@@ -38,7 +38,7 @@ static void fsl_imx25_init(Object *obj)
object_initialize(&s->avic, sizeof(s->avic), TYPE_IMX_AVIC);
qdev_set_parent_bus(DEVICE(&s->avic), sysbus_get_default());
- object_initialize(&s->ccm, sizeof(s->ccm), TYPE_IMX31_CCM);
+ object_initialize(&s->ccm, sizeof(s->ccm), TYPE_IMX25_CCM);
qdev_set_parent_bus(DEVICE(&s->ccm), sysbus_get_default());
for (i = 0; i < FSL_IMX25_NUM_UARTS; i++) {
@@ -27,6 +27,7 @@ obj-$(CONFIG_ECCMEMCTL) += eccmemctl.o
obj-$(CONFIG_EXYNOS4) += exynos4210_pmu.o
obj-$(CONFIG_IMX) += imx_ccm.o
obj-$(CONFIG_IMX) += imx31_ccm.o
+obj-$(CONFIG_IMX) += imx25_ccm.o
obj-$(CONFIG_MILKYMIST) += milkymist-hpdmc.o
obj-$(CONFIG_MILKYMIST) += milkymist-pfpu.o
obj-$(CONFIG_MAINSTONE) += mst_fpga.o
new file mode 100644
@@ -0,0 +1,341 @@
+/*
+ * IMX25 Clock Control Module
+ *
+ * Copyright (C) 2012 NICTA
+ * Updated by Jean-Christophe Dubois <jcd@tribudubois.net>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ * To get the timer frequencies right, we need to emulate at least part of
+ * the CCM.
+ */
+
+#include "hw/misc/imx25_ccm.h"
+
+#ifndef DEBUG_IMX25_CCM
+#define DEBUG_IMX25_CCM 0
+#endif
+
+#define DPRINTF(fmt, args...) \
+ do { \
+ if (DEBUG_IMX25_CCM) { \
+ fprintf(stderr, "[%s]%s: " fmt , TYPE_IMX25_CCM, \
+ __func__, ##args); \
+ } \
+ } while (0)
+
+static char const *imx25_ccm_reg_name(uint32_t reg)
+{
+ static char unknown[20];
+
+ switch (reg) {
+ case IMX25_CCM_MPCTL_REG:
+ return "mpctl";
+ case IMX25_CCM_UPCTL_REG:
+ return "upctl";
+ case IMX25_CCM_CCTL_REG:
+ return "cctl";
+ case IMX25_CCM_CGCR0_REG:
+ return "cgcr0";
+ case IMX25_CCM_CGCR1_REG:
+ return "cgcr1";
+ case IMX25_CCM_CGCR2_REG:
+ return "cgcr2";
+ case IMX25_CCM_PCDR0_REG:
+ return "pcdr0";
+ case IMX25_CCM_PCDR1_REG:
+ return "pcdr1";
+ case IMX25_CCM_PCDR2_REG:
+ return "pcdr2";
+ case IMX25_CCM_PCDR3_REG:
+ return "pcdr3";
+ case IMX25_CCM_RCSR_REG:
+ return "rcsr";
+ case IMX25_CCM_CRDR_REG:
+ return "crdr";
+ case IMX25_CCM_DCVR0_REG:
+ return "dcvr0";
+ case IMX25_CCM_DCVR1_REG:
+ return "dcvr1";
+ case IMX25_CCM_DCVR2_REG:
+ return "dcvr2";
+ case IMX25_CCM_DCVR3_REG:
+ return "dcvr3";
+ case IMX25_CCM_LTR0_REG:
+ return "ltr0";
+ case IMX25_CCM_LTR1_REG:
+ return "ltr1";
+ case IMX25_CCM_LTR2_REG:
+ return "ltr2";
+ case IMX25_CCM_LTR3_REG:
+ return "ltr3";
+ case IMX25_CCM_LTBR0_REG:
+ return "ltbr0";
+ case IMX25_CCM_LTBR1_REG:
+ return "ltbr1";
+ case IMX25_CCM_PMCR0_REG:
+ return "pmcr0";
+ case IMX25_CCM_PMCR1_REG:
+ return "pmcr1";
+ case IMX25_CCM_PMCR2_REG:
+ return "pmcr2";
+ case IMX25_CCM_MCR_REG:
+ return "mcr";
+ case IMX25_CCM_LPIMR0_REG:
+ return "lpimr0";
+ case IMX25_CCM_LPIMR1_REG:
+ return "lpimr1";
+ default:
+ sprintf(unknown, "[%d ?]", reg);
+ return unknown;
+ }
+}
