diff mbox series

[v2,2/3] rtc: pcf2127: add "no-watchdog" property

Message ID 20200921054821.26071-2-qiang.zhao@nxp.com
State New
Headers show
Series [v2,1/3] dt-bindings: rtc: pcf2127: Add bindings for nxp,pcf2127 | expand

Commit Message

Qiang Zhao Sept. 21, 2020, 5:48 a.m. UTC
From: Zhao Qiang <qiang.zhao@nxp.com>

Commit 0e735eaae165 ("rtc: pcf2127: add watchdog feature support")
adds watchdog feature for pcf2127, then it will be registered as
a watchdog device even though it is not used as watchdog.
Pcf2127 always be registered as watchdog0(default watchdog device),
even though it is not used as watchdog, meanwhile there is another
real watchdog device registered as watchdog1.
So add "no-watchdog" property, if the node has this property,
driver will not register it as a watchdog device

Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
---
 drivers/rtc/rtc-pcf2127.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c
index ed63169..b50158a 100644
--- a/drivers/rtc/rtc-pcf2127.c
+++ b/drivers/rtc/rtc-pcf2127.c
@@ -624,9 +624,11 @@  static int pcf2127_probe(struct device *dev, struct regmap *regmap,
 		set_bit(WDOG_HW_RUNNING, &pcf2127->wdd.status);
 
 #ifdef CONFIG_WATCHDOG
-	ret = devm_watchdog_register_device(dev, &pcf2127->wdd);
-	if (ret)
-		return ret;
+	if (!of_property_read_bool(dev->of_node, "no-watchdog")) {
+		ret = devm_watchdog_register_device(dev, &pcf2127->wdd);
+		if (ret)
+			return ret;
+	}
 #endif /* CONFIG_WATCHDOG */
 
 	/*