trickle charger. Should be given > > + if trickle charger should be enabled and the trickle voltage is different > > + from the RTC main power supply. > > + > > wakeup-source: > > $ref: /schemas/types.yaml#/definitions/flag > > description: > > -- > > 2.26.2 > >
diff --git a/Documentation/devicetree/bindings/rtc/rtc.yaml b/Documentation/devicetree/bindings/rtc/rtc.yaml index ee237b2ed66a..93f04d5e5307 100644 --- a/Documentation/devicetree/bindings/rtc/rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/rtc.yaml @@ -42,6 +42,13 @@ properties: Selected resistor for trickle charger. Should be given if trickle charger should be enabled. + trickle-voltage-mV: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Selected voltage for trickle charger. Should be given + if trickle charger should be enabled and the trickle voltage is different + from the RTC main power supply. + wakeup-source: $ref: /schemas/types.yaml#/definitions/flag description:
Some RTCs have a trickle charge that is able to output different voltages depending on the type of the connected auxiliary power (battery, supercap, ...). Add a property allowing to specify the necessary voltage. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> --- Changes in v2: - use millivolt suffix instead of mV Documentation/devicetree/bindings/rtc/rtc.yaml | 7 +++++++ 1 file changed, 7 insertions(+)