Message ID | 333629d951b3ac4308c88ac1a27be2ad0fff8642.1436138842.git.jcd@tribudubois.net |
---|---|
State | New |
Headers | show |
Needs a short paragraph. List out the initally support peripherals. On Sun, Jul 5, 2015 at 5:05 PM, Jean-Christophe Dubois <jcd@tribudubois.net> wrote: > Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> > --- > > Changes since v1: > * not present on v1 > > Changes since v2: > * not present on v2 > > Changes since v3: > * not present on v3 > > Changes since v4: > * not present on v4 > > Changes since v5: > * not present on v5 > > Changes since v6: > * not present on v6 > > Changes since v7: > * not present on v7 > > Changes since v8: > * use defines instead of hardcoded values for IRQ and ADDR > * Add i.MX31 SOC support > > Changes since v9: > * no change. > > default-configs/arm-softmmu.mak | 2 + > hw/arm/Makefile.objs | 1 + > hw/arm/fsl-imx31.c | 219 ++++++++++++++++++++++++++++++++++++++++ > include/hw/arm/fsl-imx31.h | 99 ++++++++++++++++++ > 4 files changed, 321 insertions(+) > create mode 100644 hw/arm/fsl-imx31.c > create mode 100644 include/hw/arm/fsl-imx31.h > > diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak > index 74f1db3..3f86e7e 100644 > --- a/default-configs/arm-softmmu.mak > +++ b/default-configs/arm-softmmu.mak > @@ -98,6 +98,8 @@ CONFIG_ALLWINNER_A10_PIT=y > CONFIG_ALLWINNER_A10_PIC=y > CONFIG_ALLWINNER_A10=y > > +CONFIG_FSL_IMX31=y > + > CONFIG_XIO3130=y > CONFIG_IOH3420=y > CONFIG_I82801B11=y > diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs > index cf346c1..f35f731 100644 > --- a/hw/arm/Makefile.objs > +++ b/hw/arm/Makefile.objs > @@ -13,3 +13,4 @@ obj-y += omap1.o omap2.o strongarm.o > obj-$(CONFIG_ALLWINNER_A10) += allwinner-a10.o cubieboard.o > obj-$(CONFIG_STM32F205_SOC) += stm32f205_soc.o > obj-$(CONFIG_XLNX_ZYNQMP) += xlnx-zynqmp.o xlnx-ep108.o > +obj-$(CONFIG_FSL_IMX31) += fsl-imx31.o > diff --git a/hw/arm/fsl-imx31.c b/hw/arm/fsl-imx31.c > new file mode 100644 > index 0000000..809070b > --- /dev/null > +++ b/hw/arm/fsl-imx31.c > @@ -0,0 +1,219 @@ > +/* > + * Copyright (c) 2013 Jean-Christophe Dubois <jcd@tribudubois.net> > + * > + * i.MX31 SOC emulation. > + * > + * Based on hw/arm/fsl-imx31.c > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms of the GNU General Public License as published by the > + * Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, but WITHOUT > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License > + * for more details. > + * > + * You should have received a copy of the GNU General Public License along > + * with this program; if not, see <http://www.gnu.org/licenses/>. > + */ > + > +#include "hw/arm/fsl-imx31.h" > +#include "sysemu/sysemu.h" > +#include "exec/address-spaces.h" > + > +static void fsl_imx31_init(Object *obj) > +{ > + FslImx31State *s = FSL_IMX31(obj); > + int i; > + > + object_initialize(&s->cpu, sizeof(s->cpu), "arm1136-" TYPE_ARM_CPU); > + > + object_initialize(&s->avic, sizeof(s->avic), TYPE_IMX_AVIC); > + qdev_set_parent_bus(DEVICE(&s->avic), sysbus_get_default()); > + > + object_initialize(&s->ccm, sizeof(s->ccm), TYPE_IMX_CCM); > + qdev_set_parent_bus(DEVICE(&s->ccm), sysbus_get_default()); > + > + for (i = 0; i < FSL_IMX31_NUM_UARTS; i++) { > + if (i >= MAX_SERIAL_PORTS) { > + break; > + } You don't need this bail-out. For SoCs, the device should always be created. If QEMU can't attach the serial port to anything that is ok. If the UART model can't handle being un-attached (chr == NULL) it should be patched (but thats out of scope for the moment I think). > + object_initialize(&s->uart[i], sizeof(s->uart[i]), TYPE_IMX_SERIAL); > + qdev_set_parent_bus(DEVICE(&s->uart[i]), sysbus_get_default()); > + } > + > + for (i = 0; i < FSL_IMX31_NUM_GPTS; i++) { > + object_initialize(&s->gpt[i], sizeof(s->gpt[i]), TYPE_IMX_GPT); > + qdev_set_parent_bus(DEVICE(&s->gpt[i]), sysbus_get_default()); > + } > + > + for (i = 0; i < FSL_IMX31_NUM_EPITS; i++) { > + object_initialize(&s->epit[i], sizeof(s->epit[i]), TYPE_IMX_EPIT); > + qdev_set_parent_bus(DEVICE(&s->epit[i]), sysbus_get_default()); > + } > +} > + > +static void fsl_imx31_realize(DeviceState *dev, Error **errp) > +{ > + FslImx31State *s = FSL_IMX31(dev); > + uint16_t i; > + Error *err = NULL; > + > + /* Initialize the CPU */ Self documented, drop comment. > + object_property_set_bool(OBJECT(&s->cpu), true, "realized", &err); > + if (err) { > + error_propagate((errp), (err)); parentheses not needed (x2). Happens a few times below as well. > + return; > + } > + > + /* Initialize the PIC */ What is PIC? I would just say 'interrupt controller" (if you are going for programmable-interrupt-controller) or drop the comment. > + object_property_set_bool(OBJECT(&s->avic), true, "realized", &err); > + if (err) { > + error_propagate((errp), (err)); > + return; > + } > + /* Connect the PIC interrupt to the CPU */ "interrupts" (you have both IRQ and FIQ). This comment... > + sysbus_mmio_map(SYS_BUS_DEVICE(&s->avic), 0, FSL_IMX31_AVIC_ADDR); ... goes here. Or just drop it. It is self documented. > + sysbus_connect_irq(SYS_BUS_DEVICE(&s->avic), 0, > + qdev_get_gpio_in(DEVICE(&s->cpu), ARM_CPU_IRQ)); > + sysbus_connect_irq(SYS_BUS_DEVICE(&s->avic), 1, > + qdev_get_gpio_in(DEVICE(&s->cpu), ARM_CPU_FIQ)); > + > + /* Initialize the CCM */ > + object_property_set_bool(OBJECT(&s->ccm), true, "realized", &err); > + if (err) { > + error_propagate((errp), (err)); > + return; > + } > + /* Map CCM memory */ > + sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccm), 0, 0x53f80000); Missed address macroification. > + > + /* Initialize all UARTS */ > + for (i = 0; i < FSL_IMX31_NUM_UARTS; i++) { > + static const struct { > + hwaddr addr; > + unsigned int irq; > + } serial_table[FSL_IMX31_NUM_UARTS] = { > + { FSL_IMX31_UART1_ADDR, FSL_IMX31_UART1_IRQ }, > + { FSL_IMX31_UART2_ADDR, FSL_IMX31_UART2_IRQ }, > + }; > + > + /* Bail out if we exeeded Qemu UART count */ "exceeded" "QEMU" > + if (i >= MAX_SERIAL_PORTS) { > + break; > + } Is this where the chr property should be set? > + /* Initialize the UART */ > + object_property_set_bool(OBJECT(&s->uart[i]), true, "realized", &err); > + if (err) { > + error_propagate((errp), (err)); > + return; > + } > + /* Map UART memory */ Self-documented - drop comment. > + sysbus_mmio_map(SYS_BUS_DEVICE(&s->uart[i]), 0, serial_table[i].addr); > + /* Connet UART IRQ to PIC */ Self-documented - drop comment. > + sysbus_connect_irq(SYS_BUS_DEVICE(&s->uart[i]), 0, > + qdev_get_gpio_in(DEVICE(&s->avic), > + serial_table[i].irq)); I'd pull the GPIO in to a local variable to save on the double 80 char wrap of mixed indents. > + } > + > + /* Initialize all GPT timers */ > + for (i = 0; i < FSL_IMX31_NUM_GPTS; i++) { > + static const struct { > + hwaddr addr; > + unsigned int irq; > + } gpt_table[FSL_IMX31_NUM_GPTS] = { > + { FSL_IMX31_GPT_ADDR, FSL_IMX31_GPT_IRQ } > + }; > + > + s->gpt[i].ccm = DEVICE(&s->ccm); > + We should consider making this a QOM link, but is out of scope of series so no change needed. > + /* Initialize the GPT */ > + object_property_set_bool(OBJECT(&s->gpt[i]), true, "realized", &err); > + if (err) { > + error_propagate((errp), (err)); > + return; > + } > + /* Map GPT memory */ Self-documented - drop comment. > + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpt[i]), 0, gpt_table[i].addr); > + /* Connet GPT IRQ to PIC */ Self-documented - drop comment. > + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpt[i]), 0, > + qdev_get_gpio_in(DEVICE(&s->avic), > + gpt_table[i].irq)); > + } > + > + /* Initialize all EPIT timers */ Self-documented - drop comment. > + for (i = 0; i < FSL_IMX31_NUM_EPITS; i++) { > + static const struct { > + hwaddr addr; > + unsigned int irq; > + } epit_table[FSL_IMX31_NUM_EPITS] = { > + { FSL_IMX31_EPIT1_ADDR, FSL_IMX31_EPIT1_IRQ }, > + { FSL_IMX31_EPIT2_ADDR, FSL_IMX31_EPIT2_IRQ }, > + }; > + > + s->epit[i].ccm = DEVICE(&s->ccm); > + > + /* Initialize the EPIT */ Self-documented - drop comment. > + object_property_set_bool(OBJECT(&s->epit[i]), true, "realized", &err); > + if (err) { > + error_propagate((errp), (err)); > + return; > + } > + /* Map EPIT memory */ Self-documented - drop comment. > + sysbus_mmio_map(SYS_BUS_DEVICE(&s->epit[i]), 0, epit_table[i].addr); > + /* Connet EPIT IRQ to PIC */ > + sysbus_connect_irq(SYS_BUS_DEVICE(&s->epit[i]), 0, > + qdev_get_gpio_in(DEVICE(&s->avic), > + epit_table[i].irq)); > + } > + > + /* On a real system, the first 16k is a `secure boot rom' */ > + memory_region_init_rom_device(&s->secure_rom, NULL, NULL, NULL, > + "imx31.secure_rom", > + FSL_IMX31_SECURE_ROM_SIZE, &err); > + memory_region_add_subregion(get_system_memory(), FSL_IMX31_SECURE_ROM_ADDR, > + &s->secure_rom); > + > + /* There is also a 16k ROM */ > + memory_region_init_rom_device(&s->rom, NULL, NULL, NULL, "imx31.rom", > + FSL_IMX31_ROM_SIZE, &err); > + memory_region_add_subregion(get_system_memory(), FSL_IMX31_ROM_ADDR, > + &s->rom); > + > + /* initialize internal RAM (16 KB) */ > + memory_region_init_ram(&s->iram, NULL, "imx31.iram", FSL_IMX31_IRAM_SIZE, > + &error_abort); > + vmstate_register_ram_global(&s->iram); > + memory_region_add_subregion(get_system_memory(), FSL_IMX31_IRAM_ADDR, > + &s->iram); I