diff mbox series

rtc: ds1307: Ensure oscillator is enabled for DS1388

Message ID 20200816235731.21071-1-chris.packham@alliedtelesis.co.nz
State Accepted
Headers show
Series rtc: ds1307: Ensure oscillator is enabled for DS1388 | expand

Commit Message

Chris Packham Aug. 16, 2020, 11:57 p.m. UTC
Similar to the other variants the DS1388 has a bit to stop the
oscillator to reduce the power consumption from VBAT. Ensure that the
oscillator is enabled when the system is up.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---
 drivers/rtc/rtc-ds1307.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

Comments

Alexandre Belloni Aug. 20, 2020, 10:19 p.m. UTC | #1
On Mon, 17 Aug 2020 11:57:31 +1200, Chris Packham wrote:
> Similar to the other variants the DS1388 has a bit to stop the
> oscillator to reduce the power consumption from VBAT. Ensure that the
> oscillator is enabled when the system is up.

Applied, thanks!

[1/1] rtc: ds1307: Ensure oscillator is enabled for DS1388
      commit: 59ed0127155201863db49f3dc5fb41316433340a

Best regards,
diff mbox series

Patch

diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
index 54c85cdd019d..2182f4e97c0a 100644
--- a/drivers/rtc/rtc-ds1307.c
+++ b/drivers/rtc/rtc-ds1307.c
@@ -153,6 +153,7 @@  enum ds_type {
 #define DS1388_REG_CONTROL		0x0c
 #	define DS1388_BIT_RST		BIT(0)
 #	define DS1388_BIT_WDE		BIT(1)
+#	define DS1388_BIT_nEOSC		BIT(7)
 
 /* negative offset step is -2.034ppm */
 #define M41TXX_NEG_OFFSET_STEP_PPB	2034
@@ -1881,6 +1882,19 @@  static int ds1307_probe(struct i2c_client *client,
 				     DS1307_REG_HOUR << 4 | 0x08, hour);
 		}
 		break;
+	case ds_1388:
+		err = regmap_read(ds1307->regmap, DS1388_REG_CONTROL, &tmp);
+		if (err) {
+			dev_dbg(ds1307->dev, "read error %d\n", err);
+			goto exit;
+		}
+
+		/* oscillator off?  turn it on, so clock can tick. */
+		if (tmp & DS1388_BIT_nEOSC) {
+			tmp &= ~DS1388_BIT_nEOSC;
+			regmap_write(ds1307->regmap, DS1388_REG_CONTROL, tmp);
+		}
+		break;
 	default:
 		break;
 	}