+#define CKIH_FREQ 24000000 /* 24MHz crystal input */
+
+static const VMStateDescription vmstate_imx25_ccm = {
+ .name = TYPE_IMX25_CCM,
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT32_ARRAY(reg, IMX25CCMState, IMX25_CCM_MAX_REG),
+ VMSTATE_END_OF_LIST()
+ },
+};
+
+static uint32_t imx25_ccm_get_mpll_clk(IMXCCMState *dev)
+{
+ uint32_t freq;
+ IMX25CCMState *s = IMX25_CCM(dev);
+
+ if (EXTRACT(s->reg[IMX25_CCM_CCTL_REG], MPLL_BYPASS)) {
+ freq = CKIH_FREQ;
+ } else {
+ freq = imx_ccm_calc_pll(s->reg[IMX25_CCM_MPCTL_REG], CKIH_FREQ);
+ }
+
+ DPRINTF("freq = %d\n", freq);
+
+ return freq;
+}
+
+static uint32_t imx25_ccm_get_upll_clk(IMXCCMState *dev)
+{
+ uint32_t freq = 0;
+ IMX25CCMState *s = IMX25_CCM(dev);
+
+ if (!EXTRACT(s->reg[IMX25_CCM_CCTL_REG], UPLL_DIS)) {
+ freq = imx_ccm_calc_pll(s->reg[IMX25_CCM_UPCTL_REG], CKIH_FREQ);
+ }
+
+ DPRINTF("freq = %d\n", freq);
+
+ return freq;
+}
+
+static uint32_t imx25_ccm_get_mcu_clk(IMXCCMState *dev)
+{
+ uint32_t freq;
+ IMX25CCMState *s = IMX25_CCM(dev);
+
+ freq = imx25_ccm_get_mpll_clk(dev);
+
+ if (EXTRACT(s->reg[IMX25_CCM_CCTL_REG], ARM_SRC)) {
+ freq = (freq * 3 / 4);
+ }
+
+ freq = freq / (1 + EXTRACT(s->reg[IMX25_CCM_CCTL_REG], ARM_CLK_DIV));
+
+ DPRINTF("freq = %d\n", freq);
+
+ return freq;
+}
+
+static uint32_t imx25_ccm_get_ahb_clk(IMXCCMState *dev)
+{
+ uint32_t freq;
+ IMX25CCMState *s = IMX25_CCM(dev);
+
+ freq = imx25_ccm_get_mcu_clk(dev)
+ / (1 + EXTRACT(s->reg[IMX25_CCM_CCTL_REG], AHB_CLK_DIV));
+
+ DPRINTF("freq = %d\n", freq);
+
+ return freq;
+}
+
+static uint32_t imx25_ccm_get_ipg_clk(IMXCCMState *dev)
+{
+ uint32_t freq;
+
+ freq = imx25_ccm_get_ahb_clk(dev) / 2;
+
+ DPRINTF("freq = %d\n", freq);
+
+ return freq;
+}
+
+static uint32_t imx25_ccm_get_clock_frequency(IMXCCMState *dev, IMXClk clock)
+{
+ uint32_t freq = 0;
+ DPRINTF("Clock = %d)\n", clock);
+
+ switch (clock) {
+ case NOCLK:
+ break;
+ case CLK_MPLL:
+ freq = imx25_ccm_get_mpll_clk(dev);
+ break;
+ case CLK_UPLL:
+ freq = imx25_ccm_get_upll_clk(dev);
+ break;
+ case CLK_MCU:
+ freq = imx25_ccm_get_mcu_clk(dev);
+ break;
+ case CLK_AHB:
+ freq = imx25_ccm_get_ahb_clk(dev);
+ break;
+ case CLK_IPG:
+ freq = imx25_ccm_get_ipg_clk(dev);
+ break;
+ case CLK_32k:
+ freq = CKIL_FREQ;
+ break;
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: unsupported clock %d\n",
+ TYPE_IMX25_CCM, __func__, clock);
+ break;
+ }
+
+ DPRINTF("Clock = %d) = %d\n", clock, freq);
+
+ return freq;
+}
+
+static void imx25_ccm_reset(DeviceState *dev)
+{
+ IMX25CCMState *s = IMX25_CCM(dev);
+
+ DPRINTF("\n");
+
+ memset(s->reg, 0, IMX25_CCM_MAX_REG * sizeof(uint32_t));
+ s->reg[IMX25_CCM_MPCTL_REG] = 0x800b2c01;
+ s->reg[IMX25_CCM_UPCTL_REG] = 0x84042800;
+ /*
+ * The value below gives:
+ * CPU = 133 MHz, AHB = 66,5 MHz, IPG = 33 MHz.
