From patchwork Tue Dec 5 14:06:46 2017 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: linux-kernel-dev X-Patchwork-Id: 844769 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=none (mailfrom) smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67; helo=vger.kernel.org; envelope-from=linux-rtc-owner@vger.kernel.org; receiver=) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 3yrkBl0Q07z9t8J for ; Wed, 6 Dec 2017 01:09:19 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753122AbdLEOIV convert rfc822-to-8bit (ORCPT ); Tue, 5 Dec 2017 09:08:21 -0500 Received: from netsrv01.beckhoff.com ([62.159.14.10]:62136 "EHLO Netsrv01.beckhoff.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753363AbdLEOH1 (ORCPT ); Tue, 5 Dec 2017 09:07:27 -0500 Received: from lbs1.beckhoff.com (172.17.64.137) by NT-Mail06.beckhoff.com (10.1.0.30) with Microsoft SMTP Server (TLS) id 14.3.301.0; Tue, 5 Dec 2017 15:07:25 +0100 From: To: Shawn Guo , Sascha Hauer , Alessandro Zummo , Alexandre Belloni CC: Patrick Bruenn , Rob Herring , Mark Rutland , "open list:REAL TIME CLOCK (RTC) SUBSYSTEM" , "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" , open list , Fabio Estevam , Juergen Borleis , Noel Vellemans , Russell King , "moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE" , Philippe Ombredanne , =?utf-8?q?Lothar_Wa=C3=9Fmann?= Subject: [PATCH v2 5/5] rtc: add mxc driver for i.MX53 SRTC Date: Tue, 5 Dec 2017 15:06:46 +0100 Message-ID: <20171205140646.30367-6-linux-kernel-dev@beckhoff.com> X-Mailer: git-send-email 2.11.0 In-Reply-To: <20171205140646.30367-1-linux-kernel-dev@beckhoff.com> References: <20171205140646.30367-1-linux-kernel-dev@beckhoff.com> MIME-Version: 1.0 X-Originating-IP: [172.17.64.137] X-OLX-Disclaimer: Done Sender: linux-rtc-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-rtc@vger.kernel.org From: Patrick Bruenn Neither rtc-imxdi, rtc-mxc nor rtc-snvs are compatible with i.MX53. This is driver enables support for the low power domain SRTC features: - 32-bit MSB of non-rollover time counter - 32-bit alarm register Based on: http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/tree/drivers/rtc/rtc-mxc_v2.c?h=imx_2.6.35_11.09.01 Signed-off-by: Patrick Bruenn --- v2: - have seperate patches for dt-binding, CONFIG option, imx53.dtsi and driver - add SPDX-License-Identifier and cleanup copyright notice - replace __raw_readl/writel() with readl/writel() - fix PM_SLEEP callbacks - add CONFIG_RTC_DRV_MXC_V2 to build rtc-mxc_v2.c - remove misleading or obvious comments and fix style of the remaining - avoid endless loop while waiting for hw - implement consistent locking; make spinlock a member of dev struct - enable clk only for register accesses - remove all udelay() calls since they are obsolete or redundant (we are already waiting for register flags to change) - init platform_data before registering irq callback - let set_time() fail, when 32 bit rtc counter exceeded - make names more consistent - cleanup and reorder includes - cleanup and remove unused defines To: Alessandro Zummo To: Alexandre Belloni