think there is a new feature for this, memory_region_allocate_system_memory. Check xlnx-ep108. > + > + /* internal RAM (16 KB) is aliased over 256 MB - 16 KB */ > + memory_region_init_alias(&s->iram_alias, NULL, "imx31.iram_alias", > + &s->iram, 0, FSL_IMX31_IRAM_ALIAS_SIZE); > + memory_region_add_subregion(get_system_memory(), FSL_IMX31_IRAM_ALIAS_ADDR, > + &s->iram_alias); > +} > + > +static void fsl_imx31_class_init(ObjectClass *oc, void *data) > +{ > + DeviceClass *dc = DEVICE_CLASS(oc); > + > + dc->realize = fsl_imx31_realize; > +} > + > +static const TypeInfo fsl_imx31_type_info = { > + .name = TYPE_FSL_IMX31, > + .parent = TYPE_DEVICE, > + .instance_size = sizeof(FslImx31State), > + .instance_init = fsl_imx31_init, > + .class_init = fsl_imx31_class_init, > +}; > + > +static void fsl_imx31_register_types(void) > +{ > + type_register_static(&fsl_imx31_type_info); > +} > + > +type_init(fsl_imx31_register_types) > diff --git a/include/hw/arm/fsl-imx31.h b/include/hw/arm/fsl-imx31.h > new file mode 100644 > index 0000000..f1bb299 > --- /dev/null > +++ b/include/hw/arm/fsl-imx31.h > @@ -0,0 +1,99 @@ > +/* > + * Freescale i.MX31 SoC emulation > + * > + * Copyright (C) 2015 Jean-Christophe Dubois <jcd@tribudubois.net> > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms of the GNU General Public License as published by the > + * Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, but WITHOUT > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License > + * for more details. > + */ > + > +#ifndef FSL_IMX31_H > +#define FSL_IMX31_H > + > +#include "hw/arm/arm.h" > +#include "hw/intc/imx_avic.h" > +#include "hw/misc/imx_ccm.h" > +#include "hw/char/imx_serial.h" > +#include "hw/timer/imx_gpt.h" > +#include "hw/timer/imx_epit.h" > +#include "exec/memory.h" > + > +#define TYPE_FSL_IMX31 "fsl,imx31" > +#define FSL_IMX31(obj) OBJECT_CHECK(FslImx31State, (obj), TYPE_FSL_IMX31) > + > +#define FSL_IMX31_NUM_UARTS 2 > +#define FSL_IMX31_NUM_GPTS 1 Can/should we de-arrayify a singleton device? Are you planning code share with more SoCs that may have multiple of these? > +#define FSL_IMX31_NUM_EPITS 2 > + > +typedef struct { > + /*< private >*/ > + DeviceState parent_obj; > + > + /*< public >*/ > + ARMCPU cpu; > + IMXAVICState avic; > + IMXCCMState ccm; > + IMXSerialState uart[FSL_IMX31_NUM_UARTS]; > + IMXGPTState gpt[FSL_IMX31_NUM_GPTS]; > + IMXEPITState epit[FSL_IMX31_NUM_EPITS]; > + MemoryRegion secure_rom; > + MemoryRegion rom; > + MemoryRegion iram; > + MemoryRegion iram_alias; > +} FslImx31State; FslIMX21State > + > +#define FSL_IMX31_SECURE_ROM_ADDR 0x00000000 > +#define FSL_IMX31_SECURE_ROM_SIZE 0x4000 > +#define FSL_IMX31_ROM_ADDR 0x00404000 > +#define FSL_IMX31_ROM_SIZE 0x4000 > +#define FSL_IMX31_IRAM_ALIAS_ADDR 0x10000000 > +#define FSL_IMX31_IRAM_ALIAS_SIZE 0xFFC0000 > +#define FSL_IMX31_IRAM_ADDR 0x1FFFC000 > +#define FSL_IMX31_IRAM_SIZE 0x4000 > +#define FSL_IMX31_UART1_ADDR 0x43F90000 > +#define FSL_IMX31_UART1_SIZE 0x4000 > +#define FSL_IMX31_UART2_ADDR 0x43F94000 > +#define FSL_IMX31_UART2_SIZE 0x4000 > +#define FSL_IMX31_CCM_ADDR 0x53F80000 > +#define FSL_IMX31_CCM_SIZE 0x4000 > +#define FSL_IMX31_GPT_ADDR 0x53F90000 > +#define FSL_IMX31_GPT_SIZE 0x4000 > +#define FSL_IMX31_EPIT1_ADDR 0x53F94000 > +#define FSL_IMX31_EPIT1_SIZE 0x4000 > +#define FSL_IMX31_EPIT2_ADDR 0x53F98000 > +#define FSL_IMX31_EPIT2_SIZE 0x4000 > +#define FSL_IMX31_AVIC_ADDR 0x68000000 > +#define FSL_IMX31_AVIC_SIZE 0x100 > +#define FSL_IMX31_SDRAM0_ADDR 0x80000000 > +#define FSL_IMX31_SDRAM0_SIZE 0x10000000 > +#define FSL_IMX31_SDRAM1_ADDR 0x90000000 > +#define FSL_IMX31_SDRAM1_SIZE 0x10000000 > +#define FSL_IMX31_FLASH0_ADDR 0xA0000000 > +#define FSL_IMX31_FLASH0_SIZE 0x8000000 > +#define FSL_IMX31_FLASH1_ADDR 0xA8000000 > +#define FSL_IMX31_FLASH1_SIZE 0x8000000 > +#define FSL_IMX31_CS2_ADDR 0xB0000000 > +#define FSL_IMX31_CS2_SIZE 0x2000000 > +#define FSL_IMX31_CS3_ADDR 0xB2000000 > +#define FSL_IMX31_CS3_SIZE 0x2000000 > +#define FSL_IMX31_CS4_ADDR 0xB4000000 > +#define FSL_IMX31_CS4_SIZE 0x2000000 > +#define FSL_IMX31_CS5_ADDR 0xB6000000 > +#define FSL_IMX31_CS5_SIZE 0x2000000 > +#define FSL_IMX31_NAND_ADDR 0xB8000000 > +#define FSL_IMX31_NAND_SIZE 0x1000 > + > +#define FSL_IMX31_EPIT2_IRQ 27 > +#define FSL_IMX31_EPIT1_IRQ 28 > +#define FSL_IMX31_GPT_IRQ 29 > +#define FSL_IMX31_UART2_IRQ 32 > +#define FSL_IMX31_UART1_IRQ 45 > + FWIW, I prefered these memory maps in the C file to minimise the header to just the embeddable state, but it could go either way. You could in-theory use these macros from the header to drive SoC-level tests I guess. No change needed. > +#endif // FSL_IMX31_H C++ style comment Regards, Peter > -- > 2.1.4 > >
diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak index 74f1db3..3f86e7e 100644 --- a/default-configs/arm-softmmu.mak +++ b/default-configs/arm-softmmu.mak @@ -98,6 +98,8 @@ CONFIG_ALLWINNER_A10_PIT=y CONFIG_ALLWINNER_A10_PIC=y CONFIG_ALLWINNER_A10=y +CONFIG_FSL_IMX31=y + CONFIG_XIO3130=y CONFIG_IOH3420=y CONFIG_I82801B11=y diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs index cf346c1..f35f731 100644 --- a/hw/arm/Makefile.objs +++ b/hw/arm/Makefile.objs @@ -13,3 +13,4 @@ obj-y += omap1.o omap2.o strongarm.o obj-$(CONFIG_ALLWINNER_A10) += allwinner-a10.o cubieboard.o obj-$(CONFIG_STM32F205_SOC) += stm32f205_soc.o obj-$(CONFIG_XLNX_ZYNQMP) += xlnx-zynqmp.o xlnx-ep108.o +obj-$(CONFIG_FSL_IMX31) += fsl-imx31.o diff --git a/hw/arm/fsl-imx31.c b/hw/arm/fsl-imx31.c new file mode 100644 index 0000000..809070b --- /dev/null +++ b/hw/arm/fsl-imx31.c @@ -0,0 +1,219 @@ +/* + * Copyright (c) 2013 Jean-Christophe Dubois <jcd@tribudubois.net> + * + * i.MX31 SOC emulation. + * + * Based on hw/arm/fsl-imx31.c + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#include "hw/arm/fsl-imx31.h" +#include "sysemu/sysemu.h" +#include "exec/address-spaces.h" + +static void fsl_imx31_init(Object *obj) +{ + FslImx31State *s = FSL_IMX31(obj); + int i; + + object_initialize(&s->cpu, sizeof(s->cpu), "arm1136-" TYPE_ARM_CPU); + + object_initialize(&s->avic, sizeof(s->avic), TYPE_IMX_AVIC); + qdev_set_parent_bus(DEVICE(&s->avic), sysbus_get_default()); + + object_initialize(&s->ccm, sizeof(s->ccm), TYPE_IMX_CCM); + qdev_set_parent_bus(DEVICE(&s->ccm), sysbus_get_default()); + + for (i = 0; i < FSL_IMX31_NUM_UARTS; i++) { + if (i >= MAX_SERIAL_PORTS) { + break; + } + object_initialize(&s->uart[i], sizeof(s->uart[i]), TYPE_IMX_SERIAL); + qdev_set_parent_bus(DEVICE(&s->uart[i]), sysbus_get_default()); + } + + for (i = 0; i < FSL_IMX31_NUM_GPTS; i++) { + object_initialize(&s->gpt[i], sizeof(s->gpt[i]), TYPE_IMX_GPT); + qdev_set_parent_bus(DEVICE(&s->gpt[i]), sysbus_get_default()); + } + + for (i = 0; i < FSL_IMX31_NUM_EPITS; i++) { + object_initialize(&s->epit[i], sizeof(s->epit[i]), TYPE_IMX_EPIT); + qdev_set_parent_bus(DEVICE(&s->epit[i]), sysbus_get_default()); + } +} + +static void fsl_imx31_realize(DeviceState *dev, Error **errp) +{ + FslImx31State *s = FSL_IMX31(dev); + uint16_t i; + Error *err = NULL; + + /* Initialize the CPU */ + object_property_set_bool(OBJECT(&s->cpu), true, "realized", &err); + if (err) { + error_propagate((errp), (err)); + return; + } + + /* Initialize the PIC */ + object_property_set_bool(OBJECT(&s->avic), true, "realized", &err); + if (err) { + error_propagate((errp), (err)); + return; + } + /* Connect the PIC interrupt to the CPU */ + sysbus_mmio_map(SYS_BUS_DEVICE(&s->avic), 0, FSL_IMX31_AVIC_ADDR); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->avic), 0, + qdev_get_gpio_in(DEVICE(&s->cpu), ARM_CPU_IRQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->avic), 1, + qdev_get_gpio_in(DEVICE(&s->cpu), ARM_CPU_FIQ)); + + /* Initialize the CCM */ + object_property_set_bool(OBJECT(&s->ccm), true, "realized", &err); + if (err) { + error_propagate((errp), (err)); + return; + } + /* Map CCM memory */ + sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccm), 0, 0x53f80000); + + /* Initialize all UARTS */ + for (i = 0; i < FSL_IMX31_NUM_UARTS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } serial_table[FSL_IMX31_NUM_UARTS] = { + { FSL_IMX31_UART1_ADDR, FSL_IMX31_UART1_IRQ }, + { FSL_IMX31_UART2_ADDR, FSL_IMX31_UART2_IRQ }, + }; + + /* Bail out if we exeeded Qemu UART count */ + if (i >= MAX_SERIAL_PORTS) { + break; + } + /* Initialize the UART */ + object_property_set_bool(OBJECT(&s->uart[i]), true, "realized", &err); + if (err) { + error_propagate((errp), (err)); + return; + } + /* Map UART memory */ + sysbus_mmio_map(SYS_BUS_DEVICE(&s->uart[i]), 0, serial_table[i].addr); + /* Connet UART IRQ to PIC */ + sysbus_connect_irq(SYS_BUS_DEVICE(&s->uart[i]), 0, + qdev_get_gpio_in(DEVICE(&s->avic), + serial_table[i].irq)); + } + + /* Initialize all GPT timers */ + for (i = 0; i < FSL_IMX31_NUM_GPTS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } gpt_table[FSL_IMX31_NUM_GPTS] = { + { FSL_IMX31_GPT_ADDR, FSL_IMX31_GPT_IRQ } + }; + + s->gpt[i].ccm = DEVICE(&s->ccm); + + /* Initialize the GPT */ + object_property_set_bool(OBJECT(&s->gpt[i]), true, "realized", &err); + if (err) { + error_propagate((errp), (err)); + return; + } + /* Map GPT memory */ + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpt[i]), 