+ */
+ s->reg[IMX25_CCM_CCTL_REG] = 0xd0030000;
+ s->reg[IMX25_CCM_CGCR0_REG] = 0x028A0100;
+ s->reg[IMX25_CCM_CGCR1_REG] = 0x04008100;
+ s->reg[IMX25_CCM_CGCR2_REG] = 0x00000438;
+ s->reg[IMX25_CCM_PCDR0_REG] = 0x01010101;
+ s->reg[IMX25_CCM_PCDR1_REG] = 0x01010101;
+ s->reg[IMX25_CCM_PCDR2_REG] = 0x01010101;
+ s->reg[IMX25_CCM_PCDR3_REG] = 0x01010101;
+ s->reg[IMX25_CCM_PMCR0_REG] = 0x00A00000;
+ s->reg[IMX25_CCM_PMCR1_REG] = 0x0000A030;
+ s->reg[IMX25_CCM_PMCR2_REG] = 0x0000A030;
+ s->reg[IMX25_CCM_MCR_REG] = 0x43000000;
+
+ /*
+ * default boot will change the reset values to allow:
+ * CPU = 399 MHz, AHB = 133 MHz, IPG = 66,5 MHz.
+ * For some reason, this doesn't work. With the value below, linux
+ * detects a 88 MHz IPG CLK instead of 66,5 MHz.
+ s->reg[IMX25_CCM_CCTL_REG] = 0x20032000;
+ */
+}
+
+static uint64_t imx25_ccm_read(void *opaque, hwaddr offset, unsigned size)
+{
+ uint32 value = 0;
+ IMX25CCMState *s = (IMX25CCMState *)opaque;
+
+ if (offset < 0x70) {
+ value = s->reg[offset >> 2];
+ } else {
+ qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad register at offset 0x%"
+ HWADDR_PRIx "\n", TYPE_IMX25_CCM, __func__, offset);
+ }
+
+ DPRINTF("reg[%s] => 0x%" PRIx32 "\n", imx25_ccm_reg_name(offset >> 2),
+ value);
+
+ return value;
+}
+
+static void imx25_ccm_write(void *opaque, hwaddr offset, uint64_t value,
+ unsigned size)
+{
+ IMX25CCMState *s = (IMX25CCMState *)opaque;
+
+ DPRINTF("reg[%s] <= 0x%" PRIx32 "\n", imx25_ccm_reg_name(offset >> 2),
+ (uint32_t)value);
+
+ if (offset < 0x70) {
+ /*
+ * We will do a better implementation later. In particular some bits
+ * cannot be written to.
+ */
+ s->reg[offset >> 2] = value;
+ } else {
+ qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad register at offset 0x%"
+ HWADDR_PRIx "\n", TYPE_IMX25_CCM, __func__, offset);
+ }
+}
+
+static const struct MemoryRegionOps imx25_ccm_ops = {
+ .read = imx25_ccm_read,
+ .write = imx25_ccm_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+ .valid = {
+ /*
+ * Our device would not work correctly if the guest was doing
+ * unaligned access. This might not be a limitation on the real
+ * device but in practice there is no reason for a guest to access
+ * this device unaligned.
+ */
+ .min_access_size = 4,
+ .max_access_size = 4,
+ .unaligned = false,
+ },
+};
+
+static void imx25_ccm_init(Object *obj)
+{
+ DeviceState *dev = DEVICE(obj);
+ SysBusDevice *sd = SYS_BUS_DEVICE(obj);
+ IMX25CCMState *s = IMX25_CCM(obj);
+
+ memory_region_init_io(&s->iomem, OBJECT(dev), &imx25_ccm_ops, s,
+ TYPE_IMX25_CCM, 0x1000);
+ sysbus_init_mmio(sd, &s->iomem);
+}
+
+static void imx25_ccm_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ IMXCCMClass *ccm = IMX_CCM_CLASS(klass);
+
+ dc->reset = imx25_ccm_reset;
+ dc->vmsd = &vmstate_imx25_ccm;
+ dc->desc = "i.MX25 Clock Control Module";
+
+ ccm->get_clock_frequency = imx25_ccm_get_clock_frequency;
+}
+
+static const TypeInfo imx25_ccm_info = {
+ .name = TYPE_IMX25_CCM,
+ .parent = TYPE_IMX_CCM,
+ .instance_size = sizeof(IMX25CCMState),
+ .instance_init = imx25_ccm_init,
+ .class_init = imx25_ccm_class_init,
+};
+
+static void imx25_ccm_register_types(void)
+{
+ type_register_static(&imx25_ccm_info);
+}
+
+type_init(imx25_ccm_register_types)
@@ -19,7 +19,7 @@
#include "hw/arm/arm.h"
#include "hw/intc/imx_avic.h"