Cc: Rob Herring Cc: Mark Rutland (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS) Cc: linux-rtc@vger.kernel.org (open list:REAL TIME CLOCK (RTC) SUBSYSTEM) Cc: devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS) Cc: linux-kernel@vger.kernel.org (open list) Cc: Fabio Estevam Cc: Juergen Borleis Cc: Noel Vellemans Cc: Shawn Guo Cc: Sascha Hauer (maintainer:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE) Cc: Russell King (maintainer:ARM PORT) Cc: linux-arm-kernel@lists.infradead.org (moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE) Cc: Philippe Ombredanne Cc: Lothar Waßmann --- drivers/rtc/Makefile | 1 + drivers/rtc/rtc-mxc_v2.c | 433 +++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 434 insertions(+) create mode 100644 drivers/rtc/rtc-mxc_v2.c diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index f2f50c11dc38..dcf60e61ae5c 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -106,6 +106,7 @@ obj-$(CONFIG_RTC_DRV_MT6397) += rtc-mt6397.o obj-$(CONFIG_RTC_DRV_MT7622) += rtc-mt7622.o obj-$(CONFIG_RTC_DRV_MV) += rtc-mv.o obj-$(CONFIG_RTC_DRV_MXC) += rtc-mxc.o +obj-$(CONFIG_RTC_DRV_MXC_V2) += rtc-mxc_v2.o obj-$(CONFIG_RTC_DRV_NUC900) += rtc-nuc900.o obj-$(CONFIG_RTC_DRV_OMAP) += rtc-omap.o obj-$(CONFIG_RTC_DRV_OPAL) += rtc-opal.o diff --git a/drivers/rtc/rtc-mxc_v2.c b/drivers/rtc/rtc-mxc_v2.c new file mode 100644 index 000000000000..c5a6d2c293bb --- /dev/null +++ b/drivers/rtc/rtc-mxc_v2.c @@ -0,0 +1,433 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Real Time Clock (RTC) Driver for i.MX53 + * Copyright (c) 2004-2011 Freescale Semiconductor, Inc. + * Copyright (c) 2017 Beckhoff Automation GmbH & Co. KG + */ + +#include +#include +#include +#include +#include + +#define SRTC_LPPDR_INIT 0x41736166 /* init for glitch detect */ + +#define SRTC_LPCR_EN_LP BIT(3) /* lp enable */ +#define SRTC_LPCR_WAE BIT(4) /* lp wakeup alarm enable */ +#define SRTC_LPCR_ALP BIT(7) /* lp alarm flag */ +#define SRTC_LPCR_NSA BIT(11) /* lp non secure access */ +#define SRTC_LPCR_NVE BIT(14) /* lp non valid state exit bit */ +#define SRTC_LPCR_IE BIT(15) /* lp init state exit bit */ + +#define SRTC_LPSR_ALP BIT(3) /* lp alarm flag */ +#define SRTC_LPSR_NVES BIT(14) /* lp non-valid state exit status */ +#define SRTC_LPSR_IES BIT(15) /* lp init state exit status */ + +#define SRTC_LPSCMR 0x00 /* LP Secure Counter MSB Reg */ +#define SRTC_LPSCLR 0x04 /* LP Secure Counter LSB Reg */ +#define SRTC_LPSAR 0x08 /* LP Secure Alarm Reg */ +#define SRTC_LPCR 0x10 /* LP Control Reg */ +#define SRTC_LPSR 0x14 /* LP Status Reg */ +#define SRTC_LPPDR 0x18 /* LP Power Supply Glitch Detector Reg */ + +/* max. number of retries to read registers, 120 was max during test */ +#define REG_READ_TIMEOUT 2000 + +struct mxc_rtc_data { + struct rtc_device *rtc; + void __iomem *ioaddr; + struct clk *clk; + spinlock_t lock; /* protects register access */ + int irq; +}; + +/* + * This function does write synchronization for writes to the lp srtc block. + * To take care of the asynchronous CKIL clock, all writes from the IP domain + * will be synchronized to the CKIL domain. + * The caller should hold the pdata->lock + */ +static inline void mxc_rtc_sync_lp_locked(void __iomem *ioaddr) +{ + unsigned int i; + + /* Wait for 3 CKIL cycles */ + for (i = 0; i < 3; i++) { + const u32 count = readl(ioaddr + SRTC_LPSCLR); + unsigned int timeout = REG_READ_TIMEOUT; + + while ((readl(ioaddr + SRTC_LPSCLR)) == count) { + if (!