diff mbox series

[v2,2/2] hw/riscv/virt-acpi-build.c: Generate SPCR table

Message ID 20240116010930.43433-3-jeeheng.sia@starfivetech.com
State New
Headers show
Series RISC-V: ACPI: Enable SPCR | expand

Commit Message

JeeHeng Sia Jan. 16, 2024, 1:09 a.m. UTC 
Generate Serial Port Console Redirection Table (SPCR) for RISC-V
virtual machine.

Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
---
 hw/riscv/virt-acpi-build.c | 39 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

Comments

Alistair Francis Feb. 15, 2024, 3:29 a.m. UTC | #1 
On Tue, Jan 16, 2024 at 11:11 AM Sia Jee Heng
<jeeheng.sia@starfivetech.com> wrote:
>
> Generate Serial Port Console Redirection Table (SPCR) for RISC-V
> virtual machine.
>
> Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com>
> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>

Alistair

> ---
>  hw/riscv/virt-acpi-build.c | 39 ++++++++++++++++++++++++++++++++++++++
>  1 file changed, 39 insertions(+)
>
> diff --git a/hw/riscv/virt-acpi-build.c b/hw/riscv/virt-acpi-build.c
> index 26c7e4482d..7fc5071c84 100644
> --- a/hw/riscv/virt-acpi-build.c
> +++ b/hw/riscv/virt-acpi-build.c
> @@ -174,6 +174,42 @@ acpi_dsdt_add_uart(Aml *scope, const MemMapEntry *uart_memmap,
>      aml_append(scope, dev);
>  }
>
> +/*
> + * Serial Port Console Redirection Table (SPCR)
> + * Rev: 1.07
> + */
> +
> +static void
> +spcr_setup(GArray *table_data, BIOSLinker *linker, RISCVVirtState *s)
> +{
> +    AcpiSpcrData serial = {
> +        .interface_type = 0,       /* 16550 compatible */
> +        .base_addr.id = AML_AS_SYSTEM_MEMORY,
> +        .base_addr.width = 32,
> +        .base_addr.offset = 0,
> +        .base_addr.size = 1,
> +        .base_addr.addr = s->memmap[VIRT_UART0].base,
> +        .interrupt_type = (1 << 4),/* Bit[4] RISC-V PLIC/APLIC */
> +        .pc_interrupt = 0,
> +        .interrupt = UART0_IRQ,
> +        .baud_rate = 7,            /* 15200 */
> +        .parity = 0,
> +        .stop_bits = 1,
> +        .flow_control = 0,
> +        .terminal_type = 3,        /* ANSI */
> +        .language = 0,             /* Language */
> +        .pci_device_id = 0xffff,   /* not a PCI device*/
> +        .pci_vendor_id = 0xffff,   /* not a PCI device*/
> +        .pci_bus = 0,
> +        .pci_device = 0,
> +        .pci_function = 0,
> +        .pci_flags = 0,
> +        .pci_segment = 0,
> +    };
> +
> +    build_spcr(table_data, linker, &serial, 2, s->oem_id, s->oem_table_id);
> +}
> +
>  /* RHCT Node[N] starts at offset 56 */
>  #define RHCT_NODE_ARRAY_OFFSET 56
>
> @@ -555,6 +591,9 @@ static void virt_acpi_build(RISCVVirtState *s, AcpiBuildTables *tables)
>      acpi_add_table(table_offsets, tables_blob);
>      build_rhct(tables_blob, tables->linker, s);
>
> +    acpi_add_table(table_offsets, tables_blob);
> +    spcr_setup(tables_blob, tables->linker, s);
> +
>      acpi_add_table(table_offsets, tables_blob);
>      {
>          AcpiMcfgInfo mcfg = {
> --
> 2.34.1
>
>
diff mbox series

Patch

diff --git a/hw/riscv/virt-acpi-build.c b/hw/riscv/virt-acpi-build.c
index 26c7e4482d..7fc5071c84 100644
--- a/hw/riscv/virt-acpi-build.c
+++ b/hw/riscv/virt-acpi-build.c
@@ -174,6 +174,42 @@  acpi_dsdt_add_uart(Aml *scope, const MemMapEntry *uart_memmap,
     aml_append(scope, dev);
 }
 
+/*
+ * Serial Port Console Redirection Table (SPCR)
+ * Rev: 1.07
+ */
+
+static void
+spcr_setup(GArray *table_data, BIOSLinker *linker, RISCVVirtState *s)
+{
+    AcpiSpcrData serial = {
+        .interface_type = 0,       /* 16550 compatible */
+        .base_addr.id = AML_AS_SYSTEM_MEMORY,
+        .base_addr.width = 32,
+        .base_addr.offset = 0,
+        .base_addr.size = 1,
+        .base_addr.addr = s->memmap[VIRT_UART0].base,
+        .interrupt_type = (1 << 4),/* Bit[4] RISC-V PLIC/APLIC */
+        .pc_interrupt = 0,
+        .interrupt = UART0_IRQ,
+        .baud_rate = 7,            /* 15200 */
+        .parity = 0,
+        .stop_bits = 1,
+        .flow_control = 0,
+        .terminal_type = 3,        /* ANSI */
+        .language = 0,             /* Language */
+        .pci_device_id = 0xffff,   /* not a PCI device*/
+        .pci_vendor_id = 0xffff,   /* not a PCI device*/
+        .pci_bus = 0,
+        .pci_device = 0,
+        .pci_function = 0,
+        .pci_flags = 0,
+        .pci_segment = 0,
+    };
+
+    build_spcr(table_data, linker, &serial, 2, s->oem_id, s->oem_table_id);
+}
+
 /* RHCT Node[N] starts at offset 56 */
 #define RHCT_NODE_ARRAY_OFFSET 56
 
@@ -555,6 +591,9 @@  static void virt_acpi_build(RISCVVirtState *s, AcpiBuildTables *tables)
     acpi_add_table(table_offsets, tables_blob);
     build_rhct(tables_blob, tables->linker, s);
 
+    acpi_add_table(table_offsets, tables_blob);
+    spcr_setup(tables_blob, tables->linker, s);
+
     acpi_add_table(table_offsets, tables_blob);
     {
         AcpiMcfgInfo mcfg = {