0, gpt_table[i].addr); + /* Connet GPT IRQ to PIC */ + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpt[i]), 0, + qdev_get_gpio_in(DEVICE(&s->avic), + gpt_table[i].irq)); + } + + /* Initialize all EPIT timers */ + for (i = 0; i < FSL_IMX31_NUM_EPITS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } epit_table[FSL_IMX31_NUM_EPITS] = { + { FSL_IMX31_EPIT1_ADDR, FSL_IMX31_EPIT1_IRQ }, + { FSL_IMX31_EPIT2_ADDR, FSL_IMX31_EPIT2_IRQ }, + }; + + s->epit[i].ccm = DEVICE(&s->ccm); + + /* Initialize the EPIT */ + object_property_set_bool(OBJECT(&s->epit[i]), true, "realized", &err); + if (err) { + error_propagate((errp), (err)); + return; + } + /* Map EPIT memory */ + sysbus_mmio_map(SYS_BUS_DEVICE(&s->epit[i]), 0, epit_table[i].addr); + /* Connet EPIT IRQ to PIC */ + sysbus_connect_irq(SYS_BUS_DEVICE(&s->epit[i]), 0, + qdev_get_gpio_in(DEVICE(&s->avic), + epit_table[i].irq)); + } + + /* On a real system, the first 16k is a `secure boot rom' */ + memory_region_init_rom_device(&s->secure_rom, NULL, NULL, NULL, + "imx31.secure_rom", + FSL_IMX31_SECURE_ROM_SIZE, &err); + memory_region_add_subregion(get_system_memory(), FSL_IMX31_SECURE_ROM_ADDR, + &s->secure_rom); + + /* There is also a 16k ROM */ + memory_region_init_rom_device(&s->rom, NULL, NULL, NULL, "imx31.rom", + FSL_IMX31_ROM_SIZE, &err); + memory_region_add_subregion(get_system_memory(), FSL_IMX31_ROM_ADDR, + &s->rom); + + /* initialize internal RAM (16 KB) */ + memory_region_init_ram(&s->iram, NULL, "imx31.iram", FSL_IMX31_IRAM_SIZE, + &error_abort); + vmstate_register_ram_global(&s->iram); + memory_region_add_subregion(get_system_memory(), FSL_IMX31_IRAM_ADDR, + &s->iram); + + /* internal RAM (16 KB) is aliased over 256 MB - 16 KB */ + memory_region_init_alias(&s->iram_alias, NULL, "imx31.iram_alias", + &s->iram, 0, FSL_IMX31_IRAM_ALIAS_SIZE); + memory_region_add_subregion(get_system_memory(), FSL_IMX31_IRAM_ALIAS_ADDR, + &s->iram_alias); +} + +static void fsl_imx31_class_init(ObjectClass *oc, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(oc); + + dc->realize = fsl_imx31_realize; +} + +static const TypeInfo fsl_imx31_type_info = { + .name = TYPE_FSL_IMX31, + .parent = TYPE_DEVICE, + .instance_size = sizeof(FslImx31State), + .instance_init = fsl_imx31_init, + .class_init = fsl_imx31_class_init, +}; + +static void fsl_imx31_register_types(void) +{ + type_register_static(&fsl_imx31_type_info); +} + +type_init(fsl_imx31_register_types) diff --git a/include/hw/arm/fsl-imx31.h b/include/hw/arm/fsl-imx31.h new file mode 100644 index 0000000..f1bb299 --- /dev/null +++ b/include/hw/arm/fsl-imx31.h @@ -0,0 +1,99 @@ +/* + * Freescale i.MX31 SoC emulation + * + * Copyright (C) 2015 Jean-Christophe Dubois <jcd@tribudubois.net> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#ifndef FSL_IMX31_H +#define FSL_IMX31_H + +#include "hw/arm/arm.h" +#include "hw/intc/imx_avic.h" +#include "hw/misc/imx_ccm.h" +#include "hw/char/imx_serial.h" +#include "hw/timer/imx_gpt.h" +#include "hw/timer/imx_epit.h" +#include "exec/memory.h" + +#define TYPE_FSL_IMX31 "fsl,imx31" +#define FSL_IMX31(obj) OBJECT_CHECK(FslImx31State, (obj), TYPE_FSL_IMX31) + +#define FSL_IMX31_NUM_UARTS 2 +#define FSL_IMX31_NUM_GPTS 1 +#define FSL_IMX31_NUM_EPITS 2 + +typedef struct { + /*< private >*/ + DeviceState parent_obj; + + /*< public >*/ + ARMCPU cpu; + IMXAVICState avic; + IMXCCMState ccm; + IMXSerialState uart[FSL_IMX31_NUM_UARTS]; + IMXGPTState gpt[FSL_IMX31_NUM_GPTS]; + IMXEPITState epit[FSL_IMX31_NUM_EPITS]; + MemoryRegion secure_rom; + MemoryRegion rom; + MemoryRegion iram; + MemoryRegion iram_alias; +} FslImx31State; + +#define FSL_IMX31_SECURE_ROM_ADDR 0x00000000 +#define FSL_IMX31_SECURE_ROM_SIZE 0x4000 +#define FSL_IMX31_ROM_ADDR 0x00404000 +#define FSL_IMX31_ROM_SIZE 0x4000 +#define FSL_IMX31_IRAM_ALIAS_ADDR 0x10000000 +#define FSL_IMX31_IRAM_ALIAS_SIZE 0xFFC0000 +#define FSL_IMX31_IRAM_ADDR 0x1FFFC000 +#define FSL_IMX31_IRAM_SIZE 0x4000 +#define FSL_IMX31_UART1_ADDR 0x43F90000 +#define FSL_IMX31_UART1_SIZE 0x4000 +#define FSL_IMX31_UART2_ADDR 0x43F94000 +#define FSL_IMX31_UART2_SIZE 0x4000 +#define FSL_IMX31_CCM_ADDR 0x53F80000 +#define FSL_IMX31_CCM_SIZE 0x4000 +#define FSL_IMX31_GPT_ADDR 0x53F90000 +#define FSL_IMX31_GPT_SIZE 0x4000 +#define FSL_IMX31_EPIT1_ADDR 0x53F94000 +#define FSL_IMX31_EPIT1_SIZE 0x4000 +#define FSL_IMX31_EPIT2_ADDR 0x53F98000 +#define FSL_IMX31_EPIT2_SIZE 0x4000 +#define FSL_IMX31_AVIC_ADDR 0x68000000 +#define FSL_IMX31_AVIC_SIZE 0x100 +#define FSL_IMX31_SDRAM0_ADDR 0x80000000 +#define FSL_IMX31_SDRAM0_SIZE 0x10000000 +#define FSL_IMX31_SDRAM1_ADDR 0x90000000 +#define FSL_IMX31_SDRAM1_SIZE 0x10000000 +#define FSL_IMX31_FLASH0_ADDR 0xA0000000 +#define FSL_IMX31_FLASH0_SIZE 0x8000000 +#define FSL_IMX31_FLASH1_ADDR 0xA8000000 +#define FSL_IMX31_FLASH1_SIZE 0x8000000 +#define FSL_IMX31_CS2_ADDR 0xB0000000 +#define FSL_IMX31_CS2_SIZE 0x2000000 +#define FSL_IMX31_CS3_ADDR 0xB2000000 +#define FSL_IMX31_CS3_SIZE 0x2000000 +#define FSL_IMX31_CS4_ADDR 0xB4000000 +#define FSL_IMX31_CS4_SIZE 0x2000000 +#define FSL_IMX31_CS5_ADDR 0xB6000000 +#define FSL_IMX31_CS5_SIZE 0x2000000 +#define FSL_IMX31_NAND_ADDR 0xB8000000 +#define FSL_IMX31_NAND_SIZE 0x1000 + +#define FSL_IMX31_EPIT2_IRQ 27 +#define FSL_IMX31_EPIT1_IRQ 28 +#define FSL_IMX31_GPT_IRQ 29 +#define FSL_IMX31_UART2_IRQ 32 +#define FSL_IMX31_UART1_IRQ 45 + +#endif // FSL_IMX31_H
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> --- Changes since v1: * not present on v1 Changes since v2: * not present on v2 Changes since v3: * not present on v3 Changes since v4: * not present on v4 Changes since v5: * not present on v5 Changes since v6: * not present on v6 Changes since v7: * not present on v7 Changes since v8: * use defines instead of hardcoded values for IRQ and ADDR * Add i.MX31 SOC support Changes since v9: * no change. default-configs/arm-softmmu.mak | 2 + hw/arm/Makefile.objs | 1 + hw/arm/fsl-imx31.c | 219 ++++++++++++++++++++++++++++++++++++++++ include/hw/arm/fsl-imx31.h | 99 ++++++++++++++++++ 4 files changed, 321 insertions(+) create mode 100644 hw/arm/fsl-imx31.c create mode 100644 include/hw/arm/fsl-imx31.h