--timeout) { + pr_err("SRTC_LPSCLR stuck! Check your hw.\n"); + return; + } + } + } +} + +/* + * This function updates the RTC alarm registers and then clears all the + * interrupt status bits. + * The caller should hold the pdata->lock + * + * @param alrm the new alarm value to be updated in the RTC + * + * @return 0 if successful; non-zero otherwise. + */ +static int mxc_rtc_write_alarm_locked(struct mxc_rtc_data *const pdata, + struct rtc_time *alarm_tm) +{ + void __iomem *const ioaddr = pdata->ioaddr; + unsigned long time; + + rtc_tm_to_time(alarm_tm, &time); + + if (time > U32_MAX) { + pr_err("Hopefully I am out of service by then :-(\n"); + return -EINVAL; + } + + writel((u32)time, ioaddr + SRTC_LPSAR); + + /* clear alarm interrupt status bit */ + writel(SRTC_LPSR_ALP, ioaddr + SRTC_LPSR); + + mxc_rtc_sync_lp_locked(ioaddr); + return 0; +} + +/* This function is the RTC interrupt service routine. */ +static irqreturn_t mxc_rtc_interrupt(int irq, void *dev_id) +{ + struct platform_device *pdev = dev_id; + struct mxc_rtc_data *pdata = platform_get_drvdata(pdev); + void __iomem *ioaddr = pdata->ioaddr; + unsigned long flags; + u32 events = 0; + u32 lp_status; + u32 lp_cr; + + spin_lock_irqsave(&pdata->lock, flags); + if (clk_prepare_enable(pdata->clk)) { + spin_unlock_irqrestore(&pdata->lock, flags); + return IRQ_NONE; + } + + lp_status = readl(ioaddr + SRTC_LPSR); + lp_cr = readl(ioaddr + SRTC_LPCR); + + /* update irq data & counter */ + if (lp_status & SRTC_LPSR_ALP) { + if (lp_cr & SRTC_LPCR_ALP) + events = (RTC_AF | RTC_IRQF); + + /* disable further lp alarm interrupts */ + lp_cr &= ~(SRTC_LPCR_ALP | SRTC_LPCR_WAE); + } + + /* Update interrupt enables */ + writel(lp_cr, ioaddr + SRTC_LPCR); + + /* clear interrupt status */ + writel(lp_status, ioaddr + SRTC_LPSR); + + mxc_rtc_sync_lp_locked(ioaddr); + rtc_update_irq(pdata->rtc, 1, events); + clk_disable_unprepare(pdata->clk); + spin_unlock_irqrestore(&pdata->lock, flags); + return IRQ_HANDLED; +} + +/* + * Enable clk and aquire spinlock + * @return 0 if successful; non-zero otherwise. + */ +static int mxc_rtc_lock(struct mxc_rtc_data *const pdata) +{ + int ret; + + spin_lock_irq(&pdata->lock); + ret = clk_prepare_enable(pdata->clk); + if (ret) { + spin_unlock_irq(&pdata->lock); + return ret; + } + return 0; +} + +static int mxc_rtc_unlock(struct mxc_rtc_data *const pdata) +{ + clk_disable_unprepare(pdata->clk); + spin_unlock_irq(&pdata->lock); + return 0; +} + +/* + * This function reads the current RTC time into tm in Gregorian date. + * + * @param tm contains the RTC time value upon return + * + * @return 0 if successful; non-zero otherwise. + */ +static int mxc_rtc_read_time(struct device *dev, struct rtc_time *tm) +{ + struct mxc_rtc_data *pdata = dev_get_drvdata(dev); + time_t now; + int ret = mxc_rtc_lock(pdata); + + if (ret) + return ret; + + now = readl(pdata->ioaddr + SRTC_LPSCMR); + rtc_time_to_tm(now, tm); + ret = rtc_valid_tm(tm); + mxc_rtc_unlock(pdata); + return ret; +} + +/* + * This function sets the internal RTC time based on tm in Gregorian date. + * + * @param tm the time value to be set in the RTC + * + * @return 0 if successful; non-zero otherwise. + */ +static int mxc_rtc_set_time(struct device *dev, struct rtc_time *tm) +{ + struct mxc_rtc_data *pdata = dev_get_drvdata(dev); + time64_t time = rtc_tm_to_time64(tm); + int ret; + + if (time > U32_MAX) { + dev_err(dev, "RTC exceeded by %llus\n", time - U32_MAX); + return -EINVAL; + } + + ret = mxc_rtc_lock(pdata); + if (ret) + return ret; + + writel(time, pdata->ioaddr + SRTC_LPSCMR); + mxc_rtc_sync_lp_locked(pdata->ioaddr); + return mxc_rtc_unlock(pdata); +} + +/* + * This function reads the current alarm value into the passed in \b alrm + * argument. It updates the \b alrm's pending field value based on the whether + * an alarm interrupt occurs or not. + * + * @param alrm contains the RTC alarm value upon return + * + * @return 0 if successful; non-zero otherwise. + */ +static int mxc_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct mxc_rtc_data *pdata = dev_get_drvdata(dev); + void __iomem *ioaddr = pdata->ioaddr; + int ret; + + ret = mxc_rtc_lock(pdata); + if (ret) + return ret; + + rtc_time_to_tm(readl(ioaddr + SRTC_LPSAR), &alrm->time); + alrm->pending = !!(readl(ioaddr + SRTC_LPSR) & SRTC_LPSR_ALP); + return mxc_rtc_unlock(pdata); +} + +/* + * Enable/Disable alarm interrupt + * The caller should hold the pdata->lock + */ +static void mxc_rtc_alarm_irq_enable_locked(struct mxc_rtc_data *pdata, + unsigned int enable) +{ + u32 lp_cr = readl(pdata->ioaddr + SRTC_LPCR); + + if (enable) + lp_cr |= (SRTC_LPCR_ALP | SRTC_LPCR_WAE); + else + lp_cr &= ~(SRTC_LPCR_ALP | SRTC_LPCR_WAE); + + writel(lp_cr, pdata->ioaddr + SRTC_LPCR); +} + +static int mxc_rtc_alarm_irq_enable(struct device *dev, unsigned int enable) +{ + struct mxc_rtc_data *pdata = dev_get_drvdata(dev); + int ret = mxc_rtc_lock(pdata); + + if (ret) + return ret; + + mxc_rtc_alarm_irq_enable_locked(pdata, enable); + return mxc_rtc_unlock(pdata); +} + +/* + * This function sets the RTC alarm based on passed in alrm. + * + * @param alrm the alarm value to be set in the RTC + * + * @return 0 if successful; non-zero otherwise. + */ +static int mxc_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct mxc_rtc_data *pdata = dev_get_drvdata(dev); + int ret = mxc_rtc_lock(pdata); + + if (ret) + return ret; + + ret = mxc_rtc_write_alarm_locked(pdata, &alrm->time); + if (!ret) { + mxc_rtc_alarm_irq_enable_locked(pdata, alrm->enabled); + mxc_rtc_sync_lp_locked(pdata->ioaddr); + } + mxc_rtc_unlock(pdata); + return ret; +} + +static const struct rtc_class_ops mxc_rtc_ops = { + .read_time = mxc_rtc_read_time, + .set_time = mxc_rtc_set_time, + .read_alarm = mxc_rtc_read_alarm, + .set_alarm = mxc_rtc_set_alarm, + .alarm_irq_enable = mxc_rtc_alarm_irq_enable, +}; + +static int mxc_rtc_wait_for_flag(void *__iomem ioaddr, int flag) +{ + unsigned int timeout = REG_READ_TIMEOUT; + + while (!