diff mbox series

[v2,2/3] dt-bindings: rtc: add microchip,sam9x60-rtt

Message ID 1591779936-18577-3-git-send-email-claudiu.beznea@microchip.com
State Accepted
Headers show
Series add RTT support for SAM9X60 | expand

Commit Message

Claudiu Beznea June 10, 2020, 9:05 a.m. UTC 
Add microchip,sam9x60-rtt to compatible list.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

Comments

Rob Herring June 17, 2020, 10:22 p.m. UTC | #1 
On Wed, 10 Jun 2020 12:05:35 +0300, Claudiu Beznea wrote:
> Add microchip,sam9x60-rtt to compatible list.
> 
> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
> ---
>  Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 

Acked-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt b/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt
index 6ae79d1843f3..3f0e2a5950eb 100644
--- a/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt
+++ b/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt
@@ -1,7 +1,9 @@ 
 Atmel AT91SAM9260 Real Time Timer
 
 Required properties:
-- compatible: should be: "atmel,at91sam9260-rtt"
+- compatible: should be one of the following:
+	- "atmel,at91sam9260-rtt"
+	- "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt"
 - reg: should encode the memory region of the RTT controller
 - interrupts: rtt alarm/event interrupt
 - clocks: should contain the 32 KHz slow clk that will drive the RTT block.