diff --git a/MAINTAINERS b/MAINTAINERS
index 2f3eba4..002fcd7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16125,6 +16125,12 @@ L:	linux-gpio@vger.kernel.org
 S:	Maintained
 F:	drivers/gpio/gpio-wcove.c
 
+WHWAVE RTC DRIVER
+M:	Zoro Li <long17.cool@163.com>
+L:	linux-rtc@vger.kernel.org
+S:	Maintained
+F:	drivers/rtc/rtc-sd3078.c
+
 WIIMOTE HID DRIVER
 M:	David Herrmann <dh.herrmann@googlemail.com>
 L:	linux-input@vger.kernel.org
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index a819ef0..5b4b1b4 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -646,6 +646,15 @@ config RTC_DRV_S5M
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-s5m.
 
+config RTC_DRV_SD3078
+    tristate "ZXW Crystal SD3078"
+    help
+      If you say yes here you get support for the ZXW Crystal
+      SD3078 RTC chips.
+
+      This driver can also be built as a module. If so, the module
+      will be called rtc-sd3078.
+
 endif # I2C
 
 comment "SPI RTC drivers"
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 290c173..de9b670 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -176,3 +176,4 @@ obj-$(CONFIG_RTC_DRV_WM8350)	+= rtc-wm8350.o
 obj-$(CONFIG_RTC_DRV_X1205)	+= rtc-x1205.o
 obj-$(CONFIG_RTC_DRV_XGENE)	+= rtc-xgene.o
 obj-$(CONFIG_RTC_DRV_ZYNQMP)	+= rtc-zynqmp.o
+obj-$(CONFIG_RTC_DRV_SD3078)	+= rtc-sd3078.o
diff --git a/drivers/rtc/rtc-sd3078.c b/drivers/rtc/rtc-sd3078.c
new file mode 100644
index 0000000..bb24ba1
--- /dev/null
+++ b/drivers/rtc/rtc-sd3078.c
@@ -0,0 +1,300 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Real Time Clock (RTC) Driver for sd3078
+ * Copyright (C) 2018 Zoro Li
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/bcd.h>
+#include <linux/rtc.h>
+#include <linux/slab.h>
+
+#define SD3078_REG_SC			0x00
+#define SD3078_REG_MN			0x01
+#define SD3078_REG_HR			0x02
+#define SD3078_REG_DW			0x03
+#define SD3078_REG_DM			0x04
+#define SD3078_REG_MO			0x05
+#define SD3078_REG_YR			0x06
+
+#define SD3078_REG_CTRL1		0x0f
+#define SD3078_REG_CTRL2		0x10
+#define SD3078_REG_CTRL3		0x11
+
+#define KEY_WRITE1		0x80
+#define KEY_WRITE2		0x04
+#define KEY_WRITE3		0x80
+
+struct sd3078 {
+	struct rtc_device *rtc;
+};
+
+struct i2c_driver sd3078_driver;
+
+
+static int sd3078_i2c_read_regs(struct i2c_client *client,
+	unsigned char reg, unsigned char buf[], unsigned int len)
+{
+	struct i2c_adapter *adap = client->adapter;
+	unsigned char reg_buf = reg;
+	int ret;
+	struct i2c_msg msgs[] = {
+		{/* setup read ptr */
+			.addr = client->addr,
+			.len = 1,
+			.buf = &reg_buf
+		},
+		{/* read status + date */
+			.addr = client->addr,
+			.flags = I2C_M_RD,
+			.len = len,
+			.buf = buf
+		},
+	};
+
+	ret = i2c_transfer(adap, msgs, 2);
+	return (ret == 2) ? len : ret;
+}
+
+static int sd3078_i2c_write_reg(struct i2c_client *client,
+	unsigned char reg, unsigned char value)
+{
+	unsigned char data[2];
+	int ret;
+
+	data[0] = reg;
+	data[1] = value;
+	ret = i2c_master_send(client, data, 2);
+	return ret;
+}
+
+/*
+ * In order to prevent arbitrary modification of the time register,
+ * when modification of the register,
+ * the "write" bit needs to be written in a certain order.