-#include "hw/misc/imx31_ccm.h"
+#include "hw/misc/imx25_ccm.h"
#include "hw/char/imx_serial.h"
#include "hw/timer/imx_gpt.h"
#include "hw/timer/imx_epit.h"
@@ -44,7 +44,7 @@ typedef struct FslIMX25State {
/*< public >*/
ARMCPU cpu;
IMXAVICState avic;
- IMX31CCMState ccm;
+ IMX25CCMState ccm;
IMXSerialState uart[FSL_IMX25_NUM_UARTS];
IMXGPTState gpt[FSL_IMX25_NUM_GPTS];
IMXEPITState epit[FSL_IMX25_NUM_EPITS];
new file mode 100644
@@ -0,0 +1,79 @@
+/*
+ * IMX25 Clock Control Module
+ *
+ * Copyright (C) 2012 NICTA
+ * Updated by Jean-Christophe Dubois <jcd@tribudubois.net>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#ifndef IMX25_CCM_H
+#define IMX25_CCM_H
+
+#include "hw/misc/imx_ccm.h"
+
+#define IMX25_CCM_MPCTL_REG 0
+#define IMX25_CCM_UPCTL_REG 1
+#define IMX25_CCM_CCTL_REG 2
+#define IMX25_CCM_CGCR0_REG 3
+#define IMX25_CCM_CGCR1_REG 4
+#define IMX25_CCM_CGCR2_REG 5
+#define IMX25_CCM_PCDR0_REG 6
+#define IMX25_CCM_PCDR1_REG 7
+#define IMX25_CCM_PCDR2_REG 8
+#define IMX25_CCM_PCDR3_REG 9
+#define IMX25_CCM_RCSR_REG 10
+#define IMX25_CCM_CRDR_REG 11
+#define IMX25_CCM_DCVR0_REG 12
+#define IMX25_CCM_DCVR1_REG 13
+#define IMX25_CCM_DCVR2_REG 14
+#define IMX25_CCM_DCVR3_REG 15
+#define IMX25_CCM_LTR0_REG 16
+#define IMX25_CCM_LTR1_REG 17
+#define IMX25_CCM_LTR2_REG 18
+#define IMX25_CCM_LTR3_REG 19
+#define IMX25_CCM_LTBR0_REG 20
+#define IMX25_CCM_LTBR1_REG 21
+#define IMX25_CCM_PMCR0_REG 22
+#define IMX25_CCM_PMCR1_REG 23
+#define IMX25_CCM_PMCR2_REG 24
+#define IMX25_CCM_MCR_REG 25
+#define IMX25_CCM_LPIMR0_REG 26
+#define IMX25_CCM_LPIMR1_REG 27
+#define IMX25_CCM_MAX_REG 28
+
+/* CCTL */
+#define CCTL_ARM_CLK_DIV_SHIFT (30)
+#define CCTL_ARM_CLK_DIV_MASK (0x3)
+#define CCTL_AHB_CLK_DIV_SHIFT (28)
+#define CCTL_AHB_CLK_DIV_MASK (0x3)
+#define CCTL_MPLL_BYPASS_SHIFT (22)
+#define CCTL_MPLL_BYPASS_MASK (0x1)
+#define CCTL_USB_DIV_SHIFT (16)
+#define CCTL_USB_DIV_MASK (0x3F)
+#define CCTL_ARM_SRC_SHIFT (13)
+#define CCTL_ARM_SRC_MASK (0x1)
+#define CCTL_UPLL_DIS_SHIFT (23)
+#define CCTL_UPLL_DIS_MASK (0x1)
+
+#define EXTRACT(value, name) (((value) >> CCTL_##name##_SHIFT) \
+ & CCTL_##name##_MASK)
+#define INSERT(value, name) (((value) & CCTL_##name##_MASK) << \
+ CCTL_##name##_SHIFT)
+
+#define TYPE_IMX25_CCM "imx25.ccm"
+#define IMX25_CCM(obj) OBJECT_CHECK(IMX25CCMState, (obj), TYPE_IMX25_CCM)
+
+typedef struct IMX25CCMState {
+ /* <private> */
+ IMXCCMState parent_obj;
+
+ /* <public> */
+ MemoryRegion iomem;
+
+ uint32_t reg[IMX25_CCM_MAX_REG];
+
+} IMX25CCMState;
+
+#endif /* IMX25_CCM_H */
With this CCM, i.MX25 timer is accurate with "real world time". Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by Peter Crosthwaite <crosthwaite.peter@gmail.com> --- Changes since v1: * rework loging to match other i.MX drivers Changes since v2: * We moved to an inheritance QOM scheme Changes since v3: * Rework logging based on comments. Changes since v4: * Improve debug logging. Changes since v5: * move object state to uint32 array. hw/arm/fsl-imx25.c | 2 +- hw/misc/Makefile.objs | 1 + hw/misc/imx25_ccm.c | 341 ++++++++++++++++++++++++++++++++++++++++++++ include/hw/arm/fsl-imx25.h | 4 +- include/hw/misc/imx25_ccm.h | 79 ++++++++++ 5 files changed, 424 insertions(+), 3 deletions(-) create mode 100644 hw/misc/imx25_ccm.c create mode 100644 include/hw/misc/imx25_ccm.h