(readl(ioaddr) & flag)) { + if (!--timeout) { + pr_err("Wait timeout for 0x%x@%p!\n", flag, ioaddr); + return -EBUSY; + } + } + return 0; +} + +static int mxc_rtc_probe(struct platform_device *pdev) +{ + struct mxc_rtc_data *pdata; + struct resource *res; + void __iomem *ioaddr; + int ret = 0; + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + + pdata->ioaddr = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(pdata->ioaddr)) + return PTR_ERR(pdata->ioaddr); + + ioaddr = pdata->ioaddr; + + pdata->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(pdata->clk)) { + dev_err(&pdev->dev, "unable to get rtc clock!\n"); + return PTR_ERR(pdata->clk); + } + + spin_lock_init(&pdata->lock); + pdata->irq = platform_get_irq(pdev, 0); + if (pdata->irq < 0) + return pdata->irq; + + device_init_wakeup(&pdev->dev, 1); + + ret = clk_prepare_enable(pdata->clk); + if (ret) + return ret; + /* initialize glitch detect */ + writel(SRTC_LPPDR_INIT, ioaddr + SRTC_LPPDR); + + /* clear lp interrupt status */ + writel(0xFFFFFFFF, ioaddr + SRTC_LPSR); + + /* move out of init state */ + writel((SRTC_LPCR_IE | SRTC_LPCR_NSA), ioaddr + SRTC_LPCR); + mxc_rtc_wait_for_flag(ioaddr + SRTC_LPSR, SRTC_LPSR_IES); + + /* move out of non-valid state */ + writel((SRTC_LPCR_IE | SRTC_LPCR_NVE | SRTC_LPCR_NSA | + SRTC_LPCR_EN_LP), ioaddr + SRTC_LPCR); + mxc_rtc_wait_for_flag(ioaddr + SRTC_LPSR, SRTC_LPSR_NVES); + + clk_disable_unprepare(pdata->clk); + platform_set_drvdata(pdev, pdata); + ret = + devm_request_irq(&pdev->dev, pdata->irq, mxc_rtc_interrupt, 0, + pdev->name, pdev); + if (ret < 0) { + dev_err(&pdev->dev, "interrupt not available.\n"); + return ret; + } + + pdata->rtc = + devm_rtc_device_register(&pdev->dev, pdev->name, &mxc_rtc_ops, + THIS_MODULE); + if (IS_ERR(pdata->rtc)) + return PTR_ERR(pdata->rtc); + + return 0; +} + +static int __exit mxc_rtc_remove(struct platform_device *pdev) +{ + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int mxc_rtc_suspend(struct device *dev) +{ + struct mxc_rtc_data *pdata = dev_get_drvdata(dev); + + if (device_may_wakeup(dev)) + enable_irq_wake(pdata->irq); + + return 0; +} + +static int mxc_rtc_resume(struct device *dev) +{ + struct mxc_rtc_data *pdata = dev_get_drvdata(dev); + + if (device_may_wakeup(dev)) + disable_irq_wake(pdata->irq); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(mxc_rtc_pm_ops, mxc_rtc_suspend, mxc_rtc_resume); + +static const struct of_device_id mxc_ids[] = { + { .compatible = "fsl,imx53-rtc", }, + {} +}; + +static struct platform_driver mxc_rtc_driver = { + .driver = { + .name = "mxc_rtc_v2", + .of_match_table = mxc_ids, + .pm = &mxc_rtc_pm_ops, + }, + .probe = mxc_rtc_probe, + .remove = mxc_rtc_remove, +}; + +module_platform_driver(mxc_rtc_driver); + +MODULE_AUTHOR("Freescale Semiconductor, Inc."); +MODULE_DESCRIPTION("Real Time Clock (RTC) Driver for i.MX53"); +MODULE_LICENSE("GPL");