+ * 1. set WRITE1 bit
+ * 2. set WRITE2 bit
+ * 1. set WRITE3 bit
+ */
+static void sd3078_enable_reg_write(struct i2c_client *client)
+{
+	unsigned char reg1, reg2;
+
+	sd3078_i2c_read_regs(client, SD3078_REG_CTRL1, &reg1, 1);
+	sd3078_i2c_read_regs(client, SD3078_REG_CTRL2, &reg2, 1);
+
+	reg2 |= KEY_WRITE1;
+	sd3078_i2c_write_reg(client, SD3078_REG_CTRL2, reg2);
+
+	reg1 |= KEY_WRITE2;
+	sd3078_i2c_write_reg(client, SD3078_REG_CTRL1, reg1);
+
+	reg1 |= KEY_WRITE3;
+	sd3078_i2c_write_reg(client, SD3078_REG_CTRL1, reg1);
+
+	sd3078_i2c_read_regs(client, SD3078_REG_CTRL1, &reg1, 1);
+	sd3078_i2c_read_regs(client, SD3078_REG_CTRL2, &reg2, 1);
+}
+
+/*
+ * In order to prevent arbitrary modification of the time register,
+ * we should disable the write function.
+ * when disable write,
+ * the "write" bit needs to be clear in a certain order.
+ * 1. clear WRITE2 bit
+ * 2. clear WRITE3 bit
+ * 3. clear WRITE1 bit
+ */
+static void sd3078_disable_reg_write(struct i2c_client *client)
+{
+	unsigned char reg1, reg2;
+
+	sd3078_i2c_read_regs(client, SD3078_REG_CTRL1, &reg1, 1);
+	sd3078_i2c_read_regs(client, SD3078_REG_CTRL2, &reg2, 1);
+
+	reg1 &= ~KEY_WRITE2;
+	sd3078_i2c_write_reg(client, SD3078_REG_CTRL1, reg1);
+
+	reg1 &= ~KEY_WRITE3;
+	sd3078_i2c_write_reg(client, SD3078_REG_CTRL1, reg1);
+
+	reg2 &= ~KEY_WRITE1;
+	sd3078_i2c_write_reg(client, SD3078_REG_CTRL2, reg2);
+
+	sd3078_i2c_read_regs(client, SD3078_REG_CTRL1, &reg1, 1);
+	sd3078_i2c_read_regs(client, SD3078_REG_CTRL2, &reg2, 1);
+}
+
+static int sd3078_get_datetime(struct i2c_client *client, struct rtc_time *tm)
+{
+	unsigned char buf[7] = {0};
+	unsigned char hour;
+
+	sd3078_i2c_read_regs(client, SD3078_REG_SC, buf, 7);
+
+	tm->tm_sec	= bcd2bin(buf[SD3078_REG_SC] & 0x7F);
+	tm->tm_min	= bcd2bin(buf[SD3078_REG_MN] & 0x7F);
+	hour = buf[SD3078_REG_HR];
+
+	if (hour & 0x80) /* 24H PM */
+		tm->tm_hour = bcd2bin(buf[SD3078_REG_HR] & 0x3F);
+	else if (hour & 0x20) /* 12H PM */
+		tm->tm_hour = bcd2bin(buf[SD3078_REG_HR] & 0x1F) + 12;
+	else /* 12H AM */
+		tm->tm_hour = bcd2bin(buf[SD3078_REG_HR] & 0x1F);
+
+	tm->tm_mday = bcd2bin(buf[SD3078_REG_DM] & 0x3F);
+	tm->tm_wday = buf[SD3078_REG_DW] & 0x07;
+	/* rtc mn 1-12 */
+	tm->tm_mon	= bcd2bin(buf[SD3078_REG_MO] & 0x1F) - 1;
+	tm->tm_year = bcd2bin(buf[SD3078_REG_YR])+100;
+
+	if (rtc_valid_tm(tm) < 0)
+		dev_err(&client->dev, "retrieved date/time is not valid.\n");
+
+	return 0;
+}
+
+static int sd3078_set_datetime(struct i2c_client *client, struct rtc_time *tm)
+{
+	int i, err;
+	unsigned char buf[9];
+
+	dev_dbg(&client->dev,
+		"%s: secs=%d, mins=%d, hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
+		__func__,
+		tm->tm_sec, tm->tm_min, tm->tm_hour,
+		tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+    /* hours, minutes and seconds */
