Message ID | 20121218163009.fb21fec8.akpm@linux-foundation.org |
---|---|
State | Superseded |
Headers | show |
Hi, Andrew, On 2012년 12월 19일 09:30, Andrew Morton wrote: > On Wed, 28 Nov 2012 15:50:57 +0900 > Jonghwa Lee <jonghwa3.lee@samsung.com> wrote: > >> Add driver for support max77686 rtc. >> MAX77686 rtc support smpl and wtsr mode. It has two alarm register >> which can be used for alarming to wake system up. This drvier uses regmap >> to access its register. >> >> ... >> >> +static inline int max77686_rtc_calculate_wday(u8 shifted) >> +{ >> + int counter = -1; >> + while (shifted) { >> + shifted >>= 1; >> + counter++; >> + } >> + return counter; >> +} > > We should be able to use log2() in here? > Okay, and I'd like to use Joe's recommendation. fls(shitfted) - 1 >> >> ... >> >> +static inline int max77686_rtc_update(struct max77686_rtc_info *info, >> + enum MAX77686_RTC_OP op) >> +{ >> + int ret; >> + unsigned int data; >> + >> + switch (op) { >> + case MAX77686_RTC_WRITE: >> + data = 1 << RTC_UDR_SHIFT; >> + break; >> + case MAX77686_RTC_READ: >> + data = 1 << RTC_RBUDR_SHIFT; >> + break; >> + } >> + >> + ret = regmap_update_bits(info->max77686->rtc_regmap, >> + MAX77686_RTC_UPDATE0, data, data); >> + if (ret < 0) >> + dev_err(info->dev, "%s: fail to write update reg(ret=%d, data=0x%x)\n", >> + __func__, ret, data); >> + else { >> + /* Minimum 16ms delay required before RTC update. */ >> + msleep(MAX77686_RTC_UPDATE_DELAY); >> + } >> + >> + return ret; >> +} > > This function has about ten callers. No way in the world do we want it > to be inlined! Probably the compiler will just ignore your `inline', > but we should remove it to be sure. > Okay, I'll remove it. >> >> ... >> >> +static const struct rtc_class_ops max77686_rtc_ops = { >> + .read_time = max77686_rtc_read_time, >> + .set_time = max77686_rtc_set_time, >> + .read_alarm = max77686_rtc_read_alarm, >> + .set_alarm = max77686_rtc_set_alarm, >> + .alarm_irq_enable = max77686_rtc_alarm_irq_enable, >> +}; >> + >> +#ifdef MAX77686_RTC_WTSR_SMPL > > hm, this is always undefined. Why is this code here? > Yes, you're right, It isn't needed. I'll fix it right. >> +static void max77686_rtc_enable_wtsr(struct max77686_rtc_info *info, bool enable) >> +{ >> + int ret; >> + unsigned int val, mask; >> + >> + if (enable) >> + val = (1 << WTSR_EN_SHIFT) | (3 << WTSRT_SHIFT); >> + else >> + val = 0; >> + >> + mask = WTSR_EN_MASK | WTSRT_MASK; >> + >> + dev_info(info->dev, "%s: %s WTSR\n", __func__, >> + enable ? "enable" : "disable"); >> + >> + ret = regmap_update_bits(info->max77686->rtc_regmap, >> + MAX77686_WTSR_SMPL_CNTL, mask, val); >> + if (ret < 0) { >> + dev_err(info->dev, "%s: fail to update WTSR reg(%d)\n", >> + __func__, ret); >> + return; >> + } >> + >> + max77686_rtc_update(info, MAX77686_RTC_WRITE); >> +} >> + >> +static void max77686_rtc_enable_smpl(struct max77686_rtc_info *info, bool enable) >> +{ >> + int ret; >> + unsigned int val, mask; >> + >> + if (enable) >> + val = (1 << SMPL_EN_SHIFT) | (0 << SMPLT_SHIFT); >> + else >> + val = 0; >> + >> + mask = SMPL_EN_MASK | SMPLT_MASK; >> + >> + dev_info(info->dev, "%s: %s