@@ -774,6 +774,7 @@ static int m41t80_probe(struct i2c_client *client,
struct rtc_device *rtc = NULL;
struct rtc_time tm;
struct m41t80_data *m41t80_data = NULL;
+ bool wakeup_source = false;
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK |
I2C_FUNC_SMBUS_BYTE_DATA)) {
@@ -789,6 +790,10 @@ static int m41t80_probe(struct i2c_client *client,
m41t80_data->features = id->driver_data;
i2c_set_clientdata(client, m41t80_data);
+#ifdef CONFIG_OF
+ wakeup_source = of_property_read_bool(client->dev.of_node,
+ "wakeup-source");
+#endif
if (client->irq > 0) {
rc = devm_request_threaded_irq(&client->dev, client->irq,
NULL, m41t80_handle_irq,
@@ -797,14 +802,16 @@ static int m41t80_probe(struct i2c_client *client,
if (rc) {
dev_warn(&client->dev, "unable to request IRQ, alarms disabled\n");
client->irq = 0;
- } else {
- m41t80_rtc_ops.read_alarm = m41t80_read_alarm;
- m41t80_rtc_ops.set_alarm = m41t80_set_alarm;
- m41t80_rtc_ops.alarm_irq_enable = m41t80_alarm_irq_enable;
- /* Enable the wakealarm */
- device_init_wakeup(&client->dev, true);
+ wakeup_source = false;
}
}
+ if (client->irq > 0 || wakeup_source) {
+ m41t80_rtc_ops.read_alarm = m41t80_read_alarm;
+ m41t80_rtc_ops.set_alarm = m41t80_set_alarm;
+ m41t80_rtc_ops.alarm_irq_enable = m41t80_alarm_irq_enable;
+ /* Enable the wakealarm */
+ device_init_wakeup(&client->dev, true);
+ }
rtc = devm_rtc_device_register(&client->dev, client->name,
&m41t80_rtc_ops, THIS_MODULE);
@@ -812,6 +819,10 @@ static int m41t80_probe(struct i2c_client *client,
return PTR_ERR(rtc);
m41t80_data->rtc = rtc;
+ if (client->irq <= 0) {
+ /* We cannot support UIE mode if we do not have an IRQ line */
+ rtc->uie_unsupported = 1;
+ }
/* Make sure HT (Halt Update) bit is cleared */
rc = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_HOUR);
Don't require an IRQ if the wakeup-source device-tree property is present. Signed-off-by: Eric Cooper <ecc@cmu.edu> --- drivers/rtc/rtc-m41t80.c | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-)