[1/8] hw/avr: Add limited support for avr gpio registers

Add some of these features for AVR GPIO:

  - GPIO I/O : PORTx registers
  - Data Direction : DDRx registers
  - DDRx toggling : PINx registers

Following things are not supported yet:
  - MCUR registers

Signed-off-by: Heecheol Yang <heecheol.yang@outlook.com>
Reviewed-by: Michael Rolnik <mrolnik@gmail.com>
Message-Id: <DM6PR16MB247368DBD3447ABECDD795D7E6090@DM6PR16MB2473.namprd16.prod.outlook.com>
[PMD: Use AVR_GPIO_COUNT]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210313165445.2113938-4-f4bug@amsat.org>
---
 hw/avr/Kconfig             |   1 +
 hw/avr/atmega.c            |   7 +-
 hw/avr/atmega.h            |   2 +
 hw/gpio/Kconfig            |   3 +
 hw/gpio/avr_gpio.c         | 138 +++++++++++++++++++++++++++++++++++++
 hw/gpio/meson.build        |   1 +
 include/hw/gpio/avr_gpio.h |  53 ++++++++++++++
 7 files changed, 203 insertions(+), 2 deletions(-)
 create mode 100644 hw/gpio/avr_gpio.c
 create mode 100644 include/hw/gpio/avr_gpio.h

Hi all,

Is there any kind of web UI where I can review it?
I don't find this patch in https://patchew.org/  (there is only 2 year old
version (https://patchew.org/search?q=project%3AQEMU+%22hw%2Favr%22))

Thank you,
Michael Rolnik

On Mon, Sep 12, 2022 at 2:21 PM Heecheol Yang <heecheol.yang@outlook.com>
wrote:

> Add some of these features for AVR GPIO:
>
>   - GPIO I/O : PORTx registers
>   - Data Direction : DDRx registers
>   - DDRx toggling : PINx registers
>
> Following things are not supported yet:
>   - MCUR registers
>
> Signed-off-by: Heecheol Yang <heecheol.yang@outlook.com>
> Reviewed-by: Michael Rolnik <mrolnik@gmail.com>
> Message-Id: <
> DM6PR16MB247368DBD3447ABECDD795D7E6090@DM6PR16MB2473.namprd16.prod.outlook.com
> >
> [PMD: Use AVR_GPIO_COUNT]
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> Message-Id: <20210313165445.2113938-4-f4bug@amsat.org>
> ---
>  hw/avr/Kconfig             |   1 +
>  hw/avr/atmega.c            |   7 +-
>  hw/avr/atmega.h            |   2 +
>  hw/gpio/Kconfig            |   3 +
>  hw/gpio/avr_gpio.c         | 138 +++++++++++++++++++++++++++++++++++++
>  hw/gpio/meson.build        |   1 +
>  include/hw/gpio/avr_gpio.h |  53 ++++++++++++++
>  7 files changed, 203 insertions(+), 2 deletions(-)
>  create mode 100644 hw/gpio/avr_gpio.c
>  create mode 100644 include/hw/gpio/avr_gpio.h
>
> diff --git a/hw/avr/Kconfig b/hw/avr/Kconfig
> index d31298c3cc..16a57ced11 100644
> --- a/hw/avr/Kconfig
> +++ b/hw/avr/Kconfig
> @@ -3,6 +3,7 @@ config AVR_ATMEGA_MCU
>      select AVR_TIMER16
>      select AVR_USART
>      select AVR_POWER
> +    select AVR_GPIO
>
>  config ARDUINO
>      select AVR_ATMEGA_MCU
> diff --git a/hw/avr/atmega.c b/hw/avr/atmega.c
> index a34803e642..f5fb3a5225 100644
> --- a/hw/avr/atmega.c
> +++ b/hw/avr/atmega.c
> @@ -282,8 +282,11 @@ static void atmega_realize(DeviceState *dev, Error
> **errp)
>              continue;
>          }
>          devname = g_strdup_printf("atmega-gpio-%c", 'a' + (char)i);
> -        create_unimplemented_device(devname,
> -                                    OFFSET_DATA + mc->dev[idx].addr, 3);
> +        object_initialize_child(OBJECT(dev), devname, &s->gpio[i],
> +                                TYPE_AVR_GPIO);
> +        sysbus_realize(SYS_BUS_DEVICE(&s->gpio[i]), &error_abort);
> +        sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio[i]), 0,
> +                        OFFSET_DATA + mc->dev[idx].addr);
>          g_free(devname);
>      }
>
> diff --git a/hw/avr/atmega.h b/hw/avr/atmega.h
> index a99ee15c7e..e2289d5744 100644
> --- a/hw/avr/atmega.h
> +++ b/hw/avr/atmega.h
> @@ -13,6 +13,7 @@
>
>  #include "hw/char/avr_usart.h"
>  #include "hw/timer/avr_timer16.h"
> +#include "hw/gpio/avr_gpio.h"
>  #include "hw/misc/avr_power.h"
>  #include "target/avr/cpu.h"
>  #include "qom/object.h"
> @@ -44,6 +45,7 @@ struct AtmegaMcuState {
>      DeviceState *io;
>      AVRMaskState pwr[POWER_MAX];
>      AVRUsartState usart[USART_MAX];
> +    AVRGPIOState gpio[GPIO_MAX];
>      AVRTimer16State timer[TIMER_MAX];
>      uint64_t xtal_freq_hz;
>  };
> diff --git a/hw/gpio/Kconfig b/hw/gpio/Kconfig
> index f0e7405f6e..fde7019b2b 100644
> --- a/hw/gpio/Kconfig
> +++ b/hw/gpio/Kconfig
> @@ -13,3 +13,6 @@ config GPIO_PWR
>
>  config SIFIVE_GPIO
>      bool
> +
> +config AVR_GPIO
> +    bool
> diff --git a/hw/gpio/avr_gpio.c b/hw/gpio/avr_gpio.c
> new file mode 100644
> index 0000000000..cdb574ef0d
> --- /dev/null
> +++ b/hw/gpio/avr_gpio.c
> @@ -0,0 +1,138 @@
> +/*
> + * AVR processors GPIO registers emulation.
> + *
> + * Copyright (C) 2020 Heecheol Yang <heecheol.yang@outlook.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 or
> + * (at your option) version 3 of the License.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License along
> + * with this program; if not, see <http://www.gnu.org/licenses/>.
> + */
> +#include "qemu/osdep.h"
> +#include "qemu/log.h"
> +#include "qemu/module.h"
> +#include "qemu/osdep.h"
> +#include "qapi/error.h"
> +#include "hw/sysbus.h"
> +#include "hw/irq.h"
> +#include "hw/gpio/avr_gpio.h"
> +#include "hw/qdev-properties.h"
> +
> +static void avr_gpio_reset(DeviceState *dev)
> +{
> +    AVRGPIOState *gpio = AVR_GPIO(dev);
> +
> +    gpio->reg.pin = 0u;
> +    gpio->reg.ddr = 0u;
> +    gpio->reg.port = 0u;
> +}
> +
> +static void avr_gpio_write_port(AVRGPIOState *s, uint64_t value)
> +{
> +    uint8_t pin;
> +    uint8_t cur_port_val = s->reg.port;
> +    uint8_t cur_ddr_val = s->reg.ddr;
> +
> +    for (pin = 0u; pin < AVR_GPIO_COUNT ; pin++) {
> +        uint8_t cur_port_pin_val = cur_port_val & 0x01u;
> +        uint8_t cur_ddr_pin_val = cur_ddr_val & 0x01u;
> +        uint8_t new_port_pin_val = value & 0x01u;
> +