SMPL\n", __func__, >> + enable ? "enable" : "disable"); >> + >> + ret = regmap_update_bits(info->max77686->rtc_regmap, >> + MAX77686_WTSR_SMPL_CNTL, mask, val); >> + if (ret < 0) { >> + dev_err(info->dev, "%s: fail to update SMPL reg(%d)\n", >> + __func__, ret); >> + return; >> + } >> + >> + max77686_rtc_update(info, MAX77686_RTC_WRITE); >> + >> + val = 0; >> + regmap_read(info->max77686->rtc_regmap, MAX77686_WTSR_SMPL_CNTL, &val); >> + pr_info("%s: WTSR_SMPL(0x%02x)\n", __func__, val); >> +} >> +#endif /* MAX77686_RTC_WTSR_SMPL */ >> >> ... >> >> +static int __devinit max77686_rtc_probe(struct platform_device *pdev) > > CONFIG_HOTPLUG is removed, so we should stop using devinit, devexit, > devinit_p, etc. > >> >> ... >> > > --- a/drivers/rtc/rtc-max77686.c~rtc-max77686-add-maxim-77686-driver-fix > +++ a/drivers/rtc/rtc-max77686.c > @@ -129,7 +129,7 @@ static int max77686_rtc_tm_to_data(struc > return 0; > } > > -static inline int max77686_rtc_update(struct max77686_rtc_info *info, > +static int max77686_rtc_update(struct max77686_rtc_info *info, > enum MAX77686_RTC_OP op) > { > int ret; > @@ -501,7 +501,7 @@ static struct regmap_config max77686_rtc > .val_bits = 8, > }; > > -static int __devinit max77686_rtc_probe(struct platform_device *pdev) > +static int max77686_rtc_probe(struct platform_device *pdev) > { > struct max77686_dev *max77686 = dev_get_drvdata(pdev->dev.parent); > struct max77686_rtc_info *info; > @@ -575,7 +575,7 @@ out: > return ret; > } > > -static int __devexit max77686_rtc_remove(struct platform_device *pdev) > +static int max77686_rtc_remove(struct platform_device *pdev) > { > struct max77686_rtc_info *info = platform_get_drvdata(pdev); > > @@ -623,7 +623,7 @@ static struct platform_driver max77686_r > .owner = THIS_MODULE, > }, > .probe = max77686_rtc_probe, > - .remove = __devexit_p(max77686_rtc_remove), > + .remove = max77686_rtc_remove, > .shutdown = max77686_rtc_shutdown, > .id_table = rtc_id, > }; > _ > > Best regards Jonghwa.
--- a/drivers/rtc/rtc-max77686.c~rtc-max77686-add-maxim-77686-driver-fix +++ a/drivers/rtc/rtc-max77686.c @@ -129,7 +129,7 @@ static int max77686_rtc_tm_to_data(struc return 0; } -static inline int max77686_rtc_update(struct max77686_rtc_info *info, +static int max77686_rtc_update(struct max77686_rtc_info *info, enum MAX77686_RTC_OP op) { int ret; @@ -501,7 +501,7 @@ static struct regmap_config max77686_rtc .val_bits = 8, }; -static int __devinit max77686_rtc_probe(struct platform_device *pdev) +static int max77686_rtc_probe(struct platform_device *pdev) { struct max77686_dev *max77686 = dev_get_drvdata(pdev->dev.parent); struct max77686_rtc_info *info; @@ -575,7 +575,7 @@ out: return ret; } -static int __devexit max77686_rtc_remove(struct platform_device *pdev) +static int max77686_rtc_remove(struct platform_device *pdev) { struct max77686_rtc_info *info = platform_get_drvdata(pdev); @@ -623,7 +623,7 @@ static struct platform_driver max77686_r .owner = THIS_MODULE, }, .probe = max77686_rtc_probe, - .remove = __devexit_p(max77686_rtc_remove), + .remove = max77686_rtc_remove, .shutdown = max77686_rtc_shutdown, .id_table = rtc_id, };