+	buf[SD3078_REG_SC] = bin2bcd(tm->tm_sec);
+	buf[SD3078_REG_MN] = bin2bcd(tm->tm_min);
+	/* set 24H mode */
+	buf[SD3078_REG_HR] = bin2bcd(tm->tm_hour) | 0x80;
+
+	buf[SD3078_REG_DM] = bin2bcd(tm->tm_mday);
+
+    /* month, 1 - 12 */
+	buf[SD3078_REG_MO] = bin2bcd(tm->tm_mon) + 1;
+
+    /* year and century */
+	buf[SD3078_REG_YR] = bin2bcd(tm->tm_year % 100);
+	buf[SD3078_REG_DW] = tm->tm_wday & 0x07;
+
+	sd3078_enable_reg_write(client);
+
+    /* write register's data */
+	for (i = 0; i < 7; i++) {
+		err = sd3078_i2c_write_reg(client,
+			SD3078_REG_SC + i, buf[SD3078_REG_SC + i]);
+		if (err != 2)
+			return -EIO;
+	}
+
+	sd3078_disable_reg_write(client);
+
+	return 0;
+}
+
+
+#ifdef CONFIG_RTC_INTF_DEV
+static int sd3078_rtc_ioctl(struct device *dev,
+		unsigned int cmd, unsigned long arg)
+{
+	switch (cmd) {
+	default:
+		return -ENOIOCTLCMD;
+	}
+}
+#else
+#define sd3078_rtc_ioctl NULL
+#endif
+
+static int sd3078_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	return sd3078_get_datetime(to_i2c_client(dev), tm);
+}
+
+static int sd3078_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	return sd3078_set_datetime(to_i2c_client(dev), tm);
+}
+
+static const struct rtc_class_ops sd3078_rtc_ops = {
+	.ioctl		= sd3078_rtc_ioctl,
+	.read_time	= sd3078_rtc_read_time,
+	.set_time	= sd3078_rtc_set_time,
+};
+
+static int sd3078_probe(struct i2c_client *client,
+		const struct i2c_device_id *id)
+{
+	struct sd3078 *sd3078;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+		return -ENODEV;
+
+	sd3078 = devm_kzalloc(&client->dev, sizeof(*sd3078), GFP_KERNEL);
+	if (!sd3078)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, sd3078);
+
+	sd3078->rtc = devm_rtc_device_register(&client->dev,
+			sd3078_driver.driver.name,
+			&sd3078_rtc_ops, THIS_MODULE);
+
+	if (IS_ERR(sd3078->rtc))
+		return PTR_ERR(sd3078->rtc);
+
+	return 0;
+}
+
+static int sd3078_remove(struct i2c_client *client)
+{
+	return 0;
+}
+
+static const struct i2c_device_id sd3078_id[] = {
+	{"sd3078", 0},
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, sd3078_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id rtc_dt_ids[] = {
+	{ .compatible = "whwave,sd3078" },
+	{},
+};
+#endif
+
+struct i2c_driver sd3078_driver = {
+	.driver     = {
+		.name   = "sd3078",
+		.owner  = THIS_MODULE,
+#ifdef CONFIG_OF
+		.of_match_table = of_match_ptr(rtc_dt_ids),
+#endif
+	},
+	.probe      = sd3078_probe,
+	.remove     = sd3078_remove,
+	.id_table   = sd3078_id,
+};
+
+static int __init sd3078_init(void)
+{
+	return i2c_add_driver(&sd3078_driver);
+}
+
+static void __exit sd3078_exit(void)
+{
+	i2c_del_driver(&sd3078_driver);
+}
+
+module_init(sd3078_init);
+module_exit(sd3078_exit);
+
+MODULE_AUTHOR("Zoro Li <long17.cool@163.com>");
+MODULE_DESCRIPTION("SD3078 RTC driver");
+MODULE_LICENSE("GPL");