> +        if (cur_ddr_pin_val && (cur_port_pin_val != new_port_pin_val)) {
> +            qemu_set_irq(s->out[pin], new_port_pin_val);
> +        }
> +        cur_port_val >>= 1u;
> +        cur_ddr_val >>= 1u;
> +        value >>= 1u;
> +    }
> +    s->reg.port = value & s->reg.ddr;
> +}
> +static uint64_t avr_gpio_read(void *opaque, hwaddr offset, unsigned int
> size)
> +{
> +    AVRGPIOState *s = (AVRGPIOState *)opaque;
> +    switch (offset) {
> +    case GPIO_PIN:
> +        return s->reg.pin;
> +    case GPIO_DDR:
> +        return s->reg.ddr;
> +    case GPIO_PORT:
> +        return s->reg.port;
> +    default:
> +        g_assert_not_reached();
> +        break;
> +    }
> +    return 0;
> +}
> +
> +static void avr_gpio_write(void *opaque, hwaddr offset, uint64_t value,
> +                                unsigned int size)
> +{
> +    AVRGPIOState *s = (AVRGPIOState *)opaque;
> +    value = value & 0xF;
> +    switch (offset) {
> +    case GPIO_PIN:
> +        s->reg.pin = value;
> +        s->reg.port ^= s->reg.pin;
> +        break;
> +    case GPIO_DDR:
> +        s->reg.ddr = value;
> +        break;
> +    case GPIO_PORT:
> +        avr_gpio_write_port(s, value);
> +        break;
> +    default:
> +        g_assert_not_reached();
> +        break;
> +    }
> +}
> +
> +static const MemoryRegionOps avr_gpio_ops = {
> +    .read = avr_gpio_read,
> +    .write = avr_gpio_write,
> +    .endianness = DEVICE_NATIVE_ENDIAN,
> +};
> +
> +static void avr_gpio_init(Object *obj)
> +{
> +    AVRGPIOState *s = AVR_GPIO(obj);
> +
> +    qdev_init_gpio_out(DEVICE(obj), s->out, ARRAY_SIZE(s->out));
> +    memory_region_init_io(&s->mmio, obj, &avr_gpio_ops, s, TYPE_AVR_GPIO,
> 3);
> +    sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio);
> +}
> +static void avr_gpio_realize(DeviceState *dev, Error **errp)
> +{
> +    /* Do nothing currently */
> +}
> +
> +
> +static void avr_gpio_class_init(ObjectClass *klass, void *data)
> +{
> +    DeviceClass *dc = DEVICE_CLASS(klass);
> +
> +    dc->reset = avr_gpio_reset;
> +    dc->realize = avr_gpio_realize;
> +}
> +
> +static const TypeInfo avr_gpio_info = {
> +    .name          = TYPE_AVR_GPIO,
> +    .parent        = TYPE_SYS_BUS_DEVICE,
> +    .instance_size = sizeof(AVRGPIOState),
> +    .instance_init = avr_gpio_init,
> +    .class_init    = avr_gpio_class_init,
> +};
> +
> +static void avr_gpio_register_types(void)
> +{
> +    type_register_static(&avr_gpio_info);
> +}
> +
> +type_init(avr_gpio_register_types)
> diff --git a/hw/gpio/meson.build b/hw/gpio/meson.build
> index 7bd6a57264..ef372bdd3b 100644
> --- a/hw/gpio/meson.build
> +++ b/hw/gpio/meson.build
> @@ -12,3 +12,4 @@ softmmu_ss.add(when: 'CONFIG_OMAP', if_true:
> files('omap_gpio.c'))
>  softmmu_ss.add(when: 'CONFIG_RASPI', if_true: files('bcm2835_gpio.c'))
>  softmmu_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_gpio.c'))
>  softmmu_ss.add(when: 'CONFIG_SIFIVE_GPIO', if_true:
> files('sifive_gpio.c'))
> +softmmu_ss.add(when: 'CONFIG_AVR_GPIO', if_true: files('avr_gpio.c'))
> diff --git a/include/hw/gpio/avr_gpio.h b/include/hw/gpio/avr_gpio.h
> new file mode 100644
> index 0000000000..498a7275f0
> --- /dev/null
> +++ b/include/hw/gpio/avr_gpio.h
> @@ -0,0 +1,53 @@
> +/*
> + * AVR processors GPIO registers definition.
> + *
> + * Copyright (C) 2020 Heecheol Yang <heecheol.yang@outlook.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 or
> + * (at your option) version 3 of the License.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License along
> + * with this program; if not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef AVR_GPIO_H
> +#define AVR_GPIO_H
> +
> +#include "hw/sysbus.h"
> +#include "qom/object.h"
> +
> +/* Offsets of registers. */
> +#define GPIO_PIN   0x00
> +#define GPIO_DDR   0x01
> +#define GPIO_PORT  0x02
> +
> +#define TYPE_AVR_GPIO "avr-gpio"
> +OBJECT_DECLARE_SIMPLE_TYPE(AVRGPIOState, AVR_GPIO)
> +#define AVR_GPIO_COUNT 8
> +
> +struct AVRGPIOState {
> +    /*< private >*/
> +    SysBusDevice parent_obj;
> +
> +    /*< public >*/
> +    MemoryRegion mmio;
> +
> +    struct {
> +        uint8_t pin;
> +        uint8_t ddr;
> +        uint8_t port;
> +    } reg;
> +
> +    /* PORTx data changed IRQs */
> +    qemu_irq out[8u];
> +
> +};
> +
> +#endif /* AVR_GPIO_H */
> --
> 2.34.1
>
>

Sorry for your inconvenience.
There's something wrong on my patchwork.

I'll upload them again and share the link soon.


Thanks again.
Best regards